FRAMELESS MIRROR HEATER | 600W | IP44 | MADE IN EU

600W Frameless Infrared Mirror Heater - Wall & Ceiling Heating Panel

Bring modern design and comfortable radiant warmth together with this 600W frameless infrared mirror heater. Featuring an elegant, slightly tinted reflective glass surface, a slim frameless design and advanced far infrared heating technology, this designer electric heating panel offers a stylish alternative to traditional radiators.

Measuring 1185mm x 585mm x 41mm, the far infrared glass heating panel is suitable for both wall and ceiling mounting and can be used in appropriately designed domestic and commercial heating installations.

Key Features & Benefits

How Does a Far Infrared Mirror Heater Work?

A far infrared mirror heater uses electricity to warm its glass heating panel, which then emits infrared radiant energy into the surrounding room.

Unlike conventional convection heating, which primarily warms circulating air, infrared radiant heating transfers warmth to surrounding surfaces and occupants. These surfaces then contribute to the overall room temperature.

This creates comfortable radiant warmth without relying on fans or forced-air circulation.

The panel can be used for primary or supplementary heating where its output is appropriate for the room's calculated heat loss and heating requirements.

Elegant Frameless Mirror Design

This designer infrared mirror heating panel features a reflective front made from 6mm safety glass.

The frameless construction provides a clean, contemporary appearance that complements modern residential and commercial interiors.

The mirrored surface is slightly tinted due to the safety requirements associated with its glass construction. Its appearance may differ from a conventional household mirror.

At just 41mm deep, the heater offers a discreet, space-saving heating solution.

Wall and Ceiling Installation

The 600W frameless infrared glass radiator is suitable for both wall and ceiling mounting, subject to the manufacturer's installation instructions.

Wall-Mounted Infrared Mirror Heater

Install the heater on a suitable wall to create a decorative mirrored heating feature.

Wall installation is ideal for modern living rooms, offices, reception areas and other compatible interior spaces.

Ceiling-Mounted Infrared Heating Panel

The panel can also be installed on a suitable ceiling using the supplied mounting frame and brackets.

The rear mounting frame provides additional support for ceiling installation, allowing radiant warmth to be delivered from above while preserving wall space.

Installation Safety: This panel weighs 21kg and must be securely fixed to a suitable wall or ceiling structure using the correct mounting components. Follow all manufacturer requirements for mounting orientation, structural support, electrical connections and safety clearances.

Built-In Temperature Protection

The heater includes an integrated safety temperature-limiting thermostat.

According to the original product information, this component is designed to prevent the maximum panel temperature from exceeding 90°C.

This safety device is not a substitute for a suitable room thermostat where one is required for regulating indoor temperature.

The heating surface may become hot during operation. Avoid touching the panel while it is heating or cooling down.

IP44 Protection Rating

This 600W infrared mirror heating panel has an IP44 protection rating.

IP44 indicates protection against solid objects larger than 1mm and splashing water from different directions.

Installation in moisture-prone locations must follow the manufacturer's instructions and applicable electrical regulations. IP44 does not mean the heater is waterproof.

Technical Specifications

Specification Details
Product TypeFrameless Infrared Mirror Heating Panel
Heating Output600W
Width1185mm
Height585mm
Depth41mm
Weight21kg
Glass Thickness6mm
Front SurfaceSlightly Tinted Safety Mirror Glass
DesignFrameless with Rear Mounting Frame
Mounting OptionsWall and Ceiling
Mounting ComponentsRear Frame with Mounting Brackets
Voltage230V
Frequency50Hz
Power Cable1.5m
Protection RatingIP44
Temperature LimiterMaximum Panel Temperature 90°C
Warranty2 Years
Country of ManufactureEuropean Union

Where Can This Infrared Mirror Heater Be Used?

The 600W wall and ceiling infrared mirror heater is suitable for appropriately designed residential and commercial heating applications.

How Much Electricity Does a 600W Infrared Heater Use?

A 600W infrared mirror heater consumes approximately 0.6kWh of electricity per hour when operating continuously at full rated power.

Electricity costs depend on your electricity tariff, operating time, thermostat settings and the heating requirements of the room.

Example Electricity Consumption:
  • 1 hour at full power - 0.6kWh
  • 3 hours at full power - 1.8kWh
  • 5 hours at full power - 3.0kWh
  • 8 hours at full power - 4.8kWh

Figures assume continuous operation at 600W. Actual consumption may be lower when suitable temperature controls cycle the heater on and off.

Frequently Asked Questions

What is a frameless infrared mirror heater?

A frameless infrared mirror heater is an electric radiant heating panel with a reflective glass surface and no visible surrounding frame. It combines mirror-style design with electric room heating.

How does a far infrared mirror radiator work?

The heater uses electricity to warm its glass panel, which emits infrared radiant energy towards surrounding surfaces and occupants.

What size is this infrared mirror heater?

The panel measures 1185mm wide, 585mm high and 41mm deep.

Can the heater be wall mounted?

Yes. It is designed for wall mounting using the supplied rear frame and brackets.

Can this infrared mirror heater be ceiling mounted?

Yes. The original product information confirms that ceiling mounting is supported. The rear frame provides additional mounting support.

Is the mirror glass completely clear?

The glass has a slight tint associated with its safety construction. Its appearance may differ from a standard mirror.

Does this infrared heater have overheating protection?

Yes. It has an integrated temperature-limiting thermostat designed to prevent the panel temperature from exceeding 90°C.

What does IP44 mean?

IP44 indicates protection against solid objects larger than 1mm and splashing water. Installation must comply with manufacturer instructions and applicable electrical regulations.

Can a 600W infrared panel heat an entire room?

It may provide primary or supplementary heating depending on room insulation, heat loss, dimensions and the required indoor temperature. A heating calculation is recommended.

How much electricity does a 600W heater use?

At full rated power, the heater consumes approximately 0.6kWh per hour of continuous operation.

What warranty is included?

The heater is advertised with a 2-year warranty, subject to the applicable warranty terms.

Where is the infrared mirror heater manufactured?

According to the original product information, the heater is manufactured in the European Union.

Delivery Information

Next-day delivery is advertised for this product. Actual delivery times depend on order processing, destination and courier availability.

Order Your 600W Frameless Infrared Mirror Heater

Enhance your interior with the 600W frameless infrared mirror heating panel. Featuring 6mm safety glass, a slim reflective finish, IP44 protection and flexible wall or ceiling mounting, this designer electric heater provides comfortable radiant warmth with a contemporary appearance.

600W | 1185 x 585 x 41mm | IP44 | Wall & Ceiling Mounting | Made in EU