TBS Caipirinha 2 (PNP)

The TBS CAIPIRINHA II - the wing that puts your piloting, pronunciation and spelling skills to the test! This wing is a gentle long range cruiser that turns into a fierce mountain diver with just a slight push on your pitch stick. The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland. A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, and a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance sloping highly enjoyable. The PNP kit from TBS is equipped with high quality equipment, including digital metal gear servos, a CP2814-1150kV Cobra motor, 50A HobbyWing ESC and Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup! Get ready for the only long range cruiser you will ever need, and the only flying wing in its weight class with such a wide performance envelope. Features: Small, lightweight, fly anywhere design. Ultimate in flight stability and endurance, made with virtually indestructible EPP/Plywood construction. Pre-cut camera, servo, battery, R/C receiver and video transmitter slots, 2x push-to-open equipment bays for R/C and FPV electronics, and pre-cut, sanded and covered ultra-lightweight elevons & pushrods This kit contains: Caiprinha 2 with all hardware accessories, 2x Digital MG Servo 6kgf/cm, 5-6V, CP2814-1050kV Cobra Motor, 50A HobbyWing Skywalker Wing ESC, Aeronaut 10x6 folding prop with prop assembly (CNC aluminum). Final assembly time around 2 hours. Specifications: 36.5in / 93cm wingspan 50oz / 1400g AUW (including GoPro Session5 and battery) 90min flying time 45mi / 75km endurance Recommended battery 4S 4500mAh - 6600mAh, 20C or more, with suggested dimensions of 48x36x150 mm, and 525g. MAX Dimension: 60x44x165mm, 550g Recommended FPV and Radio Equipment 5.8GHz: TBS Powercube FPVision or TBS UNIFY PRO V3 with TBS CORE PRO, and Crossfire Micro Rx or Diversity Rx

TBS Caipirinha 2 (PNP)

The TBS CAIPIRINHA II - the wing that puts your piloting, pronunciation and spelling skills to the test! This wing is a gentle long range cruiser that turns into a fierce mountain diver with just a slight push on your pitch stick.

The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland. A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, and a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensure that no energy goes to waste, and a very good glide slope makes thermaling or long distance sloping highly enjoyable.

The PNP kit from TBS is equipped with high quality equipment, including digital metal gear servos, a CP2814-1150kV Cobra motor, 50A HobbyWing ESC and Aeronaut CAM Carbon folding propellers. Vertical climbs, rocket-like punch outs, or highly efficient cruising are all within the design parameters of this setup!

Get ready for the only long range cruiser you will ever need, and the only flying wing in its weight class with such a wide performance envelope.

Features: Small, lightweight, fly anywhere design. Ultimate in flight stability and endurance, made with virtually indestructible EPP/Plywood construction. Pre-cut camera, servo, battery, R/C receiver and video transmitter slots, 2x push-to-open equipment bays for R/C and FPV electronics, and pre-cut, sanded and covered ultra-lightweight elevons & pushrods This kit contains: Caiprinha 2 with all hardware accessories, 2x Digital MG Servo 6kgf/cm, 5-6V, CP2814-1050kV Cobra Motor, 50A HobbyWing Skywalker Wing ESC, Aeronaut 10x6 folding prop with prop assembly (CNC aluminum). Final assembly time around 2 hours.

Specifications:
36.5in / 93cm wingspan
50oz / 1400g AUW (including GoPro Session5 and battery)
90min flying time
45mi / 75km endurance

Recommended battery 4S 4500mAh - 6600mAh, 20C or more, with suggested dimensions of 48x36x150 mm, and 525g. MAX Dimension: 60x44x165mm, 550g Recommended FPV and Radio Equipment 5.8GHz: TBS Powercube FPVision or TBS UNIFY PRO V3 with TBS CORE PRO, and Crossfire Micro Rx or Diversity Rx