Item is used but in excellent condition. Has been tested and is  fully functional.

• Controls up to four or eight 1000W high intensity discharge (HID) ballasts, including both metal halide (MH) and high pressure sodium (HPS) lighting systems.
• Integrated 120V trigger cable facilitates any timed lighting sequence when connected to a standard 24-hour timing device
• Green LED indicator illuminates when light controller. is activated and ON via the trigger cable function.
• Composed of high-quality components for reliable, long-term performance.

• SPECIFICATIONS:

• Main Power Voltage: 120V OR 240V
• Receptacle Type: 8 Universal Outlets
• 120V Max Wattage: 4000W total
• 240V Max Wattage: 8000W total/1000W per Outlet
• Max Amperage: 50A
• Trigger Cable Voltage: 120V
• Operating Temperature Range: 32-110°F
• Operating Humidity Range: 0-99% RH Noncondensing

Minimum Relay Operations: 100,000 @ Full Load

Main Power Requirements :

The main power source must be supplied for the lights to function.

8 Outlets Light Controller, Use only a 50A, 2-pole circuit breaker and #6 AWG wire to provide the main power.

Proper connection of the ground wire to the ground lug is critical for safe operation.

The Light Controller with universal 120/240V receptacles can be used to operate 120V devices ONLY IF the main power is also wired in at 120V.

Installation Notice：

DO NOT connect ballasts to the Light Controller until AFTER the main power has been properly installed.

Verify trigger cable is disconnected from the external timer or controller.

Connect ballast power cables to the receptacles on the Light Controller.

Connect the trigger cable to the external timer or controller.