About this item

• PREMIUM PEEL AND STICK TILES - The art3d peel and stick tiles are made of eco-friendly material, resistant to heat and moisture, easy wipe to remove the stains. Suitable for smooth and clean surfaces. Stick to wall without extra glue.
• 1.4 TIMES COVERAGE AREA - the size of Art3d peel and stick tile is around 12"x12", which covers 40% more area than a 10"x10" tile covers.
• 10-SHEET PACKAGE - come in one box of 10 sheets premium quality 3-D gel-like tiles, total covers around 9 square feet area (The total coverage area is NOT 10 square feet because of the overlap area )
• EASY DO IT YOURSELF - stick on backsplash tiles for kitchen or bathroom, self adhesive, steady sticky, according to the size can be a good stitching installation can be bent to corner, no grout, no glue, no mess, no special tools and no experience needed.
• WIDELY USE RANGE - It can be applied to decor the kitchen island walls, bathroom backsplashes, bedroom walls, laundry rooms etc, transform your living space from ordinary to extraordinary with these unique stick on tiles for backsplash!

Easy Do It Yourself

 

1. Wash the surface and grout lines with a powerful grease remover and wait for it to dry.

 

2. Measure and mark the self-adhesive backsplashtile. 

 

 3. If necessary, cut the peel and stick tiles by using a cutter or sharp scissors.

 

4. Now align and stick the Art3d Tiles at your own pace.

 

 

Kindly Remind

 

1.Tiles should not directly contact with flames, steam or submerse in water. Do not install tiles less than 16 inches away from the top of stove.

 

2.Rough surfaces such as porous wood, embossed ceramic tiles or textured wallpaper are not suitable to install.

 

3.The curing period is 2 days after you install them on your wall (21 days for the freshly painted walls).

 

4.The new arrived peel and stick wall tiles may have little gel smell. The smell will disappear in 2-3 days.

 

5.If you want to remove the tile, you could use a hair dryer to warm up the adhesive and pull softly starting with the corners.

Then use a cleaning product to remove the excess glue left.