Product Information

ACL Race Series STD Performance Conrod bearing set fits Nissan TD42T TD42Ti Patrol GU Y61

Item Specifics
SKU: 6B2966H-STD
Price: $140.04
Returns: 30 Days
Ships From: Melbourne

Description

ACL Race Series Performance Conrod bearing set fits Nissan 4.2L TD42T TD42Ti 6 Cyl OHV Patrol GU Y61 Diesel

ACL Race Series Performance Conrod bearing set
Over Size: STD

Notes

Material Race Series (Tri-Metal)
*
Position All
Std Shaft Diam 2.2407"/2.2412" (56.913mm/56.926mm)
Oil Clearance TBA
Maximum Wall 0.0594" (1.510mm)
Housing Bore 2.3617"/2.3622" (59.987mm/60.000mm)
Max Length 1.0280" (26.100mm)

Variations for this Engine

These are the different Variations for the Ford TD42 OHV 4.2L 6 Cyl Diesel Engine. Please check carefully you have selected the right part for your vehicle.

Taiho (R096H 0.25) Set of 6 +010 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $59.81
Taiho (R096H 0.50) Set of 6 +020 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $59.81
Taiho (R096H 0.75) Set of 6 +030 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $61.36
Taiho (R096H 1.00) Set of 6 +040 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $61.36
Taiho (R096H) Set of 6 STD Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $49.80

Suitable For

Ford
Maverick TD42 4.2L OHV 6 Cyl
Maverick DA TD42 4.2L OHV 6 Cyl
Nissan
Patrol GQ TD42 4.2L OHV 6 Cyl
Patrol GU Y61 TD42 4.2L OHV 6 Cyl
Patrol GU Y61 TD42T TD42Ti 4.2L OHV 6 Cyl
Patrol Y60 TD42 4.2L OHV 6 Cyl

Other Parts for this Engine

These are the different parts available for the Ford TD42 OHV 4.2L 6 Cyl Diesel Engine

Chassis and Driveline
Mackay A2520 Engine Mount Bush Engine mount left hand and right hand side
(2 required)
Suits models with manual transmission
AU $38.90
Mackay A5288 Engine Mount Bush Engine mount rear of engine left hand and right hand side
(2 required)
Suits models with manual transmission
AU $41.69
Cogged V-Belts
Conrod Bearings
Taiho (R096H 0.25) Set of 6 +010 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $59.81
Taiho (R096H 0.50) Set of 6 +020 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $59.81
Taiho (R096H 0.75) Set of 6 +030 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $61.36
Taiho (R096H 1.00) Set of 6 +040 Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $61.36
Taiho (R096H) Set of 6 STD Conrod Bearings Set STD 010 020
Shaft 56.910/56.940mm 2.2406/2.2417¨
Tunnel 59.987/60.000mm 2.3617/2.3622¨
AU $49.80
Cooling
Tridon Thermostat Opening Temp: 77°C Flange Dia: 54mm - TT233-170 Thermostat
Suits Maverick (excludung 10/1991-5/93 models)
AU $25.26
Tridon Thermostat Opening Temp: 77°C Flange Dia: 54mm Foot Dia: - - TT241-170 Thermostat
Suits Maverick 10/1991-5/93 only
AU $22.58
Cylinder Heads
Nason 959976 Cylinder head bare Bare Head AU $949.94
Nason 959976-A Cylinder head - assembled Assembled Head AU $1,787.13
Exhaust Gaskets
Fan Clutches
Filters
K&N E-3346 Air Filter Air filter (reusable) AU $112.44
K&N HP-3001 Oil Filter Performance oil filter
Height 145mm
AU $32.86
K&N PS-3001 Oil Filter Oil filter
Height 145mm
AU $22.08
Full Gasket Sets
Durapro (GSF2009SSND) Stainless Steel Full Gasket Set Does not include head gasket AU $320.67
Harmonic Balancers
Head Bolts and Studs
Head Gaskets
Durapro (GSS2009SSD) Graded Head Gasket 1.15mm thick (piston protrusion up to 0.118mm) AU $145.06
Durapro (GSS2010SSD) Graded Head Gasket 1.20mm thick (piston protrusion between 0.118-0.168mm) AU $145.06
Durapro (GSS2011SSD) Graded Head Gasket 1.25mm thick (piston protrusion greater than 0.168mm) AU $137.19
Endurotec (GSS2011SSE) Graded Head Gasket 1.25mm thick (piston protrusion greater than 0.168mm) AU $140.95
Permaseal S2009SS Head gasket Grade 1 1.15mm Thick AU $162.35
Permaseal S2011SS Head gasket Grade 3 1.25mm Thick AU $155.60
Permaseal S2117SS-3 Head gasket S2117SS-3 Grade 3 1.25mm AU $173.16
Inlet Manifold Gasket
Lifters
12 x Nason HT6040 Lifter Includes one 3mm oil hole AU $334.64
Nason HT6040 Lifter Includes one 3mm oil hole AU $38.43
Nason HT6040 Lifter Includes one 3mm oil hole AU $38.43
Nason HT6040 Lifter Includes one 3mm oil hole AU $38.43
Main Bearings
NDC (MS-1195GP 0.75m) +030 Set of 7 Main Bearings STD 010 020 030
Shaft 70.900/70.925mm 2.7913/2.7923¨
Tunnel 74.981/75.000mm 2.9520/2.9528¨
AU $68.69
Taiho (M096H 0.25) Set of 7 +010 Main Bearings Set STD 010 020 030
Shaft 70.900/70.925mm 2.7913/2.7923¨
Tunnel 74.981/75.000mm 2.9520/2.9528¨
AU $79.00
Taiho (M096H 0.50) Set of 7 +020 Main Bearings Set STD 010 020 030
Shaft 70.900/70.925mm 2.7913/2.7923¨
Tunnel 74.981/75.000mm 2.9520/2.9528¨
AU $79.00
Taiho (M096H 0.75) Set of 7 +030 Main Bearings Set STD 010 020 030
Shaft 70.900/70.925mm 2.7913/2.7923¨
Tunnel 74.981/75.000mm 2.9520/2.9528¨
AU $44.39
Taiho (M096H 1.00) Set of 7 +040 Main Bearings Set STD 010 020 030
Shaft 70.900/70.925mm 2.7913/2.7923¨
Tunnel 74.981/75.000mm 2.9520/2.9528¨
AU $44.39
Taiho (M096H) Set of 7 STD Main Bearings Set STD 010 020 030
Shaft 70.900/70.925mm 2.7913/2.7923¨
Tunnel 74.981/75.000mm 2.9520/2.9528¨
AU $62.82
Misc Gaskets
Permaseal WO138 Thermostat housing gasket Thermostat Housing To Timing Cover. AU $17.21
Permaseal WO139 Thermostat housing gasket Thermostat Housing To Head. AU $15.22
Miscellaneous
12 x Nason VK1009 Valve collet Suits 8mm Stem, 1 Round Bead AU $37.90
12 x Nason VK1009 Valve collet Suits 8mm Stem, 1 Round Bead AU $37.90
Nason VK1009 Valve collet Suits 8mm Stem, 1 Round Bead AU $37.90
Piston and Rings
Nason STD PKNTD42L-STD Pistons set 30mm Gudgeon pin AU $704.40
Nason STD PKNTD42-STD Pistons set 28mm Gudgeon pin AU $706.75
Piston Cylinder Sleeves
6 x Nason NTD42-SF Sleeve Semi-Finished AU $383.08
Nason NTD42-SF Sleeve Semi-Finished AU $73.43
Nason NTD42-SF Sleeve Semi-Finished AU $73.43
Nason NTD42-SF Sleeve Semi-Finished AU $73.43
Piston Rings Cast
Nason STD RSNTD42-3.0-STD Piston Ring set 3 Ring: 2.5mm/2mm/3mm AU $407.50
Nason STD RSNTD42-4.0-STD Piston Ring set 3 Ring: 2.5mm/2mm/4mm AU $323.90
Piston Rings Chrome
TP (34098-STD) STD Piston Rings Chrome STD
2.5mm/2mm/4mm
AU $245.38
Pistons
Hypatec (PNITD42A60001H) STD Pistons Set Of 6 STD (set of 6) Rings not included
Use RS4951 piston rings
(28mm pin) (up to 8/1995)
Includes alfin inserts on 1st compression rings)
Compression height 50.3mm -1.8mm
AU $599.03
Precombustion Chambers
6 x Nason PCNTD42 Pre-combustion chamber Suits TD42 2/88-7/95 AU $333.58
6 x Nason PCNTD42LATE Pre-combustion chamber Suits TD42 8/95-97 AU $205.41
Nason PCNTD42 Pre-combustion chamber Suits TD42 2/88-7/95 AU $333.58
Nason PCNTD42LATE Pre-combustion chamber Suits TD42 8/95-97 AU $205.41
Rear Main Seals
Durapro (GSRMS026D) Crankshaft Seal Rear Lip type
ID 86mm x OD 100mm x depth 10mm
AU $55.78
Permaseal RMS026 Crankshaft seal rear See notes for models
Size 86x100x10
AU $60.69
Small End Bushes
Sump Gasket Sets
Thrust Washers
Timing Cover Seals
Durapro (GSNJ831D) Crankshaft Seal Front ID 58mm x OD 80mm x depth 12mm AU $40.56
Valve Cover Gaskets
Valve Guides
JCMC (VGND-25-Z) Valve Guide Cast iron
OD 12mm x ID 8mm x length 47.2mm
AU $20.08
Valve Regrind Gasket Set (VRS)
Crossfire XV2009LS VRS Gasket set Includes Head Gasket AU $276.85
Durapro (GSV2009SSND) VRS Gasket Set Does not include head gasket AU $216.87
Permaseal V2009SSN VRS Gasket set Does not include head gasket AU $165.90
Valve Spring Retainers
Valve Springs
Valve Stem Seals
Valves-Exhaust
Valves-Inlet
JCMC (EVNI-45-I) Inlet/Intake Valve Head 43.4mm x length 117mm x stem 8mm AU $41.24
Water Pumps

Web Store Pty Ltd is a Melbourne based warehouse with thousands of the latest products at great prices. We hand select our range of Australian designed products from only the best local suppliers. We pride ourselves on our customer service and our friendly team are available to assist you through the buying process. When comparing prices know we only sell great quality items and our manufacturing passes strict quality checks before posting.

To ensure a smooth transaction, please follow the payment instructions laid out in the eBay system. If you are new to eBay and unsure how to purchase, please don't hesitate to get in contact with us as our Customer Service team will be happy to assist.

The simplest way to facilitate payment is via Mastercard, Visa, or Paypal via the Checkout process.

Please contact us if yous wish to pay via direct deposit and then we can supply our Account and BSB details.

If paying by bank deposit, please ensure you have your reference of your payment with your eBay user ID so we can identify the payment as yours. Failure to correctly reference your payment will cause a delay in our system which will ultimately delay the shipment of your order.
We check our bank accounts daily so as soon as your payment has cleared, we will start processing your order.

Our stock levels can change at any time. An order is only complete once payment has cleared. To prevent missing out, it's best to pay as soon as possible. Once a payment has cleared, 90% of products are dispatched within 1 business day, however please see our shipping page for estimated shipping times by state. Wedding Wish is not liable for any unidentified payments or delays of delivery due to failure to follow instructions during checkout.

For all payments outside of eBay, please ensure you send us the reference you used, the day and time you paid, and the amount deposited.

As always, if you have any questions, please get in contact with our Customer Service team who are more than happy to help.

We are happy to combine shipping on any orders. Individual listings with combined shipping will automatically calculate on checkout. When buying from multiple listings, please message us prior to purchase to confirm postage rates, be sure to include your postcode for accurate quoting and the items you are after. Express post is available on request for most orders, please note handing times will usually still apply.

Pre-arranged pickup is available from our warehouse in Dingley Village, Victoria. Please note that a handling time will still apply. Please call ahead or email us to ensure item is available for pickup.

POSTAGE & DISPATCH

After payment is cleared 90% of all items are dispatched within two business days, however please see below for estimated delivery times by state. Your item will be sent via courier or Australia Post depending on its size and weight.

Where goods are sent through Australia Post, the buyer may receive a knock on the door or a card in their letterbox indicating their item is available for pickup from their local post office.

A re-delivery fee will be charged to buyers for items that are undeliverable and/or returned due to incorrect delivery address or unsuccessful delivery.

Buyers have the full responsibility to provide us with the correct delivery address and mobile phone number on the checkout page before payment. Any changes to address after checkout will not be considered as valid.

Our staff work tirelessly to ensure customer satisfaction however we understand that on occasion issues do arise. If you have a problem with your purchase please contact us PRIOR to leaving feedback and we will do our best to rectify the situation.

Claims entered directly via this method will be given priority.

The fastest and best way to contact us is through the eBay messaging system. If you contact us out of eBay we may not see your message and our support team will be much slower in dealing with your issue. Thank you for your business!

Copyright (C) 2018 Web Store Pty Ltd. All Rights Reserved