Product Description
Select Variant From Drop-Down Menu And "Add To Cart"
WHITE LED with WHITE switch covers
For SPST Switches [On-Off, (On)-Off] - Lower LED is illuminated for the "Dash Light" when powered, Top LED illuminates when switched "ON"
- Up for On, Down for Off. Brackets () indicate momentary function. Momentary function will auto-return to Down/Off.
For DPDT 3 Way Switches [On-Off-On, (On)-Off-(On), (On)-Off-On] - Lower LED and Top LED illuminate when switched "ON" respectively (up/down)
- Up for On, Down for On, Centre for Off. Brackets () indicate momentary function. Momentary function will auto-return to Centre/Off.
All Switches are ON-OFF SPST, except the following: |"(ON)" indicates Momentary ON Function|
Up/Down Arrows ON-OFF-ON 3 WAY - ON-OFF-ON NON-MOMENTARY
Up/Down Arrows (ON)-OFF-(ON) 3 WAY - (ON)-OFF-(ON) MOMENTARY
Anchor Up/Anchor Down - (ON)-OFF-(ON) MOMENTARY
Aux/Main Battery - ON-OFF-ON NON-MOMENTARY
Battery Link (ON)-OFF Momentary - (ON)-OFF MOMENTARY
Blank (ON)-OFF Momentary - (ON)-OFF MOMENTARY
Blank ON-OFF-ON 3 WAY - ON-OFF-ON NON-MOMENTARY
Blank (ON)-OFF-(ON) 3 Way - (ON)-OFF-(ON) MOMENTARY
Blank (ON)-OFF-ON - (ON)-OFF-ON MOMENTARY UP/NON MOMENTARY DOWN
Drive Tilt - (ON)-OFF-(ON) MOMENTARY
Engine Start - (ON)-OFF MOMENTARY
Glow Plugs (ON)-OFF Momentary - (ON)-OFF MOMENTARY
High Beam/Low Beam - ON-OFF-ON NON-MOMENTARY
Horn - (ON)-OFF MOMENTARY
Interior Light ON-OFF-ON 3 Way - ON-OFF-ON NON-MOMENTARY
Nav/Anchor Light ON-OFF-ON 3 Way - ON-OFF-ON NON-MOMENTARY
Open/Close (ON)-OFF-(ON) - (ON)-OFF-(ON) MOMENTARY
Reverse Lights ON-OFF-ON 3 WAY - ON-OFF-ON NON-MOMENTARY
Washer (Momentary) - (ON)-OFF MOMENTARY
Winch (In) Momentary - (ON)-OFF MOMENTARY
Winch (Out) Momentary - (ON)-OFF MOMENTARY
Winch In/Out - (ON)-OFF-(ON) MOMENTARY
Simple and Firm Clip-In Fitment
Rubber Gasket Seal For Mounting
Item Specifications
Cut Out Required for Switch - 21.5mm (W) x 37.5mm (H)
Switch Face Size - 24.5mm (W) x 49.5mm (H)
Voltage: 12v-24v
Maximum Rating: 10 Amps for 24V - 20 Amps for 12V
IP66
Fits a massive range of Vehicle/Boat/4x4 applications!
Wiring
5 Pin Switches (Terminals Labelled):
#2 - Incoming power from source
#3 - Outgoing (to relay, equipment or accessory - lights winch etc)
#8 - Upper main 'On' light Negative (-)
#7 - Lower "Dash" light Negative (-)
#6 - Lower "Dash" Light Positive (+)
7 Pin Switches (Terminals Labelled):
#7 - Ground/Negative (-)
#1 #4 - Outgoing To Relay/Equipment/Accessory (+)
#2 #5 - 12v in from Battery (+)
#3 #6 - Outgoing To Relay/Equipment/Accessory (+)