|
|
|
|
|
|
|
|
|
|
Specifications
- Condition: New
- Color:Black
- Warranty:10 Year
Package Include
- 2 x Part# K80771 Front Lower Ball Joint
- Upper Ball Joints come Pre-Assembled onto the Upper Control Arms
- 1 x Part# K8708T Front Left Upper Control Arm and Ball Joint Assembly
- 1 x Part# K80068 Front Right Upper Control Arm and Ball Joint Assembly - 1 Piece Design Arm
Fits the following vehicles
- 2002-2011 FORD RANGER
- 2002-2007 MAZDA B3000
- 2002-2009 MAZDA B4000
Note
- Please be sure you review the compatibility information.
- If you have a question about the part please free contact us before buying, we will give you a best reply in time.
- We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.
Replacement Guideline
Ball joints
- Purchase the correct replacement ball joint assembly for your vehicle.
- Remove the wheel and access the ball joint.
- Soak all the bolts with WD-40 or PB Blaster.
- Pull the cotter pin and loosen the large castellated nut.
- Pop loose the ball joint.
- Remove the allen bolts and slide the control arm free.
- Guide the new joint through the knuckle hole.
- Bolt the joint into place using the hardware included.
- Torque the bolts to the proper specifications.
- Screw in the new grease fitting and pump grease into the assembly.
Control Arms
- lift the vehicle using a car lift, ideally a wheel-free four-post car lift
- loosen and remove the corresponding stabiliser fixing screws.
- Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller).
- Remove the old control arm
- Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner
- Fit the new control arm with the supplied accessories and attach new fixing screws and nuts.
- Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm.
- lower the vehicle until the suspension is compressed
- Tighten the fixing screws with the torque stipulated by the vehicle manufacturer.
- Lower the vehicle all the way.
- Measure the chassis and adjust if necessary.
- Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm.
- To conclude, test-drive the vehicle.
Bad Control arm symptons
- popping noise
- steering is unstable
- uneven tire wear
Signs of a ball joint breaks
- Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
- Steering-The steering sloppy or stiff
- Tires -Uneven tire wear
Infiuence of a bad joint break
- Causing mysterious clunking noise or drifting steering
- Affecting your steering and suspension seriously
Importance of Control Arms
- It is a link that connects the frame of the car to the wheel hub assembly or steering knuckle.
- It allows a driver to steer a car while also guiding the wheels up and down with the road surface.
- They have a vital role in a vehicle's overall stability and drivability.
| Item Specifics | |
|---|---|
| Placement on Vehicle | Front, Left, Right, Upper, Lower |
| Brand | auspartshouse |
| Manufacturer Part Number | 10409830 |
| Number of Kit Pieces | 4pcs |
| Manufacturer Warranty | 10 Years |
| Fitment Type | Direct Replacement |
| Mounting Hardware Included | No |
| Interchange Part Number | K80068 |
| Suspension Grade | Standard |
| Custom Bundle | Yes |
| Modified Item | No |
| Color | Black |
| Surface Finish | Polished |
| Packaging | New in Box |
| Type | Control Arm & Ball Joint Assembly |
| Adjustable | Yes |
| Greasable | Yes |
| Superseded Part Number | K80771 |
| OE/OEM Part Number | K8708T |
| Vintage Car Part | No |
| Performance Part | Yes |
| Universal Fitment | No |
2. We only ship to the address in order provided to us. Your order address will be the shipping address.
4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.
We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Any question or problem, please feel free to contact us via ebay message.
Shop Category Hot Item
New List Item
|
4x Front Upper Control Arms Lower Ball Joints For 02-11 Ford Ranger Mazda B3000
Specifications
Package Include
Fits the following vehicles
Note
Replacement Guideline Ball joints
Control Arms
Bad Control arm symptons
Signs of a ball joint breaks
Infiuence of a bad joint break
Importance of Control Arms
Payment:
We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
Payment Options: Any payment which can be accepted by ebay.
If you want to change the shipping address, please contact us by eBay messages within 12 hours.
Payment must be received within 10 days as auction ended or order might be delayed.
Shipping:
2. We only ship to the address in order provided to us. Your order address will be the shipping address. 4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns:
1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility. Feedback:
We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Contact Us:
Any question or problem, please feel free to contact us via ebay message. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
