Deco Color Epoxy Keramik Quick Drying Bath Paint RAL 9016 White Gloss 400ml

Deco Color Epoxy Keramik Quick Drying Bath Paint RAL 9016 White Gloss

Perfect for Bath,Sink,Refrigerator and other White Appliance Suitable for painting white surfaces

To cover small chips and scratches apply multiple thin layers

Produce durable high gloss surface , resistant to temperature , scratching and cracking.

White Epoxy Lacquer paint that guarantees high quality coating.

Special composition ensures obtaining of hard surface with a high covering power, high whiteness degree and lasting gloss.

• Perfect for painting refrigerators, washing machines , bathtubs , sinks , shower trays , tools , furniture, woodwork
• Resistant to temperatures up to 100 C
• Capacity 400ml
• Colour :White RAL 9016

Please note that colour may not be a perfect match for any and all appliance as there is so many shades of white

How To Use

The surface to be painted should be clean and free of grease.

The preparation of surface is crucial for ensuring a good result.

Clean the bath using abrasive cleaner and rinse thoroughly

Sanding surface with very fine sand paper would also be advised.

The best result can be achieved by painting at a temperature of 15 - 25  painting indoors make sure to cover all surfaces near by , mirrors etc if in bathroom, as an invisible particles of dust from spray paint may cumulate on surfaces causing white sediment

Remove the protective cover.

Shake the container vigorously for about one minute, allowing it to mix and even the color of the paint and prevent clogging the nozzle

Apply the paint while holding the container at a distance of 30 cm from the surface.

Press firmly and do the monotonous rhythmical, smooth movements during painting.

Several thin coats will give a much better end result than one thick coat of paint applied.

Wait few minutes between the coats White lacquer paint drying time:

After 20-25 minutes paint is resistant to touch, the full resistance of the coating is obtained after 18 - 24 hours.

After finishing the work, clean the spray button, turning the container upside down, pressing the button for two seconds