BEFORE BIDDING make sure to READ all text below, look at all the pictures, and review shipping costs and return policy. Thank you!

"Vintage Relic pre-wired upgrade kit (Orange Drop caps) fits / compatible with Gibson Les Paul guitars. New. A very economical way to improve the tone of your LP! Direct replacement for your non-Historic Les Paul (Standard, Traditional, Classic, Studio, Deluxe, Custom, etc). Hear what you've been missing from your humbuckers or P-90s!

  • 4 USA CTS 500k XL 10% Tolerance long shaft (brass) audio taper pots (2 volume, 2 tone). Top of the line CTS pots with tight tolerances and measuring ~550k. We do measure all pots and use higher values for the volume positions.

  • 2 Orange Drop .022 uF model 715P tone capacitors. Very nice caps!

  • 50's style wiring.

  • Extra nut for each pot to properly set the height of the shaft on top of the body.

  • Wiring diagram included.

  • Ask if you need it wired for LEFT HANDED layout (note: we do not have reverse taper pots).
Please note: this kit is designed for Gibson Les Pauls that use long shaft pots (most all non-Historic Reissue Gibson Les Pauls made since 1977). If you have a Historic or vintage  (pre-1978) Gibson, see our other auction. Also, CTS pots require a 3/8" hole (in the top of your guitar); most USA made guitars are drilled this way, however imported guitars often are not.

Distance between the components (center to center); if you need different spacing, let us know:

neck volume to neck tone = 2.25"
neck volume to bridge volume = 2.0"
bridge volume to bridge tone = 2.25"
bridge tone to neck tone = 2.0"
neck volume to bridge tone (diagonal) = 2.1"
"
Above text and pictures copyright Vintage Relic. All rights reserved.

POT SPECS: 
Can Size = 15/16 in. radius X 3/8 in. height
Bushing Threads = 3/8-32 
Bushing Height = 3/4 in. 
Shaft Type - split 
Shaft Diameter = .238 in (6.3mm) 
Spline Count = 24 (NOT metric) for USA knobs
Shaft Length - 3/8 in. 
Hole size requirement = 3/8 in. 
Value = ~550K Ohms