Product Information

Edelbrock PERFORMER CARB 500CFM E-CHOKE suits Ford 289 302 5.0 Litre (EFI) Windsor Performance

Item Specifics
SKU: 1403
Returns: 30 Days
Ships From: Melbourne

Description

Edelbrock 1403 Performer Series 500 CFM Carburetor with Electric Choke, Satin Fi suits Ford Various 289 302 5.0 Litre (EFI) Windsor Performance see list below for supported models and engines

Performer Series 500 CFM Carburetor with Electric Choke, Satin Finish (non-EGR)

The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1403 Performer Series 500 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Without a doubt the Edelbrock line of carburetor’s are the most innovative and dependable street performance carburetor’s available.

Specifications

Body Color Satin Finish
Choke Type Electric
Marine Approved No
Maximum Flow Rating 500 cfm
Primary Jet Diameter 0.086 in

Variations for this Engine

These are the different Variations for the Ford Car 289 302 5.0 Litre (EFI) Windsor Performance V8 Petrol Engine. Please check carefully you have selected the right part for your vehicle.

Edelbrock 1400 Performer Series 600 CFM Carburetor with Electric Choke in Satin Performer series 600 CFM (calibrated for fuel economy)
Includes electric choke and EGR provision
Edelbrock 1405 Performer Series 600 CFM Carburetor with Manual Choke, Satin Fini Performer series 600 CFM (calibrated for performance)
Includes manual choke and no EGR provision
Edelbrock 14053 Performer Series 600 CFM Carburetor with Manual Choke, Black Fin Performer carburettor
600cfm, 4 barrel, square bore
Manual choke, single inlet
Black
Edelbrock 1406 Performer Series 600 CFM Carburetor with Electric Choke, Satin Fi Performer series 600 CFM (calibrated for fuel economy)
Includes electric choke and no EGR provision
Edelbrock 1407 Performer Series 750 CFM Carburetor with Manual Choke, Satin Fini Performer series 750 CFM (calibrated for performance)
Includes manual choke and no EGR provision
Edelbrock 14073 Performer Series 750 CFM Carburetor with Manual Choke, Black Fin Performer carburettor
750cfm 4 barrel, square bore, manual choke
Black
Edelbrock 1410 Marine Series 750 CFM Carburetor with Electric Choke (non-EGR) Performer series marine 750 CFM (calibrated for performance)
Includes electric choke and no EGR provision
Edelbrock 1411 Performer Series 750 CFM Carburetor with Electric Choke, Satin Fi Performer series 750 CFM (calibrated for economy with performance)
Includes electric choke and no EGR provision
Edelbrock 1412 Performer Series EPS 800 CFM Carburetor with Manual Choke, Satin Performer series 800 CFM (calibrated for performance)
Includes manual choke and no EGR provision
Edelbrock 1479 Performer Series Calibration Kit for #1405 Carburetors Carburettor calibration kit (suits 1405 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1480 Performer Series Calibration Kit for #1407, #1410, #1412 & #1413 Carburettor calibration kit (suits 1407, 1410, 1412 and 1413 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1485 Performer Series Calibration Kit for #1409 - 4.3L 90° V6 & Perfor Carburettor calibration kit (suits 1409 carburettor on 4.3 litre engine)
Includes an assortment of metering rods and jets
Edelbrock 1486 Performer Series Calibration Kit for #1403, #1404, #1801-#1804 Ca Carburettor calibration kit
(suits 1803 and 1804 single carburettor applications only)
Includes an assortment of metering rods and jets
Edelbrock 1487 Performer Series Calibration Kit for #1406 Carburetors Carburettor calibration kit (suits 1406 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1489 Performer Series Calibration Kit for #1411 Carburetors Carburettor calibration kit (suits 1411 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1804 Thunder Series AVS 500 CFM Carburetor with Manual Choke, Satin Fi Thunder Series 800cfm manual choke carburettor
Dual quad Non EGR
Edelbrock 1812 Thunder Series AVS 800 CFM Carburetor with Manual Choke, Satin Fi Thunder series 800 CFM (calibrated for optimum street performance)
Includes manual choke and no EGR provision
Edelbrock 1813 Thunder Series AVS 800 CFM Carburetor with Electric Choke, Satin Thunder Series 800cfm electric choke carburettor
Non EGR
Edelbrock 1825 Thunder Series AVS 650 CFM Off-Road Carb with Manual Choke, Satin Thunder series 650 CFM (calibrated for optimum off road performance)
Includes manual choke and no EGR provision
Edelbrock 1826 Thunder Series AVS 650 CFM Off-Road Carb with Electric Choke, Sat Thunder series 650 CFM (calibrated for optimum off road performance)
Includes electric choke and no EGR provision
Edelbrock 1841 Thunder AVS Carburetor Calibration Kit for #1812 & 1813 Carbureto Carburettor calibration kit (suits 1812 and 1813 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1842 Thunder AVS Carburetor Calibration Kit for #1825 & 1826 Carbureto Carburettor calibration kit (suits 1825 and 1826 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 2696 Carb Adapter for 4150 Square-Bore to Stock Quadrajet & Thermo Adapter plate
(adapts Edelbrock carburettor to Quadrajet or Thermo-Quad manifolds)

Suitable For

Chevrolet
Various 283 305 307 327 350 400 Performance
Ford Car
Various 289 302 5.0 Litre (EFI) Windsor Performance
Holden
Various 253 308 5.0 Performance
Various 307 327 350 Performance
Pontiac
Laurentian 283
Parisienne 283
Parisienne 327

Other Parts for this Engine

These are the different parts available for the Ford Car 289 302 5.0 Litre (EFI) Windsor Performance V8 Petrol Engine

Camshaft Bearings
Durabond (351HP) Camshaft Bearings Suits SVO blocks with 2.204¨ tunnel and stepped cam journal sizes
Durabond (351HPT) Camshaft Bearings Suits SVO blocks with 2.204¨ tunnel and stepped cam journal sizes (includes high performance coating)
Durabond (351RHP) Camshaft Bearings Suits SVO blocks with 2.204¨ tunnel and common cam journal sizes
Camshafts
Sealed Power (55-400) Prelube Camshaft assembly lube 4oz.
Sealed Power (55-403) Prelube Camshaft assembly lube 1-1/2oz.
Carburettors
Edelbrock 1400 Performer Series 600 CFM Carburetor with Electric Choke in Satin Performer series 600 CFM (calibrated for fuel economy)
Includes electric choke and EGR provision
Edelbrock 1405 Performer Series 600 CFM Carburetor with Manual Choke, Satin Fini Performer series 600 CFM (calibrated for performance)
Includes manual choke and no EGR provision
Edelbrock 14053 Performer Series 600 CFM Carburetor with Manual Choke, Black Fin Performer carburettor
600cfm, 4 barrel, square bore
Manual choke, single inlet
Black
Edelbrock 1406 Performer Series 600 CFM Carburetor with Electric Choke, Satin Fi Performer series 600 CFM (calibrated for fuel economy)
Includes electric choke and no EGR provision
Edelbrock 1407 Performer Series 750 CFM Carburetor with Manual Choke, Satin Fini Performer series 750 CFM (calibrated for performance)
Includes manual choke and no EGR provision
Edelbrock 14073 Performer Series 750 CFM Carburetor with Manual Choke, Black Fin Performer carburettor
750cfm 4 barrel, square bore, manual choke
Black
Edelbrock 1410 Marine Series 750 CFM Carburetor with Electric Choke (non-EGR) Performer series marine 750 CFM (calibrated for performance)
Includes electric choke and no EGR provision
Edelbrock 1411 Performer Series 750 CFM Carburetor with Electric Choke, Satin Fi Performer series 750 CFM (calibrated for economy with performance)
Includes electric choke and no EGR provision
Edelbrock 1412 Performer Series EPS 800 CFM Carburetor with Manual Choke, Satin Performer series 800 CFM (calibrated for performance)
Includes manual choke and no EGR provision
Edelbrock 1479 Performer Series Calibration Kit for #1405 Carburetors Carburettor calibration kit (suits 1405 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1480 Performer Series Calibration Kit for #1407, #1410, #1412 & #1413 Carburettor calibration kit (suits 1407, 1410, 1412 and 1413 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1485 Performer Series Calibration Kit for #1409 - 4.3L 90° V6 & Perfor Carburettor calibration kit (suits 1409 carburettor on 4.3 litre engine)
Includes an assortment of metering rods and jets
Edelbrock 1486 Performer Series Calibration Kit for #1403, #1404, #1801-#1804 Ca Carburettor calibration kit
(suits 1803 and 1804 single carburettor applications only)
Includes an assortment of metering rods and jets
Edelbrock 1487 Performer Series Calibration Kit for #1406 Carburetors Carburettor calibration kit (suits 1406 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1489 Performer Series Calibration Kit for #1411 Carburetors Carburettor calibration kit (suits 1411 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1804 Thunder Series AVS 500 CFM Carburetor with Manual Choke, Satin Fi Thunder Series 800cfm manual choke carburettor
Dual quad Non EGR
Edelbrock 1812 Thunder Series AVS 800 CFM Carburetor with Manual Choke, Satin Fi Thunder series 800 CFM (calibrated for optimum street performance)
Includes manual choke and no EGR provision
Edelbrock 1813 Thunder Series AVS 800 CFM Carburetor with Electric Choke, Satin Thunder Series 800cfm electric choke carburettor
Non EGR
Edelbrock 1825 Thunder Series AVS 650 CFM Off-Road Carb with Manual Choke, Satin Thunder series 650 CFM (calibrated for optimum off road performance)
Includes manual choke and no EGR provision
Edelbrock 1826 Thunder Series AVS 650 CFM Off-Road Carb with Electric Choke, Sat Thunder series 650 CFM (calibrated for optimum off road performance)
Includes electric choke and no EGR provision
Edelbrock 1841 Thunder AVS Carburetor Calibration Kit for #1812 & 1813 Carbureto Carburettor calibration kit (suits 1812 and 1813 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 1842 Thunder AVS Carburetor Calibration Kit for #1825 & 1826 Carbureto Carburettor calibration kit (suits 1825 and 1826 carburettors)
Includes an assortment of metering rods and jets
Edelbrock 2696 Carb Adapter for 4150 Square-Bore to Stock Quadrajet & Thermo Adapter plate
(adapts Edelbrock carburettor to Quadrajet or Thermo-Quad manifolds)
Chassis and Driveline
Fel-Pro (2302) Axle Hsg. Cover or Diff. Seal Diff gasket set (suits Ford 9¨)
Conrod Bearings
Clevite (CB-634HN(x8)) STD Conrod Bearings Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634HN-1(x8)) +001 Conrod Bearings Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634HN-10(x8)) +010 Conrod Bearings Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634HXN(x8)) STD Conrod Bearings Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634P(8)) STD Conrod Bearings Set STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634P-1(8)) +001 Conrod Bearings Set STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634P-10(8)) +010 Conrod Bearings Set STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634P-20(8)) +020 Conrod Bearings Set STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Clevite (CB-634P-30(8)) +030 Conrod Bearings Set STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Engine Bearings (CR 804SI +010) Conrod Bearings STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Engine Bearings (CR 804SI +020) Conrod Bearings STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Engine Bearings (CR 804SI +030) Conrod Bearings STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Engine Bearings (CR 804SI +040) Conrod Bearings STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Engine Bearings (CR 804SI STD) Conrod Bearings STD 010 020 030 040 060
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR804HPN) STD Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR804HPN001) +001 Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR804HPN020) +020 Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR804XPN) STD Set of 8 Conrod Bearings STD STDX 010
XP Xtreme Performance Tri-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR804XPN010) +010 Set of 8 Conrod Bearings STD STDX 010
XP Xtreme Performance Tri-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR804XPNSTDX) STDX Set of 8 Conrod Bearings STD STDX 010
XP Xtreme Performance Tri-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR855HP000) STD Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal with dowel
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR855HP000X) STDX Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal with dowel
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR855HP001) +001 Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal with dowel
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR855HP010) +010 Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal with dowel
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
King Racing (CR855HP020) +020 Set of 8 Conrod Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal with dowel
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Speed Pro (8-7160CH 10) Connecting Rod Bearing Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Speed Pro (8-7160CH) Connecting Rod Bearing Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Speed Pro (C8-7160CH 10) Connecting Rod Bearing Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Speed Pro (C8-7160CH) Connecting Rod Bearing Set STD STDX 001 010 010X 011 020 (set of 8)
HP Pro Series Bi-metal
Shaft 2.1228/2.1236¨ 53.919/53.939mm
Tunnel 2.2390/2.2398¨ 56.871/56.891mm
Conrods
Lunati (60554001-8) FORD SMALL BLOCK W/ CHEVY ROD-1 Lunati Signature Series I-beam (length 5.4¨)
Suits 2.1¨ journal crankshafts
Includes ARP2000 cap screws
Lunati (70554001-8) FORD SMALL BLOCK-2 Lunati Voodoo H-beam (length 5.4¨)
Suits 2.1¨ journal crankshafts
Lunati (70554002-8) 4340 H-Beam Rod Set - SBF 5.400 in. Lunati Voodoo H-beam (length 5.4¨)
Suits 2.123¨ journal crankshafts
Cooling
Crankshafts
Lunati (70534001) Voodoo Crankshaft - Ford 302 Small Block 3.400" Stroke Lunati Voodoo Series crankshaft
3.400¨ stroke 4340 nitrided forged
Use 2.100¨ journals 5.400¨ conrods
Cylinder Heads
Edelbrock 5023 Small-Block Ford E-Street Cylinder Heads 1.90" Alloy E-Street (assembled pair)
60cc chamber x 170cc intake runner
Inlet valve 1.9¨ x exhaust valve 1.6¨
1.25¨ OD valve springs
Edelbrock 5025 Small-Block Ford E-Street Cylinder Heads 2.02" Alloy E-Street (assembled pair)
60cc chamber x 170cc intake runner
Inlet valve 2.02¨ x exhaust valve 1.6¨
1.25¨ OD valve springs
Edelbrock 5027 Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft Edelbrock E-205 assembled heads (pair)
60cc chamber, 205cc inlet port, 2.080" x1.600" stainless valves
1.460" valve springs with .650" max lift
Edelbrock 5028 Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft Spri Edelbrock E-Series 205 assembled alloy cylinder head.
Includes 60cc chambers and 205cc intake runners.
Valve springs suit hydraulic flat tappet camshafts.
Edelbrock 602515 RPM Small-Block Ford 2.02 Cylinder Head Hydraulic Roller Spring Performer RPM cylinder head assembled (includes 60cc chamber 170cc intake runners and polished finish)
Edelbrock 60359 Performer Small-Block Ford 2.02" Cylinder Head Hydraulic Flat Ta Alloy Performer (assembled)
60cc chamber x 170cc intake runner
Inlet valve 2.02¨ x exhaust valve 1.6¨
1.46¨ OD valve springs
Edelbrock 60399 Performer Small-Block Ford 5.0L/ 5.0L Cylinder Head 2.02" Edelbrock Performer alloy assembled cylinder head. Includes 60cc chambers 170cc intake runners and 2.02¨ intake valves.
Edelbrock 77189 Victor Jr Small-Block Ford Cylinder Head Hydraulic Flat Springs Edelbrock Victor Jr assembled alloy 20° cylinder head. Includes 60cc chambers 210cc intake runners and valve springs to suit a mechanical flat tappet or hydraulic roller camshafts.
Edelbrock 77199 Victor Jr Small-Block Ford Cylinder Head Hydraulic Roller Spring Edelbrock Victor Jr assembled alloy 20° cylinder head. Includes 60cc chambers 210cc intake runners and valve springs to suit a mechanical roller camshaft.
Edelbrock 77219 Victor Jr Small-Block Ford Cylinder Head Bare Victor 15° cylinder head (bare) includes 47cc chamber 240cc intake runners
Edelbrock 77319 Victor- Glidden 2 Small-Block Ford Cylinder Head Bare Edelbrock Pro Port Semi Finished head
Glidden Victor II 11.3° 24cc chamber, 1.34" xz 1.77" port entry (inlet) suits 2.24" x 1.64" valves
Dress Up Gear
Edelbrock 1207 Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element Air filter assembly (chrome 14¨ x 3-5/16¨)
Suits Holley, Quadrajet, Carter AFB 5-1/8¨ diameter carburettors
Edelbrock 4203 Aluminum Racing Bolt Down Die Cast Breather - Polished Breather (bolt on polished aluminium) Includes Edelbrock logo
Edelbrock 4400 2-Piece Valve Cover Wing Bolts With T-Top Valve cover wing bolts (3-3/4¨ long)
Edelbrock 4401 2-Piece Valve Cover Wing Bolts With T-Top Valve cover wing bolts (4-1/4¨ long)
Edelbrock 4403 Signature Series Black Push-in Breather Breather (push on black) Includes Edelbrock logo
Edelbrock 4405 Chrome Valve Cover Breather Breather (push on chrome) Includes Edelbrock logo
Edelbrock 4410 Signature Series Chrome Round push-in Breather with 90° PCV Port Breather (push on chrome) Includes 90° nipple and Edelbrock logo
Edelbrock 4415 Chrome Engine Oil Filler Cap for 1 1/4" hole Oil filler cap (push on chrome) Includes Edelbrock logo
Drive Belt Ancillaries
Nuline (EP004) Idler/Tensioner Pulley 1987-95 (flat idler pulley) (alternate no.)
Nuline (EP018) Idler/Tensioner Pulley 1987-95 (grooved idler pulley)
Nuline (EP026) Idler/Tensioner Pulley AU models 8/98 on (grooved idler pulley)
Nuline (EP060) Idler/Tensioner Pulley AU models 8/98 on (flat idler pulley)
Nuline (EP062) Idler/Tensioner Pulley AU models 8/98 on (flat idler pulley a/c)
Exhaust Gaskets
Fel-Pro (1415) Exhaust Manifold Gasket Set Performance
Port size 1.25¨ x 1.48¨
Fel-Pro (1416) Exhaust Manifold Gasket Set Performance (suits Boss 302 engines only)
Port size 1.89¨ x 2.19¨
Fel-Pro (1486) Exhaust Manifold Gasket Set Performance (1.4¨ x 1.4¨)
Fel-Pro (1487) Exhaust Manifold Gasket Set Performance (suits Dart and TFS cylinder heads)
Port size 1.42¨ x 1.62¨
Fasteners
Speed Pro (BP1) Engine Lubr Bolt Protector Kit Conrod bolt protectors (1 Pair)
Filters
K&N HP-3001 Oil Filter Performance oil filter
Height 145mm
K&N PS-3001 Oil Filter Oil filter
Height 145mm
Harmonic Balancers
Powerbond (HB1008N) Harmonic Balancer Counterweight hub - 3 bolt with counter sunk pulley locator
Powerbond (HB1009N) Harmonic Balancer Counterweight hub - 3 bolt with counter sunk pulley locator
Powerbond (HB1060N) Harmonic Balancer Standard, Counterweight hub - 4 bolt, check pulley locator
Suits Falcon XT-XY
Fairlane ZB-ZD
Powerbond (HB1070N) Harmonic Balancer Counterweight ring - 4 bolt, check timing mark
Powerbond (HB1098N) Harmonic Balancer Counterweight hub 104.6mm wide
4 bolt, check pulley locator
Powerbond (HB1202N) Harmonic Balancer Standard counterweight hub - 3 bolt with raised pulley locator, OD 161.5mm
Suits Falcon XR-XY 9/1966-3/72
Fairlane ZA-ZD 3/1967-3/72
Powerbond (HB1203N) Harmonic Balancer Standard, Counterwieght hub - 3 bolt raised pulley locator
Suits Falcon XT-XW 3/1968-3/72
Fairlane ZB-ZD 3/1968-3/72
OD 166mm
Powerbond (HB1205N) Harmonic Balancer Standard, Counterweight hub 89mm wide
4 bolt, check pulley locator
Powerbond (PB1008ST) Harmonic Balancer Steel, street performance
Counterweight hub - 3 bolt with counter sunk pulley locator
Powerbond (PB1009SS) Harmonic Balancer Steel, race performance
Counterweight hub - 3 bolt with counter sunk pulley locator
Powerbond (PB1009ST) Harmonic Balancer Steel, street performance
Counterweight hub - 3 bolt with counter sunk pulley locator.
Powerbond (PB1060SS) Harmonic Balancer Steel, race performance
Counterweight hub - 4 bolt, check pulley locator
Powerbond (PB1060ST) Harmonic Balancer Steel, street performance
Counterweight hub - 4 bolt, check pulley locator
Powerbond (PB1070ST) Harmonic Balancer Steel, street performance
Counterweight ring - 4 bolt, check timing mark
Powerbond (PB1086SS) Harmonic Balancer Steel (race perfromance)
Neutral balanced 4 bolt
Powerbond (PB1086ST) Harmonic Balancer Steel, street perfromance
Neutral bal. 4-bolt.
Powerbond (PB1202ST) Harmonic Balancer Steel, street performance, counterweight hub - 3 bolt with raised pulley locator. 6.5" O.D.
Powerbond (PB1203SS) Harmonic Balancer Steel, race performance
Counterweight hub - 3 bolt with raised pulley locator
Suits Falcon XT-XW 3/1968-3/72
Fairlane ZB-ZD 3/1968-3/72
Powerbond (PB1203ST) Harmonic Balancer Steel, street performance
Counterweight hub - 3 bolt with raised pulley locator
Head Bolts and Studs
Edelbrock 9680 Ford 5.0L Head Bolt Bushings Cylinder head bolt hole bushings (pack of 20) Use to adapt 7/16¨ head bolts to aftermarket and 351W heads with 1/2¨ bolt holes.
Head Gaskets
Cometic (C5479-051) .051" Cylinder Head Gasket Cometic MLS head gasket
4.060¨ bore .051¨ thickness
Cometic (C5481-040) .040" Cylinder Head Gasket Cometic MLS .040" thick, 4.100" bore
Cometic (C5483-040) .040" Cylinder Head Gasket Cometic MLS .040" thick, 4.155" bore
Cometic (C5512-040) .040" Cylinder Head Gasket Cometic MLS .040" thick, 4.060" bore
Non SVO
Cometic (C5515-040) .040" Cylinder Head Gasket Cometic MLS .040" thick, 4.155" bore
Non SVO
Cometic (C5517-040) .040" Cylinder Head Gasket Cometic MLS .040" thick, 4.200" bore
Non SVO
Cometic (C5910-040) .040" Cylinder Head Gasket Cometic MLS .040" thick, 4.080" bore
Suits AFR heads.
Durapro (GSBD870GP) Head Gasket Graphite 1.30mm thick
Fel-Pro (1006) Head Gasket Performance (Loc-wire)
Requires receiver groove
4.145¨ bore .039¨ thick (8.7cc volume)
Fel-Pro (1011-1) Head Gasket Performance (pre-flattened steel wire)
4.1¨ bore .041¨ thick (9cc volume)
Fel-Pro (1011-2) Head Gasket Performance (pre-flattened copper wire)
Will not brinell aluminium cylinder heads
4.1¨ bore .039¨ thick (8.5cc volume)
Fel-Pro (1021) End Yoke Performance (pre-flattened steel wire)
4.1¨ bore .041¨ thick (9.2cc volume)
Suits 302 SVO engines only
Fel-Pro (1022) Head Gasket Performance (pre-flattened steel wire)
4.15¨ bore .041¨ thick (9.5cc volume)
Suits 302 SVO engines only (left hand side)
Fel-Pro (1023) Head Gasket Performance (pre-flattened steel wire)
4.15¨ bore .041¨ thick (9.5cc volume)
Suits 302 SVO engines only (right hand side)
Fel-Pro (1031 L) Head Gasket Performance (pre-flattened steel wire)
4.15¨ bore .041¨ thick (9.5cc volume)
Suits 302 SVO engines only (left hand side)
Fel-Pro (1031 R) Head Gasket Performance (pre-flattened steel wire)
4.15¨ bore .041¨ thick (9.5cc volume)
Suits 302 SVO engines only (right hand side)
Fel-Pro (1046) Head Gasket Performance (pre-flattened steel wire)
4.2¨ bore .051¨ thick (11.7cc volume)
Suits 302 SVO engines only
Fel-Pro (1133) Head Gasket Performance (multi layer steel)
4.1¨ bore .041¨ thick (9.2cc)
Fel-Pro (1135) Head Gasket Performance (multi layer steel)
4.21¨ bore .041¨ thick (9.4cc)
Fel-Pro (8346 PT) Head Gasket Suits Boss engines only
Hose and Fittings
Mackay CH2210 Radiator Hose (Bottom) Bottom hose
Suits F100 models 9/85-12/87
Mackay CH2308 Radiator Hose (Top) Top hose
Suits F100 models 9/85-12/87
Ignition
Lunati (88289) DIST GEAR, BRONZE MSD .467 FS Bronze distributor gear ( .467¨ shaft )
Lunati (89030) Everwear™ Dist Gear - Ford 302-351 0.500 Shaft Everwear distributor gear (suits all cam types) .500¨ ID
MSD (8352) Ford 289/302 Ready-To-Run Distributor Ford 289/302 Ready-To-Run Distributor
Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an iron gear and a rev limiter
Now includes built-in Rev Limiter!
Powerful built-in module produces a 7.5 amp single spark through high rpm
Easy-to-adjust mechanical advance with supplied springs and stop bushings
Vacuum advance canister for improved economy (can be locked out)
MSD (8479) Ford 289/302 Street Pro-Billet Ford 289/302 Street Pro-Billet
Small diameter distributor for 289/302 engines, includes iron gear and vacuum advance. Must be used with an MSD 6, 7 or 8-series ignition.
Billet housing is 5/8” smaller in diameter than stock Ford distributors
CARB E.O. Approved
Easy-to-adjust mechanical advance with supplied springs and stop bushings
Vacuum advance canister for improved economy (can be locked out)
MSD (84791) Ford 289/302 Street Pro-Billet w/Steel Gear Ford 289/302 Street Pro-Billet w/Steel Gear
The Street models share the same features as the small diameter models, plus feature a vacuum advance.
Includes Steel Gear, compatible with hydraulic roller camshafts
Must be used with an MSD Ignition Control
Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
Nylon pads ensure smooth operation of the advance weights
MSD (8579) Ford 302 Small Diameter Pro-Billet Distributor Ford 302 Small Diameter Pro-Billet Distributor
Great for blower or manifold clearance. Fits 289/302 engines, includes iron gear. Must be used with an MSD 6, 7 or 8-series ignition.
Billet housing is 5/8” smaller in diameter than stock Ford distributors
Must be used with an MSD Ignition Control
Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
Nylon pads ensure smooth operation of the advance weights
MSD (8598) Ford 289/302 Billet Distributor Ford 289/302 Billet Distributor
Fits 289, 302 with steel gear for hydraulic roller cams. Must be used with an MSD 6, 7 or 8-series ignition.
CNC machined billet aluminum housing and Dupont Rynite base
Supplied with Cap-A-Dapt and rotor (accepts MSD socket style caps)
Must be used with an MSD Ignition Control
Mechanical advance assembly can be locked out for crank trigger systems
Inlet Manifold Gasket
Fel-Pro (1250 S-3) Intake Manifold Gasket Set Stock 1.20¨x2.00¨port size
Set
Fel-Pro (1250) Intake Manifold Gasket Set Performance (port size 1.28¨ x 2¨)
Fel-Pro (1262) Intake Manifold Gasket Set Performance (port size 1.28¨ x 2.1¨)
Inlet Manifolds
Edelbrock 20354 RPM Dual-Quad manifold and carb Kit for Small-Block Ford 289-302 Performer RPM dual quad intake & carb kit (Endurashine finish)
Edelbrock 2121 Performer 289 Intake Manifold for Small-Block Ford Performer 260-289-302 dual plane inlet manifold (idle to 5500 RPM)
No EGR provision
Edelbrock 29285 # 29285 Super Victor 8.2 EFI Intake Manifold Small-Block Ford Super Victor 8.2 EFI intake manifold (4500-9000 RPM)
Edelbrock 3830 Replacement Gasket, Throttle Body Flange, 65/70MM Gasket Set Throttle body gasket (suits 65 and 70mm throttle bodies)
Edelbrock 3835 1994-95 Mustang Throttle Body Adapter Thottle body adapter (adapts ED3845 throttle body to ED3821 inlet manifold)
Edelbrock 7121 # 7121 Performer RPM 302 Int. Manifold, S/B Ford, 289-302, (Non-E Performer RPM 289-302 dual plane inlet manifold (1500 to 6500 RPM)
No EGR provision
Edelbrock 7521 RPM Air-Gap 302 Intake Manifold Small-Block Ford 289-302-347 in S RPM air-gap dual plane inlet manifold (1500 to 6500 RPM)
No EGR provision
Edelbrock 9265 Heat Insulator Gasket for Open 4150 Square-Bore - 0.320" Thick Heat insulator gasket (open square bore)
0.320" thick.
Main Bearings
Clevite (MS-590H) STD Main Bearings Set STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590H-1) +001 Main Bearings Set STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590H-10) +010 Main Bearings Set STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590HX) STD Main Bearings Set STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590P) STD Main Bearings Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590P-1) +001 Main Bearings Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590P-10) +010 Main Bearings Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590P-20) +020 Main Bearings Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590P-30) +030 Main Bearings Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Clevite (MS-590P-40) +040 Main Bearings Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Engine Bearings (MB 529SI +010) Main Bearings STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Engine Bearings (MB 529SI +020) Main Bearings STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Engine Bearings (MB 529SI STD) Main Bearings STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB5162HP001) +001 Set of 5 Main Bearings STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB5162HP010) +010 Set of 5 Main Bearings STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB5162HP020) +020 Set of 5 Main Bearings STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB529HP) STD Set of 5 Main Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB529HP001) +001 Set of 5 Main Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB529HP010) +010 Set of 5 Main Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB529HP011) +011 Set of 5 Main Bearings STD STDX 001 010 010X 011 020
HP Pro Series Bi-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB529XP) STD Set of 5 Main Bearings STD STDX 010
XP Xtreme Performance Tri-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB529XP001) +001 Set of 5 Main Bearings STD STDX 010
XP Xtreme Performance Tri-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
King Racing (MB529XPSTDX) STDX Set of 5 Main Bearings STD STDX 010
XP Xtreme Performance Tri-metal
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Sealed Power (4125MA 10) Main Bearing Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Sealed Power (4125MA 20) Main Bearing Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Sealed Power (4125MA 30) Main Bearing Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Sealed Power (4125MA 40) Crankshaft Main Bearing Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Sealed Power (4125MA) Main Bearing Set STD 010 020 030 040
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Speed Pro (129M 1) Main Bearing Set STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Speed Pro (129M 10) Main Bearing Set STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Speed Pro (129M 1X) Main Bearing Set STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Speed Pro (129M) Main Bearing Set STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Speed Pro (C129M 10) Main Bearing Set STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Speed Pro (C129M) Main Bearing Set STD STDX 001 010 010X 011 020
Alecular performance
Shaft 2.2482/2.2490¨ 57.104/57.125mm
Tunnel 2.4412/2.4420¨ 62.006/62.027mm
Manifold Gaskets
Fel-Pro (MS 90361) Intake Manifold Gasket Set Suits 351W 1975-91 models & 302 1977-85
Misc Gaskets
Cometic (C5263) .047" Fiber Carburetor Gaskets Cometic Holley 4150 .047¨ fibre base gasket (1x 3.770¨ x 3.880¨ hole)
Fel-Pro (17660) Thermostat Gasket Marine (thermostat housing set)
Suits Mercruiser only
Fel-Pro (17665) Thermostat Gasket Marine (thermostat housing set)
Suits OMC only
Fel-Pro (2707-1) R.A.C.E. Set R.A.C.E. set, (Remainder to Assemble Complete Engine)
sets typically include gaskets and seals for the water pump, timing cover, fuel pump, thermostat housing, oil pump, and a rear main seal. This kit includes (2 pc. RMS)
Fel-Pro (2718) R.A.C.E. Set R.A.C.E. set, (Remainder to Assemble Complete Engine)
sets typically include gaskets and seals for the water pump, timing cover, fuel pump, thermostat housing, oil pump, and a rear main seal. This kit includes (1 pc. RMS)
Oil Pumps
Melling (10687) Oil Pump Stock volume high performance oil pump.
Includes extended drive shaft for additional support at high RPM levels.
Cover is doweled to the pump housing to assure alignment of shaft bores.
The housing and cover are CNC machined and
maganese phosphate coated for wear and rust prevention.
The relief valve has a pressure adjustable screw in plug instead of a cup plug.
Works with OE type bolt on pickup screen.
Melling (10688) Hi Volume Oil Pump High volume high performance oil pump (25% more volume)
Includes extended drive shaft for additional support at high RPM levels.
Cover is doweled to the pump housing to assure alignment of shaft bores.
The housing and cover are CNC machined and
maganese phosphate coated for wear and rust prevention.
The relief valve has a pressure adjustable screw in plug instead of a cup plug.
Works with OE type bolt on pickup screen.
Oiling System
Canton Racing Products 12-444 Ford 289-302 Shallow Dry Sump Power Pan Right Hand Exits Dry Sump Oil Pan
Small Block Ford 289-302
Shallow Power Series
Two -12AN Right Side Pickups
Canton Racing Products 13-600 Ford 289-302 Drag Race Stock Eliminator Rear Sump Pan Drag Race Oil Pan
Small Block Ford 289-302
Rear Sump
5 Quarts
Canton Racing Products 13-630A Ford 289-302 Front Sump Baffled Aluminum Pan Drag Race Oil Pan
Aluminium
Small Block Ford 289-302 SVO
Front Sump
8 Quarts
Canton Racing Products 15-600 For Ford 289-302 Stock Replacement Front Sump Pan Stock replacement front sump
Suits 289 and 302
Does not fit Mustang II
Pan requires CN15601 pickup
Canton Racing Products 15-610 For Ford 289-302 Front T Sump Street Pan Street / Strip Oil Pan
Ford 289-302
Front Sump
7 Quarts
Canton Racing Products 15-611 Oil Pump Pickup Ford 302 For 15-610 Front Sump Street Pan Oil Pan Pickup
Ford 302, Front Sump
For CN15610, CN15630 Oil Pan
Canton Racing Products 15-625 Oil Pump Pickup Ford 302 For 15-620 Rear Sump Pan W/ Steel Girdle Oil Pan Pickup
Ford 302, Deep Rear Sump
Use with CN15620S Oil Pan
Canton Racing Products 15-627 Oil Pump Pickup Ford 302 For 15-620 Rear Sump Pan W/ Girdle Oil Pan Pickup
Ford 302, Deep Rear Sump
Use with CN15620S Oil Pan
Canton Racing Products 15-644 For Ford 289-302 Rear T Sump Road Race Pan Street / Strip Oil Pan
Ford 289-302
Rear Sump
7 Quarts
Canton Racing Products 15-645 Oil Pump Pickup Ford 302 For 15-644 Rear T Sump Pan Oil Pan Pickup
Ford 302, Rear Sump
Use with CN15644, CN15646 Oil Pan
Canton Racing Products 20-930P Windage Tray For Ford 289 302 Rear Sump Louver Louvered Windage Tray - Stock/Aftermarket
Ford 289-302
Rear Sump
Canton Racing Products 20-932P Windage Tray For Ford 351W Rear Sump Louver Louvered Windage Tray - Stock/Aftermarket
Ford 351W
Rear Sump
Canton Racing Products 20-960 Windage Tray For 21-060 Main Support Ford 289 302 Main Support Windage Tray
SB-Ford 289-302
For Main Cap Support CN21060
Piston Rings Cast
Sealed Power (E-251X 20) Standard Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251X 40) Standard Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251X 60) Standard Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251X 80) Standard Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251X) Standard Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Piston Rings Moly
Hastings (2M139) STD Piston Rings Moly STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Hastings (2M139005) +005 Piston Rings Moly STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Hastings (2M139040) +040 Piston Rings Moly STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Hastings (2M139080) +080 Piston Rings Moly STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Hastings (2M4726) STD Piston Rings Moly STD 020 030 040 060
1.5mm/1.5mm/4mm
Hastings (2M4726020) +020 Piston Rings Moly STD 020 030 040 060
1.5mm/1.5mm/4mm
Hastings (2M4726030) +030 Piston Rings Moly STD 020 030 040 060
1.5mm/1.5mm/4mm
Hastings (2M4726040) +040 Piston Rings Moly STD 020 030 040 060
1.5mm/1.5mm/4mm
Hastings (2M4726060) +060 Piston Rings Moly STD 020 030 040 060
1.5mm/1.5mm/4mm
Hastings (2M5508005) +005 Piston Rings Moly STD 005 025 030 035 045 065
Double moly 5/64¨ 5/64¨ 3/16¨
Hastings (2M5508025) +025 Piston Rings Moly STD 005 025 030 035 045 065
Double moly 5/64¨ 5/64¨ 3/16¨
Hastings (2M5508045) +045 Piston Rings Moly STD 005 025 030 035 045 065
Double moly 5/64¨ 5/64¨ 3/16¨
Hastings (2M5508065) +065 Piston Rings Moly STD 005 025 030 035 045 065
Double moly 5/64¨ 5/64¨ 3/16¨
Hastings (2M5521005) +005 Piston Rings Moly 005 025 030 035 040 045 065
Double moly 1/16¨ 1/16¨ 1/8¨
Hastings (2M5521025) +025 Piston Rings Moly 005 025 030 035 040 045 065
Double moly 1/16¨ 1/16¨ 1/8¨
Hastings (2M5521035) +035 Piston Rings Moly 005 025 030 035 040 045 065
Double moly 1/16¨ 1/16¨ 1/8¨
Hastings (2M5521045) +045 Piston Rings Moly 005 025 030 035 040 045 065
Double moly 1/16¨ 1/16¨ 1/8¨
Hastings (2M5521065) +065 Piston Rings Moly 005 025 030 035 040 045 065
Double moly 1/16¨ 1/16¨ 1/8¨
Hastings (2M5523005) +005 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (2M5523025) +025 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (2M5523035) +035 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (2M5523045) +045 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (2M5523065) +065 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (2M5525030) +080 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (CM5532) STD Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (CM5532020) +020 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (CM5532030) +030 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (CM5532040) +040 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Hastings (CM5532060) +060 Piston Rings Moly STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Sealed Power (E-251K 20) Premium Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251K 30) Premium Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251K 40) Premium Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251K 60) Premium Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Sealed Power (E-251K) Premium Piston Ring Set STD 020 030 040 060 080
5/64¨ 5/64¨ 3/16¨
Speed Pro (R-19100 35) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-19100 45) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-19100 5) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-19100 65) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-8902) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-9281 35) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-9342 35) Premium Piston Ring Set 005 025 030 035 040 045 065
Double moly 1/16¨ 1/16¨ 1/8¨
Speed Pro (R-9342 45) Premium Piston Ring Set 005 025 030 035 040 045 065
Double moly 1/16¨ 1/16¨ 1/8¨
Speed Pro (R-9343 35) Premium Piston Ring Set STD 005 025 030 035 045 065
Double moly 5/64¨ 5/64¨ 3/16¨
Speed Pro (R-9357 35) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-9771 35) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Speed Pro (R-9771 65) Premium Piston Ring Set STD 005 025 030 035 040 045 060 065
(1/16¨/1/16¨/3/16¨)
Plasma moly top ring
Pistons
Fel-Pro (OS 34508 R) Oil Pan Gasket Set One piece oil pan gasket
Hypatec (PFO30280002H) STD Pistons Set Of 8 STD 020 030 040 060 Hypatec dish top (set of 8) Rings not included
Use RS2271 piston rings
Compression height 1.587¨ -0.060¨
Hypatec (PFO30280202H) +020 Pistons Set Of 8 STD 020 030 040 060 Hypatec dish top (set of 8) Rings not included
Use RS2271 piston rings
Compression height 1.587¨ -0.060¨
Hypatec (PFO30280302H) +030 Pistons Set Of 8 STD 020 030 040 060 Hypatec dish top (set of 8) Rings not included
Use RS2271 piston rings
Compression height 1.587¨ -0.060¨
Hypatec (PFO30280402H) +040 Pistons Set Of 8 STD 020 030 040 060 Hypatec dish top (set of 8) Rings not included
Use RS2271 piston rings
Compression height 1.587¨ -0.060¨
Hypatec (PFO30280602H) +060 Pistons Set Of 8 STD 020 030 040 060 Hypatec dish top (set of 8) Rings not included
Use RS2271 piston rings
Compression height 1.587¨ -0.060¨
Hypatec (PFO302FT80003H) STD Pistons Set Of 8 STD 020 030 040 060 Hypatec flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.587¨
Hypatec (PFO302FT80203H) +020 Pistons Set Of 8 STD 020 030 040 060 Hypatec flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.587¨
Hypatec (PFO302FT80303H) +030 Pistons Set Of 8 STD 020 030 040 060 Hypatec flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.587¨
Hypatec (PFO302FT80403H) +040 Pistons Set Of 8 STD 020 030 040 060 Hypatec flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.587¨
Hypatec (PFO302FT80603H) +060 Pistons Set Of 8 STD 020 030 040 060 Hypatec flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.587¨
Hypatec (PFO34780001H) STD Pistons Set Of 8 STD 030 040 060 Hypatec dish top (set of 8)
0.912¨ pin diameter rings not included
Use RS65007 piston rings
Compression height 1.090¨ -0.060¨
Speed Pro (H273CP 20) X8 Cast Piston STD 020 030 040 060 Speed Pro flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.605¨
Speed Pro (H273CP 30) X8 Cast Piston STD 020 030 040 060 Speed Pro flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.605¨
Speed Pro (H273CP 40) X8 Cast Piston STD 020 030 040 060 Speed Pro flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.605¨
Speed Pro (H273CP 60) X8 Cast Piston STD 020 030 040 060 Speed Pro flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.605¨
Speed Pro (H273CP) X8 Cast Piston STD 020 030 040 060 Speed Pro flat top (set of 8) Rings not included
Use PR2271 piston rings
Compression height 1.605¨
Speed Pro (H654CP 20) X8 Piston STD 020 030 040 060 Speed Pro dish top (set of 8)
Rings not included use RS2271 piston rings
Compression height 1.599¨
Speed Pro (H654CP 30) X8 Piston STD 020 030 040 060 Speed Pro dish top (set of 8)
Rings not included use RS2271 piston rings
Compression height 1.599¨
Speed Pro (H654CP 40) X8 Piston STD 020 030 040 060 Speed Pro dish top (set of 8)
Rings not included use RS2271 piston rings
Compression height 1.599¨
Speed Pro (H654CP 60) X8 Piston STD 020 030 040 060 Speed Pro dish top (set of 8)
Rings not included use RS2271 piston rings
Compression height 1.599¨
Speed Pro (H654CP) X8 Piston STD 020 030 040 060 Speed Pro dish top (set of 8)
Rings not included use RS2271 piston rings
Compression height 1.599¨
Pushrods
Lunati (7004-1) PUSHROD, 5/16 SIGNATURE 6.300 5/16 one piece moly (6.300¨ long .080¨ wall)
Lunati (7006-1) PUSHROD, 5/16 SIGNATURE 6.350 5/16 one piece moly (6.350¨ long .080¨ wall)
Lunati (7008-1) PUSHROD, 5/16 SIGNATURE 6.400 5/16 one piece moly (6.400¨ long .080¨ wall)
Lunati (7010-1) PUSHROD, 5/16 SIGNATURE 6.450 5/16 one piece moly (6.450¨ long .080¨ wall)
Sealed Power (RP-3165) Push Rod Standard (length 6.804¨)
Sealed Power (RP-3170) Push Rod Pushrod 5/16" x 8.383"
Sealed Power (RP-3222R) Push Rod Moly (length 6.776¨)
Sealed Power (RP-3223R) Push Rod Moly (length 6.886¨)
Sealed Power (RP-7001R) Push Rod Moly Pushrod 5/16" x 7.794" One piece Hi-lift.
Rear Main Seals
Durapro (GSHN056D) Rear Main Seal Neoprene (one piece)
Durapro (GSRMS030D) Crankshaft Seal Rear Premium one-piece
ID 92mm x OD 108mm x depth 9.5mm
Fel-Pro (2901) Rear Main Seal Set Performance silicone (suits early 2 piece rear main seal engines)
Fel-Pro (2922 RS) Rear Main Seal Set Performance (Boss 302 engine only)
Fel-Pro (2941) Rear Main Seal Set Performance (suits late engines with 1 piece rear main)
Rocker Arms and Kits
Sealed Power (MR-1751) Rocker Arm Nut 3/8¨ rocker arm nuts (pack of 4)
Sealed Power (MR-1862RS) Rocker Arm Stud Screw in studs 7/16-14 x 3/8-24 (3/8 Ball)
Sealed Power (R-836) Rocker Arm Assembly Kit 3/8¨ (1 smooth tip arm, 1 ball & 1 nut)
Sealed Power (R-879) Rocker Arm Assembly Kit 5/16¨ (1 steel type arm & 1 pivot)
Includes oil deflector in arm
Sump Gasket Sets
Fel-Pro (1809) Oil Pan Gasket Set Performance (rubber)
Fel-Pro (ES 72863) Pan Snap-ups Snap ups 5/16¨ bolts
Fel-Pro (OS 13260 T) Engine Oil Pan Gasket Set One piece rubber oil pan gasket (includes snap-ups for ease of installation) suits early 2 piece rear main seal engines
Timing Cover Seals
Durapro (GSOS0002D) Crankshaft Seal Front Crankshaft Seal Front ID 48 x OD 65.3 x Depth 15mm
Durapro (GSOSS0001D) Crankshaft Seal Front Crankshaft Seal Front ID 48 x OD 65.2 x Depth 12mm
Timing Covers
Edelbrock 4250 SBF Timing Cover, 65-78 289(non K-Code) & 302 69-87 351 Suits 1965-78 289/302 and 1969-87 351 Windsor engines.
Edelbrock 4251 SBF Timing Cover, 86-93 5.0L & 88-Later 351W W/ Reverse Rotation Suits 1986-93 Ford 302 5.0L and 1988-on 351 w/ reverse rotation water pump.
Timing Gasket Sets
Cometic (C5660-020) Timing Cover Gasket Cometic timing cover gasket
Fel-Pro (TCS 45008) Timing Cover Gasket Set Timing cover set (includes front seal) suits 1962-78 models
Tools
Speed Pro (SPB-1) Plastigage Plastigage Blue .004"-.009"
Speed Pro (SPG-1) Plastigage Plastigage Green .001"-.003"
Speed Pro (SPR-1) Plastigage Plastigage Red .002"-.006"
Valve Cover Gaskets
Cometic (C5654-094) .094 Valve Cover Gasket Cometic valve cover gasket (.094¨ thick)
Fel-Pro (1613) Valve Cover Gasket Set Performance (3/16¨ thick)
Fel-Pro (1614) Quick Disconnect Yoke Performance (5/32¨ thick)
Fel-Pro (1615) Valve Cover Gasket Set Performance (3/16¨ thick)
Suits Boss 302 engines only
Fel-Pro (1682) Valve Cover Gasket Set Rubber with steel core (suits SVO Yates cylinder heads)
Fel-Pro (1684) Valve Cover Gasket Set Valve cover gasket set (high performance)
Includes silicone steel shim material with compression limiters
Valve Guides
JCMC (VGFD-17-I) Valve Guide Cast iron (inlet)
JCMC (VG-GM-27-Z) Valve Guide Cast iron (exhaust)
Valve Spring Retainers
Sealed Power (VSR-7000R) Valve Spring Retainer Chrome moly retainers 7° 1.250 OD Single groove
Sealed Power (VSR-7022R) Valve Spring Retainer Chrome moly retainers 10° 1.437 OD Single groove
Valve Springs
Valve Stem Seals
Durapro (GSVSS011D) Valve Stem Seal Set Up to 11/1995
Set of 16 (unleaded)
EndurotecGaskets (GSVSS011E) Valve Stem Seal Up to 11/1995
Set of 16 (unleaded)
Sealed Power (ST-2001) Valve Stem Seal, Positive Teflon in nitrile (machining required)
ID 0.562¨
Sealed Power (ST-2012) Valve Stem Seal, Positive 11/32" Rubber Teflon seal .500" ID
Sealed Power (ST-2017R) Valve Stem Seal, Positive 5/16" All Teflon seal .531" ID
Sealed Power (ST-2018R) Valve Stem Seal, Positive 11/32" All Teflon seal .531" ID
Valves-Exhaust
EVL (TF 44906 WT CF) Stainless Steel Exhaust Valve Stainless steel
Head 1.6¨ x length 5.07¨ x stem 0.344¨ x tip 0.395¨
JCMC (EVFD-127-E (SS)) Exhaust Valve Stainless steel
Head 1.6¨ x length 5.07¨ x stem 0.344¨ x tip 0.395¨
Valves-Inlet
JCMC (EVFD-127-I (SS)) Inlet/Intake Valve Stainless steel
Head 1.94¨ x length 5.09¨ x stem 0.344¨ x tip 0.395¨
Water Pumps
Edelbrock 8840 Water Pump Ford 5.0 V8 Reverse Rotation in Satin Finish Victor Series aluminium water pump
Suits late serpentine belt drive models
Reverse rotation
Satin finish
Edelbrock 8841 Water Pump for Small-Block Ford in Satin Finish Victor series high performance (1965-69 right hand inlet) As cast alloy
Edelbrock 88414 Water Pump for Small-Block Ford in EnduraShine Finish Victor series high performance (1965-69 right hand inlet) EnduraShine alloy
Edelbrock 8842 Water Pump Ford 1965-67 289 cid High performance water pump (suits K code models)
Right hand inlet, no backing plate
GMB (GWF-23A) Water Pump Alloy iron (left hand outlet)
GMB (GWF-42A) Water Pump Cast iron (right hand outlet)
GMB (GWF-93A) Water Pump Up to 8/1998 (suits Falcon EB, ED, EF, EL models only)

Web Store Pty Ltd is a Melbourne based warehouse with thousands of the latest products at great prices. We hand select our range of Australian designed products from only the best local suppliers. We pride ourselves on our customer service and our friendly team are available to assist you through the buying process. When comparing prices know we only sell great quality items and our manufacturing passes strict quality checks before posting.

To ensure a smooth transaction, please follow the payment instructions laid out in the eBay system. If you are new to eBay and unsure how to purchase, please don't hesitate to get in contact with us as our Customer Service team will be happy to assist.

The simplest way to facilitate payment is via Mastercard, Visa, or Paypal via the Checkout process.

Please contact us if yous wish to pay via direct deposit and then we can supply our Account and BSB details.

If paying by bank deposit, please ensure you have your reference of your payment with your eBay user ID so we can identify the payment as yours. Failure to correctly reference your payment will cause a delay in our system which will ultimately delay the shipment of your order.
We check our bank accounts daily so as soon as your payment has cleared, we will start processing your order.

Our stock levels can change at any time. An order is only complete once payment has cleared. To prevent missing out, it's best to pay as soon as possible. Once a payment has cleared, 90% of products are dispatched within 1 business day, however please see our shipping page for estimated shipping times by state. Wedding Wish is not liable for any unidentified payments or delays of delivery due to failure to follow instructions during checkout.

For all payments outside of eBay, please ensure you send us the reference you used, the day and time you paid, and the amount deposited.

As always, if you have any questions, please get in contact with our Customer Service team who are more than happy to help.

We are happy to combine shipping on any orders. Individual listings with combined shipping will automatically calculate on checkout. When buying from multiple listings, please message us prior to purchase to confirm postage rates, be sure to include your postcode for accurate quoting and the items you are after. Express post is available on request for most orders, please note handing times will usually still apply.

Pre-arranged pickup is available from our warehouse in Dingley Village, Victoria. Please note that a handling time will still apply. Please call ahead or email us to ensure item is available for pickup.

POSTAGE & DISPATCH

After payment is cleared 90% of all items are dispatched within two business days, however please see below for estimated delivery times by state. Your item will be sent via courier or Australia Post depending on its size and weight.

Where goods are sent through Australia Post, the buyer may receive a knock on the door or a card in their letterbox indicating their item is available for pickup from their local post office.

A re-delivery fee will be charged to buyers for items that are undeliverable and/or returned due to incorrect delivery address or unsuccessful delivery.

Buyers have the full responsibility to provide us with the correct delivery address and mobile phone number on the checkout page before payment. Any changes to address after checkout will not be considered as valid.

Our staff work tirelessly to ensure customer satisfaction however we understand that on occasion issues do arise. If you have a problem with your purchase please contact us PRIOR to leaving feedback and we will do our best to rectify the situation.

Claims entered directly via this method will be given priority.

The fastest and best way to contact us is through the eBay messaging system. If you contact us out of eBay we may not see your message and our support team will be much slower in dealing with your issue. Thank you for your business!

Copyright (C) 2018 Web Store Pty Ltd. All Rights Reserved