LAUNCH Creader Elite For Mercedes Benz is a professional automotive diagnostic tool for For Mercedes Benz,Maybach.It is equipped with launch x431 chip,does not only include basic functions, but also is capable of OE-LEVEL functions,ecu offline coding,adaptation,modification.this For Benz car scan tool provides powerful full system diagnosis, full special functions and OBDII module support.it is the most cost-effective professional codes reader for For Benz owners.
Upgraded hardware:All in one auto diagnostic and maintenance solution.improve your work efficiency.

ECU Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.
To improve car performance and enhance your experience as a driver or owner, you can change or add the functions by changing or adding certain modules that haven’t already in your vehicle, such as adding a satellite navigation system, courtesy lamps, car phone, parking sensors, atmosphere lights, etc.
After making repairs or replacements, you can use this bi-directional diagnostic scanner to re-flash the vehicle control modules, clear the original memories stored in ECU, and write the adaptive data into specific components to get your vehicle back on the right track.
1. Retrofit/Matching/Calibration/Personalization
2. Unlock the hidden features.
3. Component Adaptation
4. Reprogram adaptive data for vehicle control modules after repairs or replacements.
Intelligent All Systems Diagnostics for your Mercedes:
LAUNCH CRE For Benz automotive diagnostic tool can scan all modules like ECM(engine), TCM(Transmission), ABS, SRS(Airbag), Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset), Radio, EPB and so on to perform OE level diagnostics to read and clear codes, view live data stream, perform active tests, and retrieve ECU information, allows you to get a faster and more accurate test result on all electronic systems.
Active Test / Bidirectional Control:
Learning
Adaptation
Calibrattion
31+ Maintenance Functions:
31+ commonly used functions to meet the needs of daily maintenance diagnostic and reset,such as ABS Bleeding,NOx Sensor Reset,EGR Adaption,Oil Lamp Reset,Adblue Reset,DPF Regeneration,TPMS Reset,Sunroof Reset,IMMO Reset,SAS Reset,Electronic Throttle Sensor Reset, Injector Coding,Seat Calibration,Stop/Start Reset,Transport Mode,etc.
1.Oil Lamp Reset Service:perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Reset:Help replace and reset the brake pad. 3.BAT battery service(BMS):Clear the fault information of low battery and make it match again
4.DPF service 5. SAS Steering Angel Sensor Reset:Reset the steering angle to zero to keep the car running straight.
6.IMMO Key Programming(Anti-theft Matching): Disable any lost keys and add new keys. **ONLY for cars with easy IMMO system.
7. ABS Bleeding: Help exhaust the air.8. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.
9. TPMS service: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
10. Throttle Adaptation: Initialize the throttle actuators to the default state. 11. AFS Headlamp Reset: Initialize the adaptive headlamp system.
12. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
13. Suspension Reset:Adjust the vehicle body height sensor for level calibration.14. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.15. Gear Learning: Monitors certain camshaft position sensors signals.16.Tire Reset:Set the size parameters of the modified or replaced tire. 17.A/F Reset:Set or learn Air/Fuel ratio parameters.18.Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.19.Coolant Bleeding:Activate the electronic water pump
20.Language Change:Change vehicle system language.21.Nox Sensor Reset:Reset catalytic converter learned value stored in ECU. 22.Stop/Start Reset:Set up the automatic start-stop function in ECU23.Seat Calibration:Calibrate the memory in replaced or repaired seats.
24.Transport Mode:Deactivate the transport mode.25.Windows Calibration:Perform door window matching to recover ECU initial memory.
26.AC System Relearn/Initialization27.High Voltage Battery Diadnosis.28.GPF regeneration.29.Reset Fuel Alcohol Level.30.Reset Fuel Trim. 31.VGT Reset,32.Bsi Solenoid Test.33.Clutch System Learn.34.Cruise Control Radar Alignment.35.Electronic Accelerator (ETB) Check.36.Event Data Recorder Unlock37.Fuel Injector Pilot Correction Learn.38.G Sensor Calibration.39.Inclination Sensor Calibration.40.Mass Fuel Observed Reset.41.Neutral Gear Position Learn.42.Power Liftgate Initialization.43.Resume Transmission Adaptive Learning.44.Valve Calibration.45.Rmode Rebalance,etc,.(all functions are depending on the specific car models, not for all cars)
(Note: Available maintenance functions vary depending on the make, year, and model.These functions supported by the model are free and do not need to be purchased separately in the Mall)
incorporates Smart AutoVIN technology for quick and accurate vehicle identification without having to manually select vehicle parameters. this technology is ideally suited for life around busy garages or on the road with mobile technicians
After activating your device, you get 12 months of free diagnostic Apps and software. (The current version of the diagnostic software can still be used for free even after the free useful period expires. However, if you want to get the latest version, you need to renew the subscription. (After 12 months, The cost of renewal is $19.95/year.)

4 in 1 Live Data Stream:
Health Report Share & Print
Diagnostic History:
Diagnostic Report:
Diagnostic Feedback:
Supported 11 Languages:
1.Read Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Clear Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitor
3.Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data
4.I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
8.On-Board Monitor Test:Retrieves and displays test results for emission-related Powertrain components and systems.
9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

1. SAE J1850 PWM (41.6 Kbaud)
2. SAE J1850 VPW (10.4 Kbaud)
3. ISO 9141-2 (5 baud init, 10.4 Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Technical Detailed:
• Screen Size:4" Touch Screen
• Resolution:480*800 pixels
• CPU: 4-core 1.3GHz processor
• RAM: 1GB
• ROM: 16GB
• WiFi: 802.11b/g/n 2.4GHz
• USB: TYPE-C
• OBD II Input voltage range: 9~18V
• Power up via: DC 5V data cable or Diagnostic cable through connection to vehicle's DLC
• Working Temperature: -10℃ to 45℃ (14℉ to 113 ℉)
• Storage Temperature: -20℃ to 70℃ (-4℉ to 158 ℉)
Packing List:
1. LAUNCH Creader Elite Special Car Scanner
2. Data Cable
3. User Manual
4. Quick Start Guide

