Eibach (0700.250.0325) ERS 7 inch L x 2.50 inch dia x 325 lbs Coil Over Spring
Eibach (0700.250.0325) ERS 7 inch L x 2.50 inch dia x 325 lbs Coil Over Spring
Eibach ERS 7.00 inch L x 2.50 inch dia x 325 lbs Coil Over Spring
Part Number: 0700.250.0325
Description:EIBACH COILOVER SPRING
(WSM) Web Category Description:EIBACH COILOVER SPRING
(WSM) Category Display Order:500
(WSM) Clean Prod Desc:Coilover-Spring-(Red)
A properly tuned spring system provides the muscle needed to transform the power derived from the engine of a racing car to the track through optimum adhesion. Suspension tuning is a precise balance. On one hand, the spring system should be soft enough to compensate for road irregularities assuring permanent road contact, while on the on the other hand the spring system must be firm enough to reduce the body roll, squat, and dive of the vehicle during cornering, acceleration and braking.
For optimum balance, Eibach has developed our world famous ERS double spring system. By combining more than 700 different single spring components, the suspension engineer or weekend enthusiast can create nearly unlimited combinations. Our ERS double-spring system is unsurpassed in performance and flexibility.
The ERS systems relies on a Main and Tender spring concept that provides a softer initial rate when both springs are compressed together, then delivers the desired firmer ending rate once the tender spring closes completely. The Main spring has a linear-rate characteristic and determines the final rate of the system. The Tender springs are available in a variety of linear-rate as well as progressive-rate characteristics and determine the initial rate of the system.
A Helper spring is used to prevent the Main spring from becoming loose in the spring seat when the wheel is at full droop. The Helper spring, unlike the Tender spring, has very little spring rate, and therefore has no effect on the suspension characteristics of the vehicle. Up to 50mm of spring-to-perch gap can be covered with the use of a Helper spring.
Connecting Plates are used to connect Main and Tender springs. Eibach offers both inside and outside diameter connection plates depending upon the dimension and function of the specific damper utilized.
* Uncountable individual combination possibilities to create from standard spring components ex stock
* High spring travel (deflection) and therefore high end loads at short mounting lengths
* Block resistance
* Surface treated through shot-peening
* High dynamic durability (component longevity)
* Precise tolerances
* High quality corrosion protection by phosphating and epoxy coating
* Individual protective packaging
* Easy identification (imprinted with Part no.-indicates spring rate and physical dimensions)
About Us
Pitstoptuning is a small family owned business located in Georgia. We strive for 100% customer satisfaction, fast shipping, low prices, and hassle free returns! If you have any questions please feel free to send us a message via eBay.
Payment
We accept the following forms of payment.
For shipments to Georgia addresses, we are required by State law to collect 6% Sales Tax
Shipping
We offer free shipping to the contiguous US states. Please contact us for a shipping quotes to outside of contiguous US states.
Most orders are shipped within same business day if received before 3pm EST. Special orders from MFG's can take longer depending on the manufacturer, availability and etc.
Terms
Returns
Returns are accepted 30 days after the item is received. No returns accepted on installed items. All returns are subject to a 15% restocking fee. Returns are shipped back, paid by the buyer, and must be shipped via UPS or Fed Ex. No returns will be accepted until a RMA is issued and no refund will be issued until the product has been checked by us the seller.
