Specifications:
Power Input: DC 9-32V
Current:2.8A
Cooling Belt Material: Copper
Working Tem: -20~85℃
Power: 40W/Set (20W/each bulb)
Lumens: 4000LM/Set (2000LM/each bulb)
Beam Angel: 360°
Working efficiency: 98%
Lifespan: > 30,000 Hours
Waterproof Level: IP68
Material: Aluminum alloy
Color Temperature: 6000K white
 
Feature:
1.Simple plug and play bulbs with the TXVSO8 of 6000K color scheme. It features 360 degrees of super bright white LED lighting.
2.Super Bright , 4000LM Per Bulb
3.Best cooling effect , Heat pipe Technology
4.Waterproof:IP65,can be used in any water conditions
5.No Ballast or Driver needed and with Fan ( Never worry about Ballast or Driver )
6.More stable performance, Operating Temperature -40C -- +105C
7.Quick start; Fast on/off response time
8 Long working life : Advanced heat dissipation , Working life is up to 30000 hours
9.Easy installation : All in one model , same as car original bulb , Plug and Play
10 .Perfect 360 degrees beam pattern : Add COB Lamp Beams, increasing lighting angel from 120 degrees up to 175 degrees, eliminating the dark areas.
11.Using Can bus to decode most high-end car systems and make the led bulb works!
 

Advantages compared to Halogen & HID bulbs:
Fast ON/OFF, NO "warm up"
Energy Saving 70% when compared to the regular halogen bulbs & has a life span 3 times longer than them.
Safe for driving
Legal Installation. No Worries for State Law.
 
Package Included:
2 X Hight Beam LED Headlight Bulbs
2 X Low Beam LED Headlight Bulbs
2 X LED Fog Light Bulbs
 
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
 

DataCaciques