Shars CAT50 3/4 x 1.38" Shell Face Mill Holder Adapter CNC .0002" New
Using as coolant shell mill holder with face mill coolant style arbor screw
Product Code
202-5376
Product description
- Cat Taper: 50
- Bore Dia. in Shell mill: 3/4"
- Gage Length: 1.38"
- Shell mill pilot T.I.R <0.0002"
Product features
- H6 arbor tolerance to improve cutter chattering and overall cutting tool life
- T.I.R. 0.0002" measured from CAT50 taper to face and arbor
- Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification.
On the side of flange where a half spherical hole is located, a "wall" is built around this hole to compensate
the weight of the metal chips lost from forming this spherical hole. This design allows the left side and right
side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside
a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high
speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
- Made from alloy steel harden to 54-60 HRc
- Taper ground to AT3 or better accuracy standard for maximum contact with spindle.
- All of SHARS CAT/BT/HSK tool holder use Stotz Air/Electronic Gaging for production
and finish inspection. Stotz has been chosen by major aircraft companies as the best and
most consistent gaging for tool holder shanks
- All critical surface are precision ground
- Each holder comes with a lab certificate on its taper accuracy and runout measurement
-
- Other import tool holder are ground before hardened which would lead to deformation
- and less accurate after the heat treat process; Shars tool holder is ground after heat treat
would hold its accuracy over longer period of time
- Using as coolant shell mill holder with face mill coolant style arbor screw 202-6294
| Order# 202-6294 $8.50/pc |
| Coolant Style Arbor Screw |
| Arbor Dia.: 3/4''; Dia.: 0.56; Thread Size: 3/8''-24 |
 |
We have more Replacement Arbor Screw available:
| Order# 202-5312 $3.10/pc |
| Arbor Dia.: 3/4''; Dia.: 0.874; Thread Size: 3/8''-24 |
 |
Click the photo to the item page
| Order No. 404-1867 | Order No. 404-1868 | Order No. 404-2628 |
| 2" 90° Square Shoulder Indexable Face Mill | 2-1/2" 90° Square Shoulder Indexable Face Mill | 2-1/2" 45° Indexable Face Mill |
 |
|
 |
| Order No. 404-2677 | Order No. 404-2678 |
| 2" 90° Square Shoulder Coolant Thru Indexable Face Mill | 2-1/2" 90° Square Shoulder Coolant Thru Indexable Face Mill |
 |
 |
We have other shell mills, end mills & face mills available at My Ebay Store:
SHARS 6 670V CNC Milling Vise .0004 D675 Part No. 202-0994
To learn more, click here to 202-0994
 |
 |
 |
 |
- Jaw Width: 6"
- Jaw Opening (Inner Jaw): 8.95"
- Jaw Opening (Outer Jaw): 17"
- Jaw Height: 1-3/4"
- Bed Height: 2.875" +/-0.0005"
- Jaw Plate Threads: 1/2"-13
- Jaw Plate Threads Spacing: 3.875"
- Clamping Repeatability: +/-0.0004"
- Weight: 90 Lbs
SHARS 6" 660U Milling Vise +/-0.0004 Part No. 202-0995
To learn more, click here to 202-0995
 |
 |
 |
 |
- 6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening
- Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
- Made from 80,000PSI stress relief cast iron
- Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
- Bed height Tolerance 3.189" +/-0.0005"
- Clamping repeatability +/-0.0004"
- Lifetime limited warranty
SHARS 6" 600DS Double Station Milling Vise +/-0.0002 Part No. 202-0999
To learn more, click here to 202-0999
 |
 |
 |
 |
- 6" wide jaw plate
- 4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)
- Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
- Jaw lift prevention mechanism by eccentric pin design
- Made from 80,000PSI stress relief cast iron
- Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
- Bed height Tolerance 3.25" +/-0.0005" (matched bed height at no additional cost)
- Clamping repeatability +/-0.0002"
- Lifetime limited warranty
All Available to Ship NOW! at Fixed Prices
SHIPPING: UPS Ground
Buyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept : VISA, MasterCard and E-Check on PayPal.com
Illinois residents add 8% sales tax.
Illinois residents add 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.