Plastic headlights can yellow over time, reducing the brightness of headlights which are sometimes very expensive to replace.
The kit renews the headlights 3M restores the transparency of the front and rear plastic headlights, fog lights and directional lights. By restoring the original shine, the headlight performance and appearance of the vehicle are greatly improved.
Thanks to the headlight renewal kit from 3M you will achieve professional results with the help of a home drill (1200-1600 rpm). The kit contains all the products needed for the application, excluding the drill and a clean cloth and a spray bottle.
In the past, replacing scratched, cloudy or yellowed headlights was an expensive necessity to maintain vehicle safety. Now with the kit to renew your headlights 3M, car and motorcycle owners can renew the appearance of plastic headlights (front, rear, fog lights and directional lights) at a low cost.
Matted plastic headlights
Plastic surfaces are lightweight and durable, ideal for modern vehicles. These surfaces, however, can yellow and become dull due to atmospheric conditions, sun and dust, limiting visibility and causing a deterioration in the overall appearance of the vehicle.
If appearance has a subjective importance, the dangers deriving from limited visibility do not: around 3 million accidents a year, thousands of which cause damage or death to people.
Non-functioning bulbs and cloudy headlights can cause reduced visibility, putting you, your passengers and other cars at risk.
Millions of cars in circulation today have plastic headlights which, over the years, undergo deterioration which can even prevent them from passing the inspection required by the highway code.
Luckily there is a solution!
The DIY solution
The kit renews headlights 3M was developed to provide a car headlight restoration solution for DIY enthusiasts. The kit contains abrasives of different grits, the backing pad, the polishing pad, the polish and the instructions for use; everything you need together with your home drill to solve the problem of cloudy and yellowed headlights. The kit can also be used on other plastic surfaces to restore their transparency.
Limitations of Liability
3M cannot be held responsible for direct, indirect, special, accidental and consequential damages to people and things resulting from improper or incorrect use of its products.
How does it work?
The steps to use the headlight renewal kit 3M there are only 3! First, sand the dulled surface in two stages using the sanding pad included in the kit, until the surface is uniformly treated and the dullness is removed. Afterwards, polish with polish 3M and the corresponding sponge pad until the desired level of transparency is obtained.
In addition to the domestic drill (1200-1600 rpm) to be used for sanding and polishing, it is recommended to apply masking tape around the headlight 3M supplied in the kit, to protect the surrounding area and a water spray bottle for use with the sanding disc 3M Trizact (the finest gray one).
Kit contents:
- 1 sanding pad
- 1 spongy interface
- 6 3M sanding discs
- 4 3M finishing discs
- 1 3M Trizact disc
- 1 3M polish for lights
- 1 sponge pad
- Instructions for Use