Snapper/Snappi/Snappy Clamp
Ideal for clamping 19mm, or ¾" outside diameter hoses, but will clamp slightly thinner or thicker diameters - see key below
Useful for a number of applications.
- Will not rust or corrode
- Installation and removal can be five times faster than conventional clamps
- Completely reusable - Can be opened by sliding the teeth sideways
- Safety engineered
- No protruding band or cluster
- Can be installed with hose in place
- Will not damage hose
- One hand installation for tight places
- Stays round, does not distort oval when clamping
- No specialist tools required - just a pair of pliers or similar
- Compression limit prevents hose damage due to excessive clamping. Hose is clamped not crushed
- Replaces Evinrude/Johnson/OMC/BRP Part number 0329653
- Priced Each Clamp (4 shown on main photo)
Key for drawing - Approximate dimensions
A Minimum clamp diameter 17.8mm (.702" - 45/64") Fully closed
B Maximum clamp diameter 20.4mm (.801" - 51/64") With 2 teeth engaged
C Strap Width 5.90mm (0.223")
D Strap Thickness 1.70mm, (0.067")
E Clamp Open 26mm (1.02")
F Clamp Fully Closed 18mm (.71")
8 Teeth