Polk Audio PAD4000.4 800w RMS 4-Channel Marine Boat Amplifier+Amp Kit PA D4000.4
Click Thumbnails to Enlarge
Condition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 1 YEAR AUDIOSAVINGS
Package Includes:
- (1) Polk Audio PAD4000.4 4-Channel 800 Watt RMS Car Audio Amplifier Amp PA D4000.4
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
- (1) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin
Authorized Polk Dealer!
Features:
- Polk Audio PAD4000.4 4-Channel 800 Watt RMS Car Audio Amplifier Amp PA D4000.4
- Super-Eefficient Class D Design - Runs much cooler than conventional amps.
- High-Speed MOSFET - Switching power supply.
- Toroidal Transformers - Help keep the amplifier's sleek design under 2" tall while ensuring plenty of clean, efficient power.
- Protection - Thermal, DC offset, reverse DC voltage and short circuit protection.
- Nickel-Plated Wire Terminals & RCA Connectors - Ensure maximum signal transfer.
- Front & Rear Level Controls - Adjust the gain of the front and rear channels to match the output voltage from your head unit.
- Low-Pass & High-Pass Frequency Controls - Enables you to adjust crossover overlap for better blending of speakers.
- Front & Rear BPF, FULL, HPF Switches - Selects full range, high pass filter, or bandpass filter to dial in your speaker blending.
- Channel Mode Switch (ST/4Ch) - In the Stereo position, the amplifier will send the same signal to front and rear channels.
- Stainless Steel Hardware - Used throughout won't corrode in humid environments.
Specifications:
- Type: Bridgeable Class D MOSFET
- Channels: 4 channel
- RMS Continuous Power @ 4 Ohms: 125 W x 4
- RMS Continuous Power @ 2 Ohms: 200 W x 4
- Power Bridged @ 4 Ohms: 400 W x 2
- Distortion at Rated Power: <0.1%
- Minimum Impedance Bridged: 4 Ohms
- Minimum Impedance Not Bridged: 2 Ohms
- Signal-to-noise Ratio: 105 dB
- Frequency Response: 20 Hz-20 kHz
- Damping Factor: >100
- Crossover Filter Slope: 12 dB/octave
- Filter Switch (Front): 3-position (HPF, Full, BPF)
- High Pass Filter Frequency Range (Front): 20 Hz - 4 kHz
- Low Pass Filter Frequency Range (Front): 50 Hz - 5 kHz
- Front Gain Control: 200 mV - 6 V
- Filter Switch (Rear): 3-position (HPF, Full, BPF)
- High Pass Filter Frequency Range (Rear): 20 Hz - 4 kHz
- Low Pass Filter Frequency Range (Rear): 50 Hz - 5 kHz
- Rear Gain Control: 200 mV - 6 V
- Line Level Inputs
- LED Power Indicator
- LED Protection Indicator
- Supply Voltage: 10 V - 16 V
- Fusing & Power/Type: (1) 40A (1) 35A ATC
- Power Connections: 4 AWG
- Ground Connections: 4 AWG
- Speaker Connections: 12 AWG
- Height: 1 13/16" (46 mm)
- Depth: 6 3/4" (171.5 mm)
- Width: 10 15/16" (277.8 mm)
- Width w/ Terminal Adaptor: 11 11/16" (296.9 mm)
- Weight: 5 lbs (2.7 kg)
Advantages of buying from an authorized seller:
- Best prices - We sell all Polk Audio Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Polk Audio product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Polk Audio from an unauthorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25' Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
Description:
Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Features:
- Rockville MRCA25 RCA Interconnect Cable
- 25' Ultra-Flexible PVC Shield
- Twisted Pair
- Premium Audiophile Marine RCA Interconnect Cable
- High Performance Water Proof RCA Plugs
- Tinned Copper Strands for Sonic Purity
- Outstanding Noise Rejection, Accuracy, and Frequency Response
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer
satisfaction and therefore offer free return shipping within 30 days of purchase
on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give
you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any
reason within the first 30 days of when it was delivered to you; you have the
following options:
- We will send you a pre-paid shipping label to replace the item for a brand new one.
- We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
- If you are returning a working item in used condition for a refund there will be a
20% used item fee deducted from your refund. All replacements and exchanges are
free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.