3 Ply Black/White/Black Pickguard for 1965-1968 Gibson EB-0 & EB-3 Basses. Please compare the depth of the pickup cutout on this to what you need, around '69 the pickup got wider and slimmer, the pickguard changed accordingly; in the early 70's the pickup got a plastic pickup ring on it and the cutaway became substantially deeper still. As always, overlapping of parts occurs, Gibson didn't stop using one variation on Dec. 31st, so you may find one of this variation on a '69, or you may find the later variation on an earlier model. So it's important to use whatever measurements we have may have provided to verify this is the variation you need.
We have provided a photo with the pickup cutout measurements, please verify your fit.
Template was made from an unshrunken 1967 EB-0 pickguard. We have not included the thumb rest holes or the lower hand rest mounting hole as most individuals remove those-and if someone wants those they can easily add them. Please look at the photos closely and ask any questions you may have before purchasing. Gibson did a lot of funny stuff with their pickguards so sometimes there can be discrepancies with screw holes and whatnot, so we can't absolutely guarantee a fit with anything, but we can certainly say we're your best bet.
All GaryG's and WD products are returnable unless the protective plastic or decals have been removed or monkeyed with.
And as always, the disclaimer:
Fitting pickguards is not an exact science, if you're not willing to
face the fact that once in a while a little shaving and a little screw
hole misalignment sometimes happens, don't buy this, ..INSTEAD send in a
tracing of OR your actual guard and we can have an EXACT MATCH made for
you. New templates are $25 and take an extra two weeks on average.
-Gary