Pulse oximeters give an estimated oxygen saturation level value. Several research studies and an FDA 2021 safety communication have found that certain physical traits, including but not limited to darker skin pigmentation and melanin, may make the oxygen level estimated value appear higher than it actually is. Users are strongly recommended to establish a baseline value when healthy and at rest. It is recommended that users consult a licensed healthcare provider or professional on how to interpret user readings based on physical traits or characteristics.Finger Tip Blood Oxygen Meter SPO2 PR Pulse Monitor LED Display
Brief introduction
1.Introduction
CMS50M Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation.
CMS50M Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc.
2.Features
1) Can measure SpO2 and Pulse Rate accurately
2) SpO2 and Pulse Rate display,bar graph display
3) Battery voltage low indication
4) Shut off automatically when no signal
3.Performance
SpO2 measurement range: 0%~100%
Accuracy: 70%~100%: ±2%
0%~69%: unspecified
PR measurement range: 30bpm~250bpm
Accuracy: ±2bpm or ±2%, whichever is greater.
Resolution:
SpO2: 1%
PR: 1bpm
Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2%, whichever is greater.
Resistance to surrounding light: The deviation between the value measured in the condition
of man-made light or indoor natural light and that of darkroom is less than ±1%.
Working current: ≤25mA
Power supply: two “AAA” batteries
Safety classification: type BF applied part
4.Physical characteristic
Dimension: 57mm(L) × 34mm(W) × 31mm(H)
1.Introduction
CMS50M Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation.
CMS50M Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc.
2.Features
1) Can measure SpO2 and Pulse Rate accurately
2) SpO2 and Pulse Rate display,bar graph display
3) Battery voltage low indication
4) Shut off automatically when no signal
3.Performance
SpO2 measurement range: 0%~100%
Accuracy: 70%~100%: ±2%
0%~69%: unspecified
PR measurement range: 30bpm~250bpm
Accuracy: ±2bpm or ±2%, whichever is greater.
Resolution:
SpO2: 1%
PR: 1bpm
Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2%, whichever is greater.
Resistance to surrounding light: The deviation between the value measured in the condition
of man-made light or indoor natural light and that of darkroom is less than ±1%.
Working current: ≤25mA
Power supply: two “AAA” batteries
Safety classification: type BF applied part
4.Physical characteristic
Dimension: 57mm(L) × 34mm(W) × 31mm(H)
Buy Safe Product!!
■The following FDA Disclaimer is required for all eBay listing in
Healthcare category and is included for REFERENCE:
■The sale of this item may be subject to regulation by the U.S.
Food and Drug Administration and state and local regulatory agencies.
■If the item is subject to FDA regulation,We will verify your status
as an authorized purchaser of this item before shipping of the item.
■The model is registered on the Australian Register of Therapeutic
Goods (ARTG) with the code 197923, and certified by FDA
510K Approved of America and CE,TUV of Europe
About Us
Contec Medical Systems Co., Ltd. (hereinafter referred to as CONTEC) focusing on research, manufacture and distribution of medical instruments, was founded in 1996 as a high-tech company. CONTEC locates in Economic & Technical Development Zone in Qinhuangdao covered an area of 125 acres and building area of over 100000 square meter, which is one of the largest bases for R & D and production of medical devices in China.
Contec hopes to cooperate with international companies to supply more innovative design and advanced
technology products
We sincerely welcome you to become one of our global partners.
We are looking forward to establishing a successful business relationship with you.
Contact Us
What'sApp: +86 13780478044