DSN6009 DC-DC Adjustable Step-up boost Power Converter Module based on XL6009 Replace LM2577
Description:
DSN6009 is a better performing 4A 400KHz switching frequency step-up boost module. This module is coming with the 3rd generation high-frequency switching technology regulator XL6009E1 as the core chip. The performance is much higher than the first generation technology LM2577.
Superior performance XL6009 boost module at a lower cost is about to eliminate the 50KHz LM2577.
Features:
- Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
- Wide Output voltage 5V ~ 35V;
- Built with 4A efficient MOSFET switches enableing efficiency up to 94%; (LM2577 current is 3A)
- high switching frequency 400KHz, can use small-capacity filter capacitors that can achieve very good results, the ripple smaller than LM2577 .
Test comparisons for reference:
Input 3V Output 12V 0.4A 4.8W
Input 5V Output 12V 0.8A 9.6W
Input 7.4V Output 12V 1.5A 18W
Input 12V Output 15V 2A 30W
Input 12V Output 16V 2A 32W
Input 12V Output 18V 1.6A 28.8W
Input 12V Output 19V 1.5A 28.5W
Input 12V Output 24V 1 A 24W
Vin X Iin X Efficiency = Vout X Iout
Where,
Vin = Input Voltage
Iin = input current
Vout = Output Voltage
Iout = output current
Technical parameters:
Model: DSN6009 boost module
Input Range: 3V ~ 32V
Output Range: 5V ~ 35V
Input Current: 4A (max), no-load 18mA
Conversion efficiency: <94%
Switching frequency: 400KHz
Output Ripple: 50mV
Load Regulation: ± 0.5%
Voltage Regulation: ± 0.5%
Operating Temperature: -40 ° ~ +85 °
Attention: do not plug this booster to your project before adjusting the potentiometer.
Package content:
1/2/5/10 X DSN6009 adjestable DC-DC step up power module.