MCSADVENTURES Plug and Play Turn Signal Kit with Vertical Horn/Hazard for 14+ RZR, 18+ Ranger xp - forward facing stick-on lights

MCSADVENTURES Rocker turn signal & horn kit

Fits 2014+ Polaris RZR 900s, 1000s, 14-23 RZR xp1000, 16-21 RZR xp Turbo, 18-21 RZR Turbo S, Pro XP

Fits 2018+ Ranger 1000, 1000xp (all trim levels including ride command)

Will NOT fit 2018 Ranger 1000 crew

Check tail light plugs to verify fitment

Rocker switches snap into .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Custom rear T harness plugs into the left and right tail light harness

Extended length harness fits 2 and 4 seat models

Stick on LED strip lights for front turn signals

Includes Pulse bar harness for newer 2019+ machines.

NOTE:  For 18+  Polaris Ranger 1000 models, this switch will NOT fit if your switch hole is already punched out for OEM sized switches as this switch fits into a slightly smaller cutout than the OEM switches. However, these will fit into any cutout that you cut out manually. For all 18+ Ranger 1000 models, we highly suggest using our Ranger specific kit  Part # 63281 which utilizes OEM sized rocker switches.

Looking for a true plug and play way to add turn signals to your  2014+ RZR or 2018+ Ranger 1000  that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.

Kit is designed around a main control module front harness and a custom rear tail light T harness.

Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fubling with qd's or splicing wires.

Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

Hazard function works even with key off for most Ranger and RZR units.  

Includes optional instrument cluster integration for machines with the instrument cluster shown.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals.  We also supply a license plate light pigtail that can activate your license plate light with key on. This custom harness feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the turn signal control module.

Aluminum body LED sequential strip light mounts to virtually any flat surface. LED strip is 6 inches in length. 1/4" height and 1/2" in depth. Utilizing the included double sided peel and stick adhesive foam tape they will suite a wide variety of installations. For RZR machines, they fit perfect on the upper inner portion of the headlight. On Ranger models they usually fit best on the front fascia/bumper area or laid underneath the headlights on the plastic fascia.

A combination hazard / horn rocker switch saves space in your dash while maintaining all the bells and whistles.

A loud throaty automotive style horn is included. This is no beep-beep toy sounding ATV or Motorcycle horn that you find on many other kits on the market folks! It is a legit auto/truck horn with a deep tone that will put many car horns to shame!

All plug and play. Everything plugs together.

Only 3 connections to the vehicle:       12v+ (battery)       12v+ keyed (ignition)      12v- (ground)

A pulse power harness is included for machines with the pulse power bar.

Total install time:  approx 1 hour