Delivery in Progress - Thank you for your patience

Please choose from the drop-down menu material and size required.

Self Adhesive Sticker

Self-adhesive high-tack outdoor sticker printed using genuine manufacturers ink for vibrant long lasting print.

Also laminated MATT to protect against UV rays/scratching light abrasion.

Please ensure the surface is clean and dry before application.

Magnetic Sign

0.85mm Vehicle grade magnetic material with high-tack printed vinyl.

 Also laminated MATT to protect against UV rays/scratching light abrasion.

Please ensure you read the information below regarding the care and storing of your sign(s)

We recommend removing and cleaning both the surface and the back of the magnetic sign on a regular basis

Available in either self adhesive weatherproof sticker or magnetic weatherproof sign

Please choose from the drop-down menu the material you require including size

The listing is for one item, we would recommend using the "add to basket" button

if you are ordering more than one item to benefit from the bulk buy discount.

Storing Your Magnetic Sign

· When not using your magnetic sign keep it in a clean, dry place.
· Stack flat magnetic signs on a level surface.
· Avoid placing objects on top that could damage the face.
· Do not stack signs with the magnetic side facing each other.
Preparing the Surface
· Before affixing your magnetic sign to a metal surface, be sure all surface paints, clear coats, and waxes are cured (hardened).
(Approximate curing times: paint - 90 days; clear coat - 60 days; wax - 2 days.)
· Clean the metallic surface and the magnet with mild detergent.
· Wipe with a soft cloth or allow to dry.

Applying Your Magnetic Sign Do not apply your magnetic sign over car trim.

· Affix to smooth, flat, or gently curved metallic surfaces. Do not apply over car trim.
· Make sure the entire magnet is flat against the metal surface (i.e., no air pockets).
· If you place the magnet in the wrong position, completely remove the magnet from the surface and reaffix.
Do not pull the magnet across the surface, or it may stretch due to the resistance caused by the high magnetic strength.
Always remove your magnetic sign before going through a car wash.
· Avoid use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods)
or temperatures exceeding 150 degrees Fahrenheit.
· Exposure to cold weather will make the magnet more brittle so be careful when handling it.
The magnet should not be cold when removed or it may crack.
· Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles) can result in uneven
fading of the surface because the magnet-covered area is shielded from ultraviolet rays.
· Please make sure that magnets will stick to the surface you intend to use them on before placing your magnetic sign order with us.
Avoid use on non-metallic body fillers, simulated wood grain siding and repainted surfaces.
Often, magnets will not stick to aluminum, stainless steel, and fiberglass. The exterior of Saturn cars, for example,
is a plastic material in which a magnetic sign will not adhere.

Cleaning Your Magnetic Sign
· To guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications),
remove the magnet at regular intervals. Clean both the magnet and the metal surface with mild detergent; wipe with a soft cloth or allow to air-dry.
· To protect fresh clear coat, base coat, and/or vinyl surfaces on new cars and trucks, remove magnetic signs
weekly, especially in hot weather, to avoid having the magnet bond to the painted vehicle surface.