Product Information

JCMC Inlet/Intake Valve suits Holden 186 Red

Item Specifics
SKU: EVHO-01-I
Returns: 30 Days
Ships From: Melbourne

Description

JCMC Inlet/Intake Valve suits Holden Petrol 186 Red see list below for supported models and engines

Head 1.493¨ x length 4.508¨ x stem 0.344¨

Specifications

Head Size1.493 Inches
Length4.508 Inches
Stem Size0.344 Inches

Variations for this Engine

These are the different Variations for the Holden 186 Red 6 Cylinder Petrol Engine. Please check carefully you have selected the right part for your vehicle.

EVL (SC 36962 TUF) Inlet/Intake Valve Head 1.493¨ x length 4.508¨ x stem 0.349¨
EVL (SC 37061 TUF) Inlet/Intake Valve Head 1.68¨ x length 4.558¨ x stem 0.349¨
JCMC (DEVELOP) Inlet/Intake Valve Head 1.68¨ x length 4.558¨ x stem 0.344¨
JCMC (EVHO-01-I 013) Inlet/Intake Valve Head 1.493¨ x length 4.508¨ x stem 0.349¨
JCMC (EVHO-01-I) Inlet/Intake Valve Head 1.493¨ x length 4.508¨ x stem 0.344¨
JCMC (EVHO-11-I) Inlet/Intake Valve Head 1.68¨ x length 4.558¨ x stem 0.344¨

Suitable For

Bedford
CF series Holden 173 Red
CF series Holden 202 Red
Holden
48/215 (FX) 132 Grey
Commodore VB 173 Red
Commodore VB 202 Red
EH 149 Red
EH 179 Red
EJ 138 Grey
EK 138 Grey
FB 138 Grey
FC 132 Grey
FE 132 Grey
FJ 132 Grey
HD 149 Red
HD 179 Red
HG 161 Red
HG 186 Red
HJ 202 Red
HJ 173 Red
HK 161 Red
HK 186 Red
HQ 161 Red
HQ 173 Red
HQ 202 Red
HR 149 Red
HR 161 Red
HR 186 Red
HT 161 Red
HT 186 Red
HX 202 Red
HZ 202 Red
Torana LC 161 Red
Torana LC 138 Red
Torana LC 173 Red
Torana LH 202 Red
Torana LH 173 Red
Torana LJ 202 Red
Torana LJ 138 Red
Torana LJ 173 Red
Torana LX 173 Red
Torana LX 202 Red
Torana UC 202 Red
Torana UC 173 Red
Various 186-202 Performance

Overview

Hoga Industry Co. Ltd. was established in 1976 and specializes in the production of high quality engine valves. The company is ISO-9002 compliant and is an original equipment supplier to both Daihatsu and Peugeot in their domestic market.

With the cooperation of the Aeronautical Systems Research Division at Chung Shan Institute of Science and Technology they have had excellent achievements from the research and development of materials, heat treatment and machining processes.

All JCMC valves are Tufftrided to prolong life in both unleaded and LPG vehicles.

Other Parts for this Engine

These are the different parts available for the Holden 186 Red 6 Cylinder Petrol Engine

Camshaft Bearings
Camshafts
Sealed Power (55-400) Prelube Camshaft assembly lube 4oz.
Sealed Power (55-403) Prelube Camshaft assembly lube 1-1/2oz.
Chassis and Driveline
Mackay A1156 Engine Mount Bush Engine mount left hand and right hand side
(2 required)
Suits HG, HK and HT models
Conrod Bearings
Conversion Gasket Sets
Cooling
Tridon Thermostat Gasket Paper Style Gasket. Self Adhesive Back. - TTG5 Thermostat gasket
Check illustration for correct application
Crankshaft Gears
JP JP5934 Crankshaft gear Crankshaft Gear Helical Single Keyway
Exhaust Gaskets
Filters
K&N E-3492 Air Filter Air filter (reusable)
Suits all models using standard air cleaner assy.
K&N PS-2003 Oil Filter Oil filter
96mm OD X 119mm height
K&N PS-2006 Oil Filter Oil filter (Narrow)
76mm OD X 121mm height
Full Gasket Sets
Durapro (GSFG391D) Full Gasket Set Includes rope rear main seal
Durapro (GSFG392D) Full Gasket Set Includes OEM style rear main seal
Harmonic Balancers
Head Gaskets
Hose and Fittings
Mackay BC19 Universal Blanking Cap 19 mm Water pump cap (19mm 3/4¨)
Suits HT models
Mackay CH1018 Connecting Pipe (Heater Hose) Hose (manifold outlet)
Suits HK-HT-HG models with 186S engines without power steering
Mackay CH1124 Connecting Pipe (Heater Hose) Heater hose (inlet with fan type heater)
Suits HK models
Mackay CH637 Radiator Hose (Bottom) Bottom hose
Suits HR models
Mackay CH735 Connecting Pipe (Heater Hose) Hose (manifold inlet and outlet 438mm length)
Suits HR models (except X2 & S) without power steering
Suits HT models except 186S
Suits HG models
Mackay CH787 Radiator Hose (Top) Top hose
Suits HK-HT-HG models without airconditioner
Mackay CH791 Crankcase Breather (Engine Breather Hose) Hose (engine breather 750mm length)
Suits HT-HG models except 186S
Lifters
12 x Nason AT992 Lifter Solid Mechanical Lifter - Flat Tappet
12 x Nason RHT817R Lifter Hydraulic Anti Pump Up Lifter
Delphi RHT817-USA Lifter Hydraulic Lifter
Nason AT992 Lifter Solid Mechanical Lifter - Flat Tappet
Nason RHT817R Lifter Hydraulic Anti Pump Up Lifter
Main Bearings
ACL Duraglide 001 7M2384-001 Main bearing set Overwidth flanges undersizes:Std=Std 010/020=Std+004" 030/040=Std+008"
ACL Duraglide 010 7M2384-010 Main bearing set Overwidth flanges undersizes:Std=Std 010/020=Std+004" 030/040=Std+008"
ACL Duraglide 020 7M2384-020 Main bearing set Overwidth flanges undersizes:Std=Std 010/020=Std+004" 030/040=Std+008"
ACL Duraglide STD 7M2384-STD Main bearing set Overwidth flanges undersizes:Std=Std 010/020=Std+004" 030/040=Std+008"
King Engine Bearings (MB7724AM +001) Main Bearings STD 001 010 020 030 040
Shaft 2.1978¨/2.1988¨ 55.824/55.850mm
Tunnel 2.3906/2.3916¨ 60.721/60.746mm
King Engine Bearings (MB7724AM +010) Main Bearings STD 001 010 020 030 040
Shaft 2.1978¨/2.1988¨ 55.824/55.850mm
Tunnel 2.3906/2.3916¨ 60.721/60.746mm
King Engine Bearings (MB7724AM +030) Main Bearings STD 001 010 020 030 040
Shaft 2.1978¨/2.1988¨ 55.824/55.850mm
Tunnel 2.3906/2.3916¨ 60.721/60.746mm
King Engine Bearings (MB7724AM +040) Main Bearings STD 001 010 020 030 040
Shaft 2.1978¨/2.1988¨ 55.824/55.850mm
Tunnel 2.3906/2.3916¨ 60.721/60.746mm
King Engine Bearings (MB7724AM STD) Main Bearings STD 001 010 020 030 040
Shaft 2.1978¨/2.1988¨ 55.824/55.850mm
Tunnel 2.3906/2.3916¨ 60.721/60.746mm
Manifold Gaskets
Misc Gaskets
Miscellaneous
Oil Pumps
Piston Cylinder Sleeves
6 x Nason N3623C X 6.5 Sleeve Semi Finished: ID 3.593" x OD 3.873" x Length 6.500"
6 x Nason N3625A X 6.500 Sleeve Semi Finished: ID 3.595" x OD 3.749" x Length 6.500"
Nason N3623C X 6.5 Sleeve Semi Finished: ID 3.593" x OD 3.873" x Length 6.500"
Nason N3625A X 6.500 Sleeve Semi Finished: ID 3.595" x OD 3.749" x Length 6.500"
Piston Rings Cast
Hastings (653) STD Piston Rings Cast STD 020 030 040 060 080
5/64¨/5/64¨/3/16¨
Hastings (653020) +020 Piston Rings Cast STD 020 030 040 060 080
5/64¨/5/64¨/3/16¨
Hastings (653030) +030 Piston Rings Cast STD 020 030 040 060 080
5/64¨/5/64¨/3/16¨
Hastings (653040) +040 Piston Rings Cast STD 020 030 040 060 080
5/64¨/5/64¨/3/16¨
Hastings (653060) +060 Piston Rings Cast STD 020 030 040 060 080
5/64¨/5/64¨/3/16¨
Piston Rings Chrome
Hastings (2C653) STD Piston Rings Chrome STD 020 030 040 060
5/64¨/5/64¨/3/16¨
Hastings (2C653020) +020 Piston Rings Chrome STD 020 030 040 060
5/64¨/5/64¨/3/16¨
Hastings (2C653030) +030 Piston Rings Chrome STD 020 030 040 060
5/64¨/5/64¨/3/16¨
Hastings (2C653040) +040 Piston Rings Chrome STD 020 030 040 060
5/64¨/5/64¨/3/16¨
Hastings (2C653060) +060 Piston Rings Chrome STD 020 030 040 060
5/64¨/5/64¨/3/16¨
Piston Rings Moly
Hastings (2M653040) +040 Piston Rings Moly STD 020 030 040 060
5/64¨/5/64¨/3/16¨
Hastings (2M653060) +060 Piston Rings Moly STD 020 030 040 060
5/64¨/5/64¨/3/16¨
Pistons
Endurotec (PHO18660001E) STD Pistons Set Of 6 STD 030 040 060 080 (set of 6) Rings not included
Use RS1256 piston rings
Compression height 1.8¨
Endurotec (PHO18660301E) +030 Pistons Set Of 6 STD 030 040 060 080 (set of 6) Rings not included
Use RS1256 piston rings
Compression height 1.8¨
Endurotec (PHO18660601E) +060 Pistons Set Of 6 STD 030 040 060 080 (set of 6) Rings not included
Use RS1256 piston rings
Compression height 1.8¨
Pushrods
Rear Main Seals
Rocker Arms and Kits
Sealed Power (MR-1751) Rocker Arm Nut 3/8¨ rocker arm nuts (pack of 4)
Sump Gasket Sets
Timing Cover Seals
Durapro (GSNA417D) Crankshaft Seal Front ID 45mm x OD 61.5mm x depth 9.3mm
Timing Gasket Sets
Valve Cover Gaskets
Valve Guides
JCMC (VGHO-08-Z) Valve Guide Cast iron
OD 0.502¨ x ID 0.343¨ x length 2.125¨
Valve Regrind Gasket Set (VRS)
Valve Spring Retainers
Valve Stem Seals
Valves-Exhaust
EVL (BM 36856 TUF) Exhaust Valve Head 1.368¨ x length 4.504¨ x stem 0.349¨
JCMC (EVHO-01E +0.13) Exhaust Valve Head 1.276¨ x length 4.506¨ x stem 0.349¨
JCMC (EVHO-01-E) Exhaust Valve Head 1.276¨ x length 4.506¨ x stem 0.344¨
JCMC (EVHO-05-E) Exhaust Valve Head 1.368¨ x length 4.504¨ x stem 0.349¨
JCMC (EVHO-05-E) Exhaust Valve Head 1.368¨ x length 4.504¨ x stem 0.344¨
JCMC (EVHO-11-E +0.13) Exhaust Valve Head 1.432¨ x length 4.558¨ x stem 0.349¨
JCMC (EVHO-11-E) Exhaust Valve Head 1.432¨ x length 4.558¨ x stem 0.344¨
JCMC (EVHO-24-E) Exhaust Valve Head 1.368¨ x length 4.504¨ x stem 0.344¨
Valves-Inlet
EVL (SC 36962 TUF) Inlet/Intake Valve Head 1.493¨ x length 4.508¨ x stem 0.349¨
EVL (SC 37061 TUF) Inlet/Intake Valve Head 1.68¨ x length 4.558¨ x stem 0.349¨
JCMC (DEVELOP) Inlet/Intake Valve Head 1.68¨ x length 4.558¨ x stem 0.344¨
JCMC (EVHO-01-I 013) Inlet/Intake Valve Head 1.493¨ x length 4.508¨ x stem 0.349¨
JCMC (EVHO-01-I) Inlet/Intake Valve Head 1.493¨ x length 4.508¨ x stem 0.344¨
JCMC (EVHO-11-I) Inlet/Intake Valve Head 1.68¨ x length 4.558¨ x stem 0.344¨
Water Pumps
GMB (GWHD-02A) Water Pump Up to 1969 (small hub) 2.250¨
GMB (GWHD-02A) Water Pump Up to 1969 (small hub) 2.250¨

Web Store Pty Ltd is a Melbourne based warehouse with thousands of the latest products at great prices. We hand select our range of Australian designed products from only the best local suppliers. We pride ourselves on our customer service and our friendly team are available to assist you through the buying process. When comparing prices know we only sell great quality items and our manufacturing passes strict quality checks before posting.

To ensure a smooth transaction, please follow the payment instructions laid out in the eBay system. If you are new to eBay and unsure how to purchase, please don't hesitate to get in contact with us as our Customer Service team will be happy to assist.

The simplest way to facilitate payment is via Mastercard, Visa, or Paypal via the Checkout process.

Please contact us if yous wish to pay via direct deposit and then we can supply our Account and BSB details.

If paying by bank deposit, please ensure you have your reference of your payment with your eBay user ID so we can identify the payment as yours. Failure to correctly reference your payment will cause a delay in our system which will ultimately delay the shipment of your order.
We check our bank accounts daily so as soon as your payment has cleared, we will start processing your order.

Our stock levels can change at any time. An order is only complete once payment has cleared. To prevent missing out, it's best to pay as soon as possible. Once a payment has cleared, 90% of products are dispatched within 1 business day, however please see our shipping page for estimated shipping times by state. Wedding Wish is not liable for any unidentified payments or delays of delivery due to failure to follow instructions during checkout.

For all payments outside of eBay, please ensure you send us the reference you used, the day and time you paid, and the amount deposited.

As always, if you have any questions, please get in contact with our Customer Service team who are more than happy to help.

We are happy to combine shipping on any orders. Individual listings with combined shipping will automatically calculate on checkout. When buying from multiple listings, please message us prior to purchase to confirm postage rates, be sure to include your postcode for accurate quoting and the items you are after. Express post is available on request for most orders, please note handing times will usually still apply.

Pre-arranged pickup is available from our warehouse in Dingley Village, Victoria. Please note that a handling time will still apply. Please call ahead or email us to ensure item is available for pickup.

POSTAGE & DISPATCH

After payment is cleared 90% of all items are dispatched within two business days, however please see below for estimated delivery times by state. Your item will be sent via courier or Australia Post depending on its size and weight.

Where goods are sent through Australia Post, the buyer may receive a knock on the door or a card in their letterbox indicating their item is available for pickup from their local post office.

A re-delivery fee will be charged to buyers for items that are undeliverable and/or returned due to incorrect delivery address or unsuccessful delivery.

Buyers have the full responsibility to provide us with the correct delivery address and mobile phone number on the checkout page before payment. Any changes to address after checkout will not be considered as valid.

Our staff work tirelessly to ensure customer satisfaction however we understand that on occasion issues do arise. If you have a problem with your purchase please contact us PRIOR to leaving feedback and we will do our best to rectify the situation.

Claims entered directly via this method will be given priority.

The fastest and best way to contact us is through the eBay messaging system. If you contact us out of eBay we may not see your message and our support team will be much slower in dealing with your issue. Thank you for your business!

Copyright (C) 2018 Web Store Pty Ltd. All Rights Reserved