|


USCamera Custom Light Seal
Kits
Yashica Electro 35 Rangefinder - 35mm Film Camera
Special - Buy 2 Kits Get 1 Free
These USCamera light seal kits
are custom cut for the Yashica Electro 35 rangefinder film cameras. Each
7
piece kit includes 2 door channel seals lower/upper on the body, 1 back cover door latch seal,
2 short channel seals on back cover latch end, 1 hinge seal on the back cover,
plus the rewind shaft seal.
You will need to remove the top cover to remove and replace the rewind shaft
seal.
All seals have the adhesive already applied. Just peel off the backing and
press into place.
This purchase is for three complete light seal kits.
Our kits are made with Top Quality imported black open cell foam.
See our website for
detailed removal, installation instructions,
and seal placement guide.
Ebay no longer allows us to
provide you a link to the instructions here.



What makes a premium USCamera light
seal kit?
USCamera light seal kits were designed and used by technicians years before the
internet. The same quality kits we sell today.
Our kits start with imported premium quality black open cell foam from Japan. The same
type of foam camera engineers designed cameras to use. For every kit we make, we
have samples of that equipment ... cameras, film backs, viewfinders, and more. Our kits start
with accurate measurements taken directly from the sample. Many times we can
compare those measurements to brand new original factory seals we still have in
stock. Then we use
various widths of material to find the perfect fit for the door channels and
where additional seals are required. We guarantee them to fit the equipment
listed. All seal kits are randomly checked for the correct number of seals and
proper fit by actually installing the sample kit.
Why buy a kit? You can save time and be confident knowing you are installing a
proven product. Sure, you can save money by purchasing bulk foam material and
cutting your own kits. We found it takes 1 - 2 hours to measure, cut and fit a
custom cut kit. The more kits you make the better you get. Cutting open cell
foam takes practice. However, even technicians who have cut foam for years have
problems cutting thin strips accurately and consistently.
Your equipments value could be affected by using anything other than type of
seals/material than what the engineers originally installed. Premium black open
cell foam with high pore count per 25mm. Light seal foam is a specialty item.
Requiring very tight thickness tolerances, close to 1.5%.
You can save money and use yarn. Some people suggest that on the internet. Yarn
had a lot of "fuzzies" exposed in the door channel. In the past, we tried yarn
to preserve some collectable cameras perceived value. We found it time consuming
to work with. I am sure you would get better with experience however it is very
difficult to produce a clean install. Small pieces of yarn debris, furry looking
particles, dirt or ? on the negatives......get the picture.
You can bow a cameras back cover and make it hard to close, if too thick of any
material is used in the camera body door channels or back cover. You do not have
to worry about that with a USCamera light seal kit.
Camera design engineers had various materials available to them as camera
designs improved over the years. They used and still use premium grade open cell
foam in imaging equipment.
|
|
|
|
Image(s) shown of the actual item. Unless we describe the item otherwise, you
should expect it to be new. Please read our descriptions and look at the images
carefully. If something is not shown in the images or not listed in the
description then it is not included. This kit
will only fit the model(s) listed. Just because the picture
looks like or identical to the pieces you believe your equipment will require,
does not mean this kit will fit your equipment. Again if your
equipment make and model is not listed in the ad, this kit will not fit your equipment. If you have
any questions,
please ask before you purchase.
We have graded this item as New condition.
For more information on our grading system go
here.

Shipping:
We print shipping labels
out through PayPal. Please make sure your shipping address
with PayPal and eBay are correct. We are happy to combine
items for shipping. Free shipping to US addresses only.
Payment:
Please complete payment arrangements
within 48 hours from close of auction.

USCamera has been
serving photo enthusiasts on the web since 1998.
You may
email us any time.
Email answered within 48 hours,
except on weekends and Holidays.

©USCamera.
All rights reserved.
Material and images on this page are the copyrighted
property of USCamera
and may not be used without the prior written permission of
USCamera.
|
 
|