Product Information

Durapro Head Gasket suits Toyota 3RZ-FE

Item Specifics
SKU: GSS2113KCD
Returns: 30 Days
Ships From: Melbourne

Description

Durapro (GSS2113KCD) Head Gasket

Variations for this Engine

These are the different Variations for the Toyota 3RZ-FE 4 Cylinder Petrol Engine. Please check carefully you have selected the right part for your vehicle.

Suitable For

Toyota
Hilux RZN149 3RZ-FE
Hilux RZN154 3RZ-FE
Hilux RZN169 3RZ-FE
Hilux RZN174 3RZ-FE
Landcruiser Prado RZJ120 3RZ-FE
Landcruiser Prado RZJ95 3RZ-FE

Overview

Graphflex® by Durapro® is a performance head gasket. Graphflex® head gaskets are composed of a 100% graphite facing material combined with a perforated steel core and stainless steel combustion flanges. The graphite facing material can withstand the motion of the cylinder head and block and the heat often experienced in a performance engine.

Because Graphflex® head gaskets are made from pure A-grade graphite they have a natural property which consists of thousands of flaky particles. Each flake is designed to withstand the movement of a cylinder head and block by acting similar to a multi-layered steel head gasket.

Graphflex® head gaskets also have a unique property referred to as “thermal conductivity”. That means the material actually transfers the heat away from the heat source. One good example of this is the small block Chevrolet. The back to back exhaust valves on this engine tends to create a lot of heat, often resulting in a burnt out head gasket. The Graphflex® head gasket allows the heat to move away from the hot spot to the coolant holes of the gasket, helping to prevent a head gasket burn out.

Plus, all Graphflex® head gaskets are genuine non re-torque and are impervious to corrosive coolants, fuels and oils. These are major problems for non-graphite based head gaskets and are solved by using a Graphflex® head gasket. Most Durapro® gasket sets include Graphflex® head gaskets similar to those used as original equipment by car manufacturers.

All Durapro® sets incorporate only the best materials that are all designed to perform better right down to the smallest detail. As a result these sets are all original equipment standard and come complete in most cases with genuine NOK® oil seals, US manufactured soft cuts, the highest grade cork componentry and silicon rubber and metal components that are second to none.

Durapro® gaskets are available to suit a full range of Australian, American, British, Japanese and Korean applications.

Other Parts for this Engine

These are the different parts available for the Toyota 3RZ-FE 4 Cylinder Petrol Engine

Camshaft Gears
Nason TTG35 Camshaft gear Suits camshaft with two locatating dowels
Camshafts
Nason CAM1018 Camshaft Inlet - Chilled Iron
Nason Exhaust CAM1017 Camshaft Exhaust 4 & 8 Port Cylinder Head - Chilled Iron
Chassis and Driveline
Mackay A5125 Engine Mount Bush Engine mount rear of engine
Suits Hilux RZN169 and RZN174 models with manual and automatic transmission
Mackay PP2543 Brake Pedal Pad Brake pedal pad (auto)
Conrod Bearings
Conversion Gasket Sets
Cylinder Heads
Nason 959989 Cylinder head bare Bare Head - 8 Intake Ports
Nason 959989-B Cylinder head - assembled Assembled Head - 8 Intake Ports
Nason 960026 Cylinder head bare Bare Head - 4 Intake Ports
Nason 960026-B Cylinder head - assembled Assembled Head - 4 Intake Ports
Drive Belt Ancillaries
Nuline (EP013) Idler/Tensioner Pulley Tensioner pulley airconditioner (steel)
Suits Hilux and Landcruiser models
Tensioner pulley power steering (steel)
Suit Hilux models
Exhaust Gaskets
Fan Clutches
Filters
K&N (E-2233) Filter Air filter (reusable)
Suits Hilux models
K&N HP-1002 Oil Filter Performance oil filter
height 95mm
K&N HP-2009 Oil Filter Performance oil filter
height 129mm
Full Gasket Sets
Harmonic Balancers
Head Bolts and Studs
Head Gaskets
Hose and Fittings
Mackay CH2682 Connecting Pipe (Heater Hose) Heater hose (outlet from heater)
Suits Hilux models
Mackay CH2689 Connecting Pipe (Heater Hose) Heater hose
Suits Hilux models
Mackay CH2692 Connecting Pipe (Heater Hose) Heater hose (inlet A)
Suits Hilux models
Mackay CH2694 Connecting Pipe (Heater Hose) Heater hose (without metal fitting)
Suits Hilux models
Mackay CH2698 Radiator Hose (Top) Top hose
Suits Hilux RZN147/RZN154 and RZN174 models
Suits Hilux RZN169 models to 1999
Mackay CH2774 Radiator Hose (Bottom) Bottom hose no. 2
Suits Hilux models
Mackay CH3786 Radiator Hose (Bottom) Bottom hose
Suits Landcruiser Prado RZJ95 models
Mackay CH4786 Radiator Hose (Top) Top hose
Suits Landcruiser Prado RZJ95 models
Mackay CH4895 Radiator Hose (Top) Top hose
Suits Hilux RZN169 models from 1999
Mackay CH5105 Radiator Hose (Top) Top hose
Suits Landcruiser Prado RZJ120 models
Mackay CH5448 Radiator Hose (Bottom) Bottom hose
Suits Landcruiser Prado RZJ120 models
Inlet Manifold Gasket
Lifters
16 x Nason VL1004 Lifter 31.00mm OD - Use With VLS28-#### Shims
Nason VL1004 Lifter 31.00mm OD - Use With VLS28-#### Shims
Main Bearings
Manifold Gaskets
Misc Gaskets
Miscellaneous
Piston Rings Cast
TP (36004-STD) STD Piston Rings Cast STD 020 040
Suits OE pistons only
1.5mm/1.5mm/4mm
Pistons
Endurotec (PTO3RZ40001E) STD Pistons Set Of 4 STD 020 040 (set of 4) Rings not included
Use RS4715 piston rings
(includes anodising on crown & MOS2 coating on skirt)
Compression height 37.5mm -2.67mm
Endurotec (PTO3RZ40201E) +020 Pistons Set Of 4 STD 020 040 (set of 4) Rings not included
Use RS4715 piston rings
(includes anodising on crown & MOS2 coating on skirt)
Compression height 37.5mm -2.67mm
Endurotec (PTO3RZ40401E) +040 Pistons Set Of 4 STD 020 040 (set of 4) Rings not included
Use RS4715 piston rings
(includes anodising on crown & MOS2 coating on skirt)
Compression height 37.5mm -2.67mm
Rear Main Seals
Durapro (GSNK055D) Crankshaft Seal Rear ID 88 mm x OD 106mm x depth 8.5mm
Permaseal NK055 Crankshaft seal rear NK055 88 x 106 x 8.5mm
Small End Bushes
Thrust Washers
Timing Chain Tensioners and Guides
Timing Chains
Timing Cover Seals
Durapro (GSNJ200D) Crankshaft Seal Front ID 48mm x OD 68mm x depth 7mm
Timing Gasket Sets
Timing Kits
Endurotec (TK-TY308-A) Timing Belt Kit With gears (includes balance shaft chain)
Endurotec (TK-TY308-B) Timing Belt Kit Without gears (includes balance shaft chain)
Valve Cover Gaskets
Valve Guides
8 x Nason PVG5493 Valve guide OD 0.4345" x ID 0.236" x Length 1.595"
Nason PVG5493 Valve guide OD 0.4345" x ID 0.236" x Length 1.595"
Valve Regrind Gasket Set (VRS)
Valve Spring Retainers
Valve Springs
Valve Stem Seals
Valves-Exhaust
8 x Nason EX3241 Exhaust Valve Hilux with 3RZE Engine 1995-On
JCMC (EVTO-69-E (SS)) Exhaust Valve Head 30.6mm x length 103.9mm x stem 6mm
JCMC (EVTO-69-E) Exhaust Valve Head 30.6mm x length 103.9mm x stem 6mm
Nason EX3241 Exhaust Valve Hilux with 3RZE Engine 1995-On
Valves-Inlet
Water Pumps

Web Store Pty Ltd is a Melbourne based warehouse with thousands of the latest products at great prices. We hand select our range of Australian designed products from only the best local suppliers. We pride ourselves on our customer service and our friendly team are available to assist you through the buying process. When comparing prices know we only sell great quality items and our manufacturing passes strict quality checks before posting.

To ensure a smooth transaction, please follow the payment instructions laid out in the eBay system. If you are new to eBay and unsure how to purchase, please don't hesitate to get in contact with us as our Customer Service team will be happy to assist.

The simplest way to facilitate payment is via Mastercard, Visa, or Paypal via the Checkout process.

Please contact us if yous wish to pay via direct deposit and then we can supply our Account and BSB details.

If paying by bank deposit, please ensure you have your reference of your payment with your eBay user ID so we can identify the payment as yours. Failure to correctly reference your payment will cause a delay in our system which will ultimately delay the shipment of your order.
We check our bank accounts daily so as soon as your payment has cleared, we will start processing your order.

Our stock levels can change at any time. An order is only complete once payment has cleared. To prevent missing out, it's best to pay as soon as possible. Once a payment has cleared, 90% of products are dispatched within 1 business day, however please see our shipping page for estimated shipping times by state. Wedding Wish is not liable for any unidentified payments or delays of delivery due to failure to follow instructions during checkout.

For all payments outside of eBay, please ensure you send us the reference you used, the day and time you paid, and the amount deposited.

As always, if you have any questions, please get in contact with our Customer Service team who are more than happy to help.

We are happy to combine shipping on any orders. Individual listings with combined shipping will automatically calculate on checkout. When buying from multiple listings, please message us prior to purchase to confirm postage rates, be sure to include your postcode for accurate quoting and the items you are after. Express post is available on request for most orders, please note handing times will usually still apply.

Pre-arranged pickup is available from our warehouse in Dingley Village, Victoria. Please note that a handling time will still apply. Please call ahead or email us to ensure item is available for pickup.

POSTAGE & DISPATCH

After payment is cleared 90% of all items are dispatched within two business days, however please see below for estimated delivery times by state. Your item will be sent via courier or Australia Post depending on its size and weight.

Where goods are sent through Australia Post, the buyer may receive a knock on the door or a card in their letterbox indicating their item is available for pickup from their local post office.

A re-delivery fee will be charged to buyers for items that are undeliverable and/or returned due to incorrect delivery address or unsuccessful delivery.

Buyers have the full responsibility to provide us with the correct delivery address and mobile phone number on the checkout page before payment. Any changes to address after checkout will not be considered as valid.

Our staff work tirelessly to ensure customer satisfaction however we understand that on occasion issues do arise. If you have a problem with your purchase please contact us PRIOR to leaving feedback and we will do our best to rectify the situation.

Claims entered directly via this method will be given priority.

The fastest and best way to contact us is through the eBay messaging system. If you contact us out of eBay we may not see your message and our support team will be much slower in dealing with your issue. Thank you for your business!

Copyright (C) 2018 Web Store Pty Ltd. All Rights Reserved