Red Dorgard Fire Door Retainer / Holder Doorguard

Product Overview

Dorgard Fire Door Retainer / Holder with FREE SHIPPING and free extended 5 Year Warranty from Safelincs.

The Dorgard Retainer is a safe and legal solution that allows you to hold your fire doors open safely, while automatically closing them in the event of a fire. This allows for better wheelchair access, ventilation and all-round convenience without jeopardising safety or breaking the law.

  • Free extended 5 year warranty from Safelincs
  • Free mainland UK shipping
  • Dorgard now conforms to BS 7273-4 "Standard" category
  • Tested and certified to BS EN 1155:1997 & BS EN 1634
  • Suitable for 120 minute fire doors up to EN power size 7
  • Easy to follow self installation in under five minutes
  • Dorgard is entirely wireless and self contained
  • Floor plate (with or without back stop) available separately to help with heavier doors or slippery floors
  • No need to hard wire into the building's fire alarm system – saves on installation time, costs and mess
  • Battery operated, supplied with 2 x C size alkaline batteries
  • Works with your existing fire alarm system
  • Can hold the door open in any selected angle
  • Dorgard automatically releases the fire door upon hearing the fire alarm
  • Installed in schools, hospitals nursing homes and many other public buildings
  • Manufactured in the UK
  • Smart, unobtrusive design available in a choice of black, white, red and mahogany
  • Easy foot-operated setting and release
  • Automatic night-time release feature
  • Improves access for wheelchair users in line with the Disability Discrimination Act (DDA)

Dorgard has a rubber plunger/stopper which remains in contact with the floor and, unlike magnetic fire door retainers, can hold the door open in any selected position. When a fire alarm sounds, the integral audio-electronic device inside the Dorgard signals the plunger to retract, allowing the fire door close normally (Dorgard will release after approximately 14 seconds). Dorgard is battery powered, so there is no need for complex and expensive wiring into the building's fire alarm system. This means that the Dorgard can be installed and operates alongside any existing fire alarm system currently in place. Please note that your alarm's sound level has to be higher than 65dB at the location of the door to allow the Dorgard to pick up the alarm up. This is also the required alarm sound level for populated areas according to BS 5839-1.

Animation showing how the Dorgard works

Technical Diagram

Diagram showing the Dorgard dimensions
Overall Dorgard height: 205mm
Dorgard main casing height: 153mm
Dorgard width: 195mm
Dorgard depth: 45mm
Plunger / Stopper travel: 20mm
Packed Dorgard kit weight 940g
Casing material ABS
Battery: 2 x C alkaline
Battery life expectancy +12 months

Dorgard Technical Diagram

Technical digram showing the individual parts of the Dorgard unit

Floor Plate

The Dorgard floor plate (available separately) is designed for use with an installed Dorgard and is fitted to the floor using 4 screws.

Fire doors weighing more than 120Kg, which have a closing force in excess of 120nm (that is a force of about 15kg, 800mm from the hinge) must have the floorplate installed in combination with the Dorgard unit. Dorgard can hold a fire door open safely without the floor plate installation if the fire doors weight and closing force are less than that above.

Installing a Dorgard floorplate is recommended when:

  • Your fire door has a powerful overhead door closer and the fire door tends to creep closed even with a Dorgard fitted.
  • The floor is slippery or has a very smooth surface and the fire door tends to creep closed even with a Dorgard fitted.

Technical Data

Product Code FCDG01RD
Weight 0.94kg
Warranty 5 Years
Case Material ABS
Battery Type 2 x C Size Alkaline
Expected Battery Life Minimum One Year
Sensitivity 65dB
Dimensions (Case Only)
Height (mm) 153
Width (mm) 195
Depth (mm) 45
Dimensions (Including Plunger and Foot) 205