5-layer insulated · double waterproof zips · blackout privacy
5 layer INSULATED | UV50+ WATERPROOF | 2 zips ONE EACH SIDE | 50 mm FIXING SURROUND |
ZIPdoûr is an insulated shower door made for campervans, 4x4 overlanders and RVs. It handles constant vibration, mud, sand, damp and temperature swings, and gives you reliable privacy, waterproof protection and warmth.
Double waterproof zips make it quick to get in and out. Zip up, fold, and clip at the top for a full walk-through, then fold away when you don't need it. The blackout outer face keeps you private at busy campsites and in bright daylight.
| 01 | UV50+ waterproof polyester inside face: stain resistant and easy to clean. |
| 02 | Pure aluminium radiant heat barrier. |
| 03 | 5 mm automotive-grade insulation foam. |
| 04 | Second aluminium radiant heat barrier, which also reduces noise. |
| 05 | UV50+ waterproof black polyester outer face for blackout privacy. |
Sizes are based on your doorway cut-out opening. Choose yours from the drop-down menu at the top of this listing.
| Widths (zip to zip) | |
| 500 mm opening | Total width 620 mm, fits up to 540 mm |
| 600 mm opening | Total width 720 mm, fits up to 640 mm |
| 700 mm opening | Total width 820 mm, fits up to 740 mm |
| 800 mm opening | Total width 920 mm, fits up to 840 mm |
| 900 mm opening | Total width 1020 mm, fits up to 940 mm |
| Heights | |
| 1700 mm opening | 1750 mm total height |
| 1800 mm opening | 1850 mm total height |
| 1900 mm opening | 1950 mm total height |
Not every width is available in every height. The drop-down shows what's in stock.
| ■ | Height: measure from the top edge to the bottom edge of your doorway cut-out. |
| ■ | Width: measure the walk-through opening from side to side. |
| ■ | The door fits on the inside of the shower room, overlapping the opening, with a 50 mm fixing surround on both sides and the top. |
| ■ | The 10 mm zip area sits inside the opening, so the zip pull is reachable from both sides. |
| ■ | You have up to 40 mm tolerance on width, e.g. a 600 mm door suits openings up to 640 mm. |
| ■ | Top tip: the bottom of the door should sit just below the bottom of the opening. |
| 01 | Hold the door inside the shower room, overlapping the opening. |
| 02 | Fix the 50 mm surround to the wall with the 10 mm button screws provided, on both sides and the top. |
| 03 | Press the poppers onto the buttons, zip up and you're done. |
| ■ | ZIPdoûr insulated shower door |
| ■ | Double waterproof zip system |
| ■ | Stainless steel fittings and 10 mm button screws |
| ■ | Fitting and care instructions |
| ■ | Wipe the UV50+ fabric with a damp cloth after use. |
| ■ | Check the zips and fixing points from time to time. |