Facon 8" x 25" 110Volts DC Water Tank Heater Pad with Automatic Thermostat
Properly sized and installed Facon Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach
Specifications:
Model# CW-ST825
Pad size (Inch): 8"x25"
Foam Pad thickness: 3.0MM
Volts : 120 V DC
Power: 84 W
Electric Current: 0.7A
Lead Wire Lengh: 36''
With Automatic Thermostat Control
Model# CW-ST825
Pad size (Inch): 8"x25"
Foam Pad thickness: 3.0MM
Volts : 120 V DC
Power: 84 W
Electric Current: 0.7A
Lead Wire Lengh: 36''
With Automatic Thermostat Control
Built in thermostat is set to turn itself on at 45°F( + - 5 degrees) and turn itself off at 68°F( + - 5 degrees).
As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
Package includes:
1 piece 8"x25" RV Water Holding Tank Heater Pad
Visit our store for 12" x 18" heater pad！
User's Tips:
1.Do not Stretch the pad.
2.Apply tank heater pads to smooth and clean surfaces.
3.Identify the lowest point on the holding tank, closest to the drain.
4.Clean the surface of the holding tank with isopropyl alcohol and let dry.
5.Peel back the paper from the adhesive, and then press firmly and smoothly over the intended placement area.
6.The model CW-ST825, requires 120V AC to operate . Please ensure the connection to the proper voltage and the proper “on/off” switch is used.
7.The connection must be fused with correct amperage. The fuse connection please refer to drawing here. Please use 10A fuse for CW-ST825 Tank Heater pad.
8. Red Wire=Positive(+). Connect to RV power wire;
White Wire=Negative(-). White wire can be wired to the metal frame on your RV / Camper, or if your RV / Camper has negative wire, then you can connect this end to negative wire. Please refer to drawing here.
9.Please ensure after installation the lead wires are securely located and will not hang below the surface of the tank.
10.If two or more heater pads are to be used they must be connected parallel.
11.The model CW-ST825 works efficiently up to 40 gallon holding tanks.
1.Do not Stretch the pad.
2.Apply tank heater pads to smooth and clean surfaces.
3.Identify the lowest point on the holding tank, closest to the drain.
4.Clean the surface of the holding tank with isopropyl alcohol and let dry.
5.Peel back the paper from the adhesive, and then press firmly and smoothly over the intended placement area.
6.The model CW-ST825, requires 120V AC to operate . Please ensure the connection to the proper voltage and the proper “on/off” switch is used.
7.The connection must be fused with correct amperage. The fuse connection please refer to drawing here. Please use 10A fuse for CW-ST825 Tank Heater pad.
8. Red Wire=Positive(+). Connect to RV power wire;
White Wire=Negative(-). White wire can be wired to the metal frame on your RV / Camper, or if your RV / Camper has negative wire, then you can connect this end to negative wire. Please refer to drawing here.
9.Please ensure after installation the lead wires are securely located and will not hang below the surface of the tank.
10.If two or more heater pads are to be used they must be connected parallel.
11.The model CW-ST825 works efficiently up to 40 gallon holding tanks.
 |
- Please leave your phone number if possible, for a better contact with delivery companies.
- Orders are shipped within 1 business days after payment has been completed.
- Standard Shipping via USPS/FedEx 2-6 working days
- Items will be dispatched within 1 business day after cleared payment.(Sat. & Sun. excluded.)
- Returns are accepted 30 days after delivery.
- Returned merchandise must be unused and undamaged. The buyer is responsible for return shipping and packaging fees.
- If packages are wrongly delivered or dead on arrival, please take pictures for a proof of return or exchange.
- Ways Pride LLC is a company has been focused on RV industry for 15 years. We have our own manufacturing facility produce LED lightings. Our sales center and warehouse located in Newark De 19713. Feel free to contact us via eBay message on Mon to Fri.
