• Specifications
    • Condition: New
    • Color:Black
    • Warranty:10 Year
     
  • Package Include
    • 1x Part# Front Upper Left Control Arm and Ball Joint Assembly - K9814
    • 1x Part# Front Upper Right Control Arm and Ball Joint Assembly - K9813
    • 2x Part# Front Lower Ball Joints - K9385
    • 2x Part# Front Inner Tie Rod Ends - EV217
    • 1x Part# Front Left Outer Tie Rod End - ES3332R
    • 1x Part# Front Right Outer Tie Rod End - ES3331R
    • 2x Part# Front Sway Bar Links - K90123
     
  • Fits the following vehicles

    • Suspension 10x Control Arm Sway Bars Link Ball Joint For 1988-91 Honda Civic CRX

    Specifications

    • Condition: New
    • Color:Black
    • Warranty:10 Year

     

    Package Include

    • 1x Part# Front Upper Left Control Arm and Ball Joint Assembly - K9814
    • 1x Part# Front Upper Right Control Arm and Ball Joint Assembly - K9813
    • 2x Part# Front Lower Ball Joints - K9385
    • 2x Part# Front Inner Tie Rod Ends - EV217
    • 1x Part# Front Left Outer Tie Rod End - ES3332R
    • 1x Part# Front Right Outer Tie Rod End - ES3331R
    • 2x Part# Front Sway Bar Links - K90123

     

    Fits the following vehicles

    • Honda CRX Base 1.5L 1989-1991
    • Honda CRX DX 1.5L 1988
    • Honda CRX HF 1.5L 1988-1991
    • Honda CRX Si 1.6L 1988-1991
    • Honda Civic Base 1.5L 1988-1990
    • Honda Civic DX 1.5L 1988-1991
    • Honda Civic EX 1.6L 1990-1991
    • Honda Civic LX 1.5L 1988-1991
    • Honda Civic RT 1.6L 1988-1991
    • Honda Civic Wagovan 1.5L 1988-1989

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.

     

    Replacement Guideline

    Ball joints

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

    Control Arms

    1. lift the vehicle using a car lift, ideally a wheel-free four-post car lift
    2. loosen and remove the corresponding stabiliser fixing screws.
    3. Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller).
    4. Remove the old control arm
    5. Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner
    6. Fit the new control arm with the supplied accessories and attach new fixing screws and nuts.
    7. Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm.
    8. lower the vehicle until the suspension is compressed
    9. Tighten the fixing screws with the torque stipulated by the vehicle manufacturer.
    10. Lower the vehicle all the way.
    11. Measure the chassis and adjust if necessary.
    12. Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm.
    13. To conclude, test-drive the vehicle.

    Sway bars

    1. To hold the stud on the end of the sway bar link while adding the new lock nut. 
    2. Using the wrench, install the new lock nut, making sure to wrench it the whole way.
    3. With the sway bar link in position, put the nut on using your hand. 
    4. Wrench the nut tight to the vehicle manufacturer recommended torque values
    5. Changing wrenches as needed to fit the new sway bar link nut.

     

    Bad Control arm symptons

    • popping noise
    • steering is unstable
    • uneven tire wear

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

    Signs of sway bars breaks

    • Rattling and thumping noises on rough roads.
    • Imprecise vehicle handling.
    • Stronger inclination of the vehicle during cornering.

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

    Importance of Control Arms

    • It is a link that connects the frame of the car to the wheel hub assembly or steering knuckle.
    • It allows a driver to steer a car while also guiding the wheels up and down with the road surface.
    • They have a vital role in a vehicle's overall stability and drivability.

     

    Infiuence of a bad sway bars

    • Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers

     

     

     


    Item Specifics
    Placement on Vehicle Front, Left, Right, Upper, Lower
    Brand auspartshouse
    Manufacturer Part Number 10092739
    Number of Kit Pieces 10 pcs
    Manufacturer Warranty 10 Years
    Fitment Type Direct Replacement
    Mounting Hardware Included No
    Interchange Part Number 51450SH3023,51460SH3023,51220SF1000, 51220SH3003,53521SH3003
    Suspension Grade Standard
    Custom Bundle Yes
    Modified Item No
    Color Black
    Surface Finish Polished
    Packaging New in Box
    Type Control Arm & Ball Joint Assembly
    Adjustable Yes
    Greasable Yes
    Superseded Part Number K9813, K9814, K9385, K90123
    OE/OEM Part Number EV217, ES3331R, ES3332R
    Vintage Car Part No
    Performance Part Yes
    Universal Fitment No

    Payment
    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    Feedback

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Contact Us

    Any question or problem, please feel free to contact us via ebay message.

    Just Get It NOW
    content_src_url
    Shop Category
     Store Home
     Wheel Spacers
     Leveling Lift Kits
     3RD Brake Lights
     LED Instrument Lights
     Tire Pressure Sensors
     Fasteners
     Remote Keys
     Sun Visors
     Roof Racks
     Ballast Modules
     Rubber Seal Strips
     Throttle Body
     Thermostat Housing
     Fuel Injectors
     Coilovers
     Ignition Coils
     Wheel Hub Bearing
     Suspension Kits
     Window Regulators
     Sensors
     Mud Flaps
     Lift Supports
     Resistors
     HVAC Blower Motors
     Radiators
     Cooling Fans
     Coolant Overflow Tanks
     Engine Gaskets
     Blend Door Actuators
     Air Suspensions
     AC Condensers
     Heater Cores
     Window Switches
     Door Handles
     Shock Struts
     Windshield Wiper Motors
     A/C Compressors
     Timing Chain Kits
     Timing Belt Kits
     Turbochargers
     Radiator Supports
     Mirrors
     A/C Evaporators
     Engine Motor Mounts
     Starters
     Alternators
     Brake Calipers
     Power Steering Pumps
     Tensioners
     Brake Rotors
     Brake Pads
     Fuel Pumps
     Water Pumps
     Driveshafts
     Idle Air Control Valves
     Power Steering Rack & Pinion
     VVT Variable Valves
     Lug Nuts
     Steering Shafts
     CV Axles
     Hydraulic Lifters
     Towing Parts
     Steering U-Joint Parts
     Door Lock Actuator
     AC Compressor-d
     Spoilers & Wings
     Truck Bed Accessories
     Lawn Mower Parts
     Oil Pump
     Bumper
     Armrest Cover
     Horn
     Truck Bed Mat
     Side Steps Running Boards
     Cylinder Piston Gasket
     Bug Hood Shield
     Running Board Motor
     Bed Step
     Mass Air Flow Sensor
     Dipstick
     Headlights Assembly
     Harmonic Balancer
     Other
    Hot Item
    New List Item
    Suspension 10x Control Arm Sway Bars Link Ball Joint For 1988-91 Honda Civic CRX

    Specifications

    • Condition: New
    • Color:Black
    • Warranty:10 Year

     

    Package Include

    • 1x Part# Front Upper Left Control Arm and Ball Joint Assembly - K9814
    • 1x Part# Front Upper Right Control Arm and Ball Joint Assembly - K9813
    • 2x Part# Front Lower Ball Joints - K9385
    • 2x Part# Front Inner Tie Rod Ends - EV217
    • 1x Part# Front Left Outer Tie Rod End - ES3332R
    • 1x Part# Front Right Outer Tie Rod End - ES3331R
    • 2x Part# Front Sway Bar Links - K90123

     

    Fits the following vehicles

    • Honda CRX Base 1.5L 1989-1991
    • Honda CRX DX 1.5L 1988
    • Honda CRX HF 1.5L 1988-1991
    • Honda CRX Si 1.6L 1988-1991
    • Honda Civic Base 1.5L 1988-1990
    • Honda Civic DX 1.5L 1988-1991
    • Honda Civic EX 1.6L 1990-1991
    • Honda Civic LX 1.5L 1988-1991
    • Honda Civic RT 1.6L 1988-1991
    • Honda Civic Wagovan 1.5L 1988-1989

     

    Note

    • Please be sure you review the compatibility information.
    • If you have a question about the part please free contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution.

     

    Replacement Guideline

    Ball joints

    1. Purchase the correct replacement ball joint assembly for your vehicle.
    2. Remove the wheel and access the ball joint.
    3. Soak all the bolts with WD-40 or PB Blaster.
    4. Pull the cotter pin and loosen the large castellated nut.
    5. Pop loose the ball joint. 
    6. Remove the allen bolts and slide the control arm free. 
    7. Guide the new joint through the knuckle hole.
    8. Bolt the joint into place using the hardware included.
    9. Torque the bolts to the proper specifications.
    10. Screw in the new grease fitting and pump grease into the assembly.

    Control Arms

    1. lift the vehicle using a car lift, ideally a wheel-free four-post car lift
    2. loosen and remove the corresponding stabiliser fixing screws.
    3. Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller).
    4. Remove the old control arm
    5. Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner
    6. Fit the new control arm with the supplied accessories and attach new fixing screws and nuts.
    7. Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm.
    8. lower the vehicle until the suspension is compressed
    9. Tighten the fixing screws with the torque stipulated by the vehicle manufacturer.
    10. Lower the vehicle all the way.
    11. Measure the chassis and adjust if necessary.
    12. Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm.
    13. To conclude, test-drive the vehicle.

    Sway bars

    1. To hold the stud on the end of the sway bar link while adding the new lock nut. 
    2. Using the wrench, install the new lock nut, making sure to wrench it the whole way.
    3. With the sway bar link in position, put the nut on using your hand. 
    4. Wrench the nut tight to the vehicle manufacturer recommended torque values
    5. Changing wrenches as needed to fit the new sway bar link nut.

     

    Bad Control arm symptons

    • popping noise
    • steering is unstable
    • uneven tire wear

     

    Signs of a ball joint breaks

    • Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle
    • Steering-The steering sloppy or stiff 
    • Tires -Uneven tire wear 

    Signs of sway bars breaks

    • Rattling and thumping noises on rough roads.
    • Imprecise vehicle handling.
    • Stronger inclination of the vehicle during cornering.

     

    Infiuence of a bad joint break

    • Causing mysterious clunking noise or drifting steering
    • Affecting your steering and suspension seriously 

     

    Importance of Control Arms

    • It is a link that connects the frame of the car to the wheel hub assembly or steering knuckle.
    • It allows a driver to steer a car while also guiding the wheels up and down with the road surface.
    • They have a vital role in a vehicle's overall stability and drivability.

     

    Infiuence of a bad sway bars

    • Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers

     

     

     

    Item Specifics
    Placement on Vehicle :Front, Left, Right, Upper, Lower
    Brand :auspartshouse
    Manufacturer Part Number :10092739
    Number of Kit Pieces :10 pcs
    Manufacturer Warranty :10 Years
    Fitment Type :Direct Replacement
    Mounting Hardware Included :No
    Interchange Part Number :51450SH3023,51460SH3023,51220SF1000, 51220SH3003,53521SH3003
    Suspension Grade :Standard
    Custom Bundle :Yes
    Modified Item :No
    Color :Black
    Surface Finish :Polished
    Packaging :New in Box
    Type :Control Arm & Ball Joint Assembly
    Adjustable :Yes
    Greasable :Yes
    Superseded Part Number :K9813, K9814, K9385, K90123
    OE/OEM Part Number :EV217, ES3331R, ES3332R
    Vintage Car Part :No
    Performance Part :Yes
    Universal Fitment :No


    We use eBay's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won.
     
    To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order.
     
    Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question".
     
    Payment Options: Any payment which can be accepted by ebay.
     
    If you want to change the shipping address, please contact us by eBay messages within 12 hours.
     
    Payment must be received within 10 days as auction ended or order might be delayed.

    1. More than 90% orders processed within 24 hours of payment verification.

    2. We only ship to the address in order provided to us. Your order address will be the shipping address.

    3. The images shown is the the actual item you will get and the size are for your reference.

    4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.

    We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Any question or problem, please feel free to contact us via ebay message.


    All rights reserved.