Simpson Strong-Tie STB2-758126SS 3/4 x 8-1/2 316SS StrongBolt2 Wedge Anchor 10ct
Simpson Strong-Tie STB2-758126SS 3/4 x 8-1/2 316SS StrongBolt2 Wedge Anchor 10ct
A
wedge-type expansion anchor designed for optimal performance in cracked
and uncracked concrete as well as uncracked masonry. The Strong-Bolt 2
is available in carbon steel, Type 304 and Type 316 stainless steel.
Key Features - Code listed under IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3037
- Code listed under IBC/IRC for masonry per IAPMO UES ER-240
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3 1/4", and lightweight concrete-over-metal deck thickness of 2 1/2" and 3 1/4"
- Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
- Tested per ACI355.2 and AC193
Installation - Drill
a hole in the base material using a carbide drill bit the same diameter
as the nominal diameter of the anchor to be installed. Drill the hole
to the specified minimum hole depth, and blow it clean using compressed
air. (Overhead installations need not be blown clean.) Alternatively,
drill the hole deep enough to accommodate embedment depth and dust from
drilling.
- Assemble the anchor with nut and washer so the
top of the nut is flush with the top of the anchor. Place the anchor in
the fixture, and drive it into the hole until the washer and nut are
tight against the fixture.
- Tighten to the required installation torque.
| Strong-Bolt 2 Diameter (in.) | Drill Bit Size (in.) | Min. Fixture Hole (in.) | Wrench Size (in.) | Concrete Installation Torque (ft.-lbf.) Carbon Steel | Concrete Installation Torque (ft.-lbf.) Stainless Steel |
| 1/4 | 1/4 | 5/16 | 7/16 | 4 | 4 |
| 3/8 | 3/8 | 7/16 | 9/16 | 30 | 30 |
| 1/2 | 1/2 | 9/16 | 3/4 | 60 | 65 |
| 5/8 | 5/8 | 11/16 | 15/16 | 90 | 80 |
| 3/4 | 3/4 | 7/8 | 1 1/8 | 150 | 150 |
| 1 | 1 | 1 1/8 | 1 1/2 | 230 | - |
Caution - Do not use an impact wrench to set or tighten the Strong-Bolt 2 anchor
- Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor's load capacity
Specifications:| Anchor Diameter: | 3/4" |
| Anchor Length: | 8-1/2" |
| Anchor Material: | 316 Stainless Steel |
| Quantity: | 10 |
| Anchor Head Type: |
|
| UPC: | 707392582601 |