- The DRL Halo is really bright even in full sun light and it goes all the way around the light - not just up the sides.
- The DRL Halo will turn off and flash Amber when indicating. 2 Seconds after indicating it will come back on.
- The light output is amazing.
- In High Beam mode the low beam is also on - this is a setting within the light to ensure maximum brightness in high beam.
- They are indestructable and water proof
- They come with all the wiring harness and canbus load modules required for your car
- You get ADR certification and according to Qld Dept Transport they are the only ADR approved light
- They are made by us here in Melbourne. Always consider buying Australian Made
When you buy a set of JTX LED 4x6 Headlights, you will be supplied with one of our Super Harnesses which account for the negative switching as well as CANBUS. This harness has 4 plugs, so is perfect for the Toyota Landcruiser 80 Series.
Our customers give a 12 out of 10 for low beam because it's well beyond their expectations
High beams rivals spot lights and way better than standard high beam
Wiring up the Day Running Lights is very easy. They get their earth through the 3 pin H4 headlight socket. The red wire is to power the primary DRL colour. So wire that to the parkers or to a power source that comes on with the ignition. The yellow wire powers the secondary colour which is typically amber in which case connect to indicator or to a separate switch if you have a twin colour set up like red and white.
JTX LED lights are made by us here in Melbourne. We carry all the components to make up all colour combinations. We make them up and send next day or even same day if we know soon enough. We are the only manufacturer of LED headlights in Australia. And in addition to our ADR approval the QLD Dept of Transport also need to discuss technical specifications with the manufacturer (and not the importer) and because they dont call China, then by default we become the only LED lights approved for QLD - please consider supporting Australian businesses.
These are 4"x6" rectangular headlights and they fit all 4"x6" rectangular applications such as Toyota Landcruier 80 and late 60-62 series. Also a lot of trucks and vans have 4x6 lights and they were popular in a lot of cars in the 70's and 80's. They are made to suit Australian left side of road so popular in old cars being brought to Australia and both lights are identical so no left or right side lights.
These are unbreakable. They come with a lifetime warranty and we will replace a light even if it is damaged in a collision. You cant even break them with a hammer.
They have breathers so as to avoid fogging or condensation and we have a breather kit option (just like diff breathers) for the serious off roader likely to do bonnet depth creek crossings. JTX are the preferred light chosen by the off road racing guys.
These suit Australian left side of road and satisfy the requirements of ADR 00/13. In fact they have the ADR ref stamped on the lens and come with an ADR compliance statement. We have demonstrated the manufacturing process, the Lumens of the chips etc to Police and state level departments of transport. Our JTX lights do not need to be self cleaning or self levelling to comply with ADR 00/13. We are presently undertaking specific lab testing for approval certification process to be extra sure.
Be aware there are plenty of cheaper alternatives out there which simply dont stack up. Most cheap lights fade or get a weathered yellow appearance after a year or so, they fog or fill up with water and they dont address the negative switching, polarity or blue dash light issues either. They wont be ADR compliant even by virtue that they are not made in Aus so authorities wont seek technical discussions with the overseas manufacturer. Even if the company professes to be Australian they still dont make the lights. Note that LED globes mounted in a conventional light is not ADR and the light must be made for LED built with in its entirity like these. Also lights with a series with rows of LED do not manage low beam well enough to be ADR compliant unlike these that manage low beam perfectly. And being made here in Aus you get the best back up support and warranty.
Non-halo ..... The following 2 lights have no halo at all. Available in either a black face or chrome face.
Halo flashes Amber ..... The following lights have Amber as their secondary color. Optionally connect the yellow wire to the indicator on each side and the halo will flash amber with your indicators.
RGB HALO ..... The following lights have an RGB rainbow halo which is controlled from your phone. Chose from a spectrum of colours using our very own JTX app. These are still road legal so long as the coloured halo is not used on the road.
Note that the halo on this light is not legal on the roads. The hi and low beams are legal but to remain legal on the road the halo must be off.
White and Colour Halo - when driving it's only legal to have white or amber facing forwards so the answer to having a car with a red theme and wanting red halo is for the halo to be White (which is legal) and at the flick of a switch it's red for when you want to show it off. But there's no indicator with these. Here are our options.
Here are our conventional 4x6" Semi Sealed Lights ....
Semi Sealed lights take H4 3 pin globes. We offer a huge range of H4 globe options ....
- Halogen - 65/55w, 100/90w, 130/90w and 130/100w
- LED - Philips
- JTX H4 HID kits - 35w, 55w & 70w
Our 4x6" Halo lights look and work like normal old headlights. Their crystal reflector manages the light distrubtion really well too. They are ADR approved and allowed in every state. They have a string of 30 very bright LEDs around the outside. You can make them come on with parkers or could have their own switch inside the car. Popular with the trucks, USA imports and stand out cars.
4x6"
Halo White
$102 pr
4x6"
Halo Amber
Ideal for indicators
$145 pr
4x6"
Halo Blue
$145 pr
4x6"
Halo Red
$145 pr
4x6"
Halo Green
$145pr
4x6" Spreads (Outers)
Ideal traditional all rounder. Vertical dispersion ripples in the glass spread the light wide.
Takes H4 globes
$72.50 pr
4x6 High Beam Inners
Smooth glass so no light dispersion - 100% focus forwards, ideal for high beam.
Takes H1 Globes
$72.50 pr
4x6" Combo, Inners and Outers
Get the full kit for your car
H4 Outers, H1 Inners
(Globes not included)
$125.50
Sealed Beam lights have the globes built inside during manufacture and they are totally sealed. There is no air or oxygen inside them so they cant rust inside. No water can get in so they are popular with the offroad enthusiast likely to negotiate deep water. Historically this was the original light in a lot of cars and so we sell a lot to people who want to freshen up with the same again. These are ADR compliant, E stamped and legal in all states. No wiring upgrades required with these.
4x6 outers,
Low and High Beam (40W/60W)
$72.50
4x6 Inners, High beam only, 55W.
$62.50
4x6 outers,
Low and High Beam (55W/60W)
$72.50
4x6 Inners, High beam only, 55W.
$62.50
About Us - JTX Lighting is an Australian family business and have been long time specialists in lighting products for cars, trucks, 4WD's and bikes. Whether you need to just replace a blown globe, want brighter lights, upgrading spotties with insanely bright HID or out to enhance the look of your ride JTX Lighting can rescue the night.
We are on the web and facebook as well as here on eBay.
When Steve is not making cool lights he's either building air suspension kits (Air Assist Suspension) for utes and commercial vehicles or running Cliffhanger which is Austrlaia's biggest week long offroad event . Hence his connection with all the offroad guys and them running JTX lights.
Payment
Shipping
We accept PayPal. It's automatic when you buy and almost everyone has a Pay Pal account nowadays.
If you don't have a Pay Pal account that's still OK, Ebay can take your card details when you buy and they use Pay Pal as their way of doing that. Your card details remain safe. Only Pay Pal see your details.
Your order will be dispatched on the same or next working day of your purchase.
EXPRESS - When you check out you may upgrade to Aus Post Express (Yellow Bag) which costs just a bit more.
All of our stock is here in Australia and ready to send to you straight away.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will make sure a replacement is sent.
Buy with confidence from JTX Lighting knowing your goods will be in your hands within a matter of days.
Returns
If you ordered the wrong size or type then we will swap it over - it's not a problem.
If you are not 100% satisfied with your purchase then just send it back for a refund or replacement - it's not a problem.
You have 30 days from purchase for a change of mind return or exchange request.
All of our items have at least a 12 month Warranty which covers replacement parts. Send the old part back to us for testing and we repair or replace it. We can make sure you send the right part back by asking you to do a few simple tests. Contact us by ebay message or reach out to us via the contact forms on our website.
For a lot of our products we actually make or assemble them right here in our Melbourne facility so we would have the parts and technical skill to make sure you are totally looked after.
Return address is 2 / 228 Marine Pde Hastings Vic 3915
The JTX Lighting Guarantee
We are based in Melbourne and all of our stock is here in Melbourne. You are not waiting for postage from China with a company pretending to be in Australia. So you will get your goods within a matter of days.
We can handle all your after sales support needs, guarantee the parts fit and will fix or replace them under warranty, all from Melbourne and again within days.
