New NKK Circuit Board Mounted Key Lock Switches, Keyed Alike, Part Number SK14EG13-RO, or SK14EG13-R0, or SK-14 or SK14.  Each bid quantity is for a Lot of Two (2) Switches with Four (4) Keys and Two (2) PVC Cleaning Boots.  You may bid / buy any number of lots, up to the total quantity available above.

These were purchased at an industrial liquidation recently, and they were brand new in bulk factory boxes.  We repackaged them in heavy Ziplok bags.  They are quality little switches with smooth movement and light but easily perceived clicks between positions.  No, you can't use them to control your air compressor, but they would be great for light amperage electronic applications.  They have three key positions, and the key is prevented from removal in all positions except the Center position.  These are Keyed Alike, which means that any of the keys will fit any of the locks.  Contacts are SP3T (single pole, triple throw). 

The manufacturer's datasheet (medium PDF file) is located at:

http://www.nkkswitches.com/pdf/ SK_PCBmountMiniature.pdf

According to the manufacturer:

Distinctive Characteristics

Sealed body construction plus disposable boot protect contacts and allow automated processing.

Molded-in terminals seal out flux, solvents, and other contaminants.

Short body size for space-saving, behind panel dimensions. Detent mechanism, with its spring-operated steel ball, gives crisp, positive action for accurate switch setting.

Bifurcated, self-wiping contact mechanism provides unequalled logic-level reliability and smoother, positive detent actuation.

Crimped bracket legs ensure secure PCB mounting and prevent dislodging during automated wave soldering.

.100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing.

Electrical Capacity (Resistive Load)

Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) See Supplement section to find explanation of operating range

Other Ratings

Contact Resistance: 80 milliohms maximum
Insulation Resistance: 100 megohms minimum @ 500V DC
Dielectric Strength: 500V AC minimum for 1 minute minimum
Mechanical Life: 30,000 cycles minimum
Electrical Life: 10,000 cycles minimum Nominal Operating Torque: .026Nm (.234 lb•in) for momentary action models .020Nm (.182 lb•in) for maintained action models Contact Timing: Break-before-make
Angle of Throw: 90° for 2-position & 45° for 3-position

Materials & Finishes

Boot: Polyvinyl chloride Key: Brass alloy with bright nickel plating; brass alloy with bright nickel plating & ABS resin handle Tumbler Barrel: Polyacetal Bushing: Zinc alloy with nickel plating Bracket: Steel with tin plating Base: Glass fiber reinforced polyamide Movable Contactor: Beryllium copper with gold plating
Stationary Contacts: Copper with gold plating
Terminals: Brass with tin plating

Environmental Data

Operating Temperature Range: –25°C through +70°C (–13°F through +158°F)
Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)

Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)