Please Note the original taps do not fit these new cans . So you have to buy a different type that I sell they are the $20.00 ones that fit R134A gas cans as well Air conditioner Stop leak Sealer is very handy for sealing smaller leaks Mainly O rings and Seals And Hose Fittings in a car air conditioning systems .Especially systems that can cost $1000s to pull all the dash out and then maybe you cant get parts anymore . They do not block or clog up systems .The product also has Oil / A small amount of Gas Charge Plus Dye in it so you can check with an ultra blue light to find traces of the Yellow dye . This Sale is for the STOP LEAK Only . The Tap now is Different and is $20.00 Extra . The pictures are for reference only showing what sort of tap fits
The Hose /Tap and The Gas And the UV Light is separate to purchase if you like All items kept in stock all the time
IF you are not Capable of Handling Air
Conditioning jobs then please don’t buy and then Complain it Does Not Work , It
is not the product
NOTE IT IS BEST TO JUST PUT THE STOPLEAK INTO THE SYSTEM AND RUN FOR UP TO 30 MINS TO LET IT WORK ,WITHOUT THE HIGH GAS PRESSURE .THE CAN DOES NEED TO BE INVERTED TO GET ALL THE PRODUCT OUT
There are different packages available for what ever you need for the job Just ask me for info if you like see other pics .For different types of Taps , Connections , Gauges .Oil and dye devices to put Gas Oil or Dye in the system and for checking all the pressures . NOTE This Can of Stopleak takes a Tap that is suitable for cans that have a Valve in them not a Piercing type SEE other Listing
NOTE THERE IS A STOPLEAK THAT SEALS HOLES IN PIPES CONDENSERS AND EVAPORATORS . IT IS NEARLY TWICE THE PRICE BUT IF IT WORKS IN YOUR SYSTEM IT WILL BE CHEAPER THAN A WHOLE NEW SYSTEM . This can has the valve in the top so it has to have the right tap and hose to do the job . If you turn the Tap down to Hard when fitting you will damage the Valve and be Useless
When you use
this type of can with the inbuilt valve the tap only needs to be tightened
finger tight around 2 turns is usually pretty close . If you screw the tap down with force or a
spanner you will compress the in built valve and it will never work again . I find it best to try the tap on the can
after you screw it up wards first then when finger tight on the can turn the
tap down slowly with the can inverted and note when the gas flows slightly ,
Turn off slight lightly like half a turn will do then when putting the contents
into the system when all connected turn down a maximum of 2 turns to release
the gas if you want to stop the flow then turn the tap back 2 turns to stop
flow . All stop leak and gas etc work the same way if they have a valve built
into the can which any modern can has . If in Doubt please ask for more advice
. Please note any can with gas in it can cause burns etc so you need to be care
full when handling