Features:

• Customisable to your needs
• Available in a gloss or matte finish in a wide variety of colours (see the colour chart in the product gallery)
• Available in four sizes
• Price includes a decal for each side of your vehicle.

Additional notes:

• Sizes stated on the listing are an approximate
• Requires trimming around wheel arch.
• All images within the listing are of the product for sale
• Any customisation will be cut from the decal; the logo or text will be the colour of your bodywork.

Available colours

Application Instructions

Please avoid applying this product in extreme weather conditions, including very hot, cold, or windy environments. Do not apply it in direct, hot sunlight. Like all vinyl materials, high temperatures can cause the product to become overly soft, making it prone to tearing or stretching. Conversely, low temperatures can reduce the effectiveness of the adhesive, preventing proper bonding to the surface.

Required Materials

• Trimming tool
• Squeegee

Surface Preparation 

Before application, thoroughly clean the surface to remove any dirt, grit, or grease. Use an appropriate cleaning product—ideally an alcohol-based surface cleaner as some cleaners may leave behind a residue that can hinder adhesion. Alcohol-based products evaporate cleanly and are generally most effective. 

Prepare the Decal 

Use a squeegee to firmly rub across the decal while it is still on the backing paper. This helps eliminate any air bubbles and ensures the decal adheres well to the transfer tape. 

Separate Backing Paper from Transfer Tape 

Carefully peel back the transfer tape from the backing paper. The decal should lift cleanly with the tape. If parts of the decal remain stuck to the backing paper, lay the tape back down and rub firmly again with the squeegee.  

Position the Decal 

Align the decal carefully to its final position. Once satisfied with the placement, apply the decal to the surface. 

Apply and Secure 

Firmly press down over the entire decal using your squeegee to ensure full adhesion. 

Remove the Transfer Tape 

Slowly peel the transfer tape back at a sharp angle. If the decal begins to lift with the tape, lay it back down and press firmly again before retrying. 

Trim as Needed 

Use a precision blade to trim the decal to fit, if required. 

Additional Notes 

For challenging surfaces such as textured plastics, you may need to assist adhesion manually. Hold the revealed portion of the decal in place with your thumb while gently peeling off the application tape. I

f air bubbles form beneath the decal, work them out gently using your thumb or the soft edge of the squeegee. A small pin can also be used to release trapped air. 

If you used soapy water to aid installation, allow the decal to dry completely before using the vehicle. Ideally, wait at least 24 hours. In colder or wetter conditions, additional drying time may be required.