VAN DEN HUL D-501 HYBRID TAC-RCA
- connettore TAC (Tone Arm Connector) DIN a 5 pin a un capo e 2x RCA all'altro capo;
- conduttore centrale da 0,15 mm quadrati in purissimo rame OFC placcato in argento ad elevata purezza e densità;
- shermo ibrido in purissimo rame OFC placcato in argento ad elevata purezza e densità più strato di Linear Structured Carbon®;
- resistenza tipica a 20 gradi: core 11,3 Ohm/100 m, screen 2,3 Ohm/100 m;
- capacità 75 pF/m;
- isolante interno in schiuma di polyethylene;
- rivestimento esterno Hulliflex, diametro 4,5 mm;
- lunghezza 1 metro;
- ordinabile su richiesta con connettore TAC dritto anziché angolare.
This matte black Hulliflex ® jacketed balanced cable was designed: very flexible and with extremely good electrical qualities. The D – 501 Hybrid is a cable with a very high shielding factor. Not expensive and with very high performance quality, making it excellent suitable as phono interconnect.
The D – 501 Hybrid features:
The 2 signal lines are each made of 19 x 0.1 mm very high grade OFC wires with the highest density of very pure silver coating.
As an extra layer around the metal group, we use a Linear Structured Carbon ® (LSC) saturated coating.
The signal line insulation with white and yellow colours is made of cell-PE, so the stripping can even be done with your fingernails to prevent wire damage on the silver coated copper strands commonly caused by mechanical stripping.
The resistance per signal lead is: 11.3 Ohm/100 meter.
The capacitance between the 2 signal leads is: 75 pF/meter.
Very flexible specially treated artificial fibres are used as a filler to prevent any harm caused by external humidity or chemicals.
The shielding consists of 96 x 0.10 mm. wires of a high-grade Matched Crystal (MC) OFC with a dense and very pure silver coating and a LSC saturated helical tape.
The resistance of the shielding is: 2.3 Ohm/100 meter.
The very flexible black outer jacket is made of migration-free Hulliflex ® to prevent any chemical deterioration over a long period.
The type printing repeats every 25 cm. (10″) to make cutting of specified lengths easy.
The external cable diameter is: 4.5 mm.
Features
ConductorThe 2 signal lines are each made of 19 x 0.1 mm very high grade OFC wires with the highest density of very pure silver coating.
JacketA durable and rugged matte black Hulliflex ® jacket for optimal protection and lifespan.
ShieldingDouble shielded, one layer LSC saturated, for enhanced protection against unwanted noise and interference from the outside world’s radio frequency and other electromagnetic disturbances.
PurposeThe D - 501 Hybrid is an excellent choice as phono interconnect to connect high-end turntables to phono amplifiers, or as a microphone cable or in the mixing console industry.
SPECIFICS
Type of cable
Analogue interconnect – phono
Available versions
RCA, TAC (angled or straight), XLR
Jacket color
Matte black
Product range
Mid-range
Conductor material
Silver plated OFC
Conductor diameter
0.44 mm
Shielding
Double shielded, One LSC saturated
Cable diameter
4.5 mm
Resistance
0,023 Ω/m (screen), 0,113 Ω/m (conductor)
Capacitance
75 pF/m