Genuine LMR®-400 Assembly – N Type Male Connectors
This cable assembly has N type Male connectors installed on each end.
Genuine LMR®-400 Flexible Low Loss Communications Coaxial cable assembly in various lengths - manufactured by Times Microwave Systems and available from McGill Microwave Systems Limited – Authorised Distributor and Assembly House for all Times Microwave Systems products.
Manufactured by Times Microwave Systems™ and officially distributed in Europe by McGill Microwave Systems Ltd.
Important Alert: There are many "fake" or "alternative" attempted copies of the Times Microwave Systems LMR® High Performance Coaxial Cable and Connector range - buy only 100% genuine Times Microwave Systems Products - available only here on eBay from an official UK Authorised Distributor.
Applications
LMR®-400 Flexible Low Loss Communications Coaxial Cable is ideal for:
- Drop-in replacement with up to 40% Lower Attenuation for RG-8, RG 213, RG 214 and 9913 Air-Dielectric type Cables
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMAX, SCADA, Mobile Antennas, Sat Comms, Radio Amateur, PMR 2 way Radio) requiring an easily routed, low loss high performance RF cable
- 3G or 4G repeaters
- Radio antennas or receivers
Attenuation
| Attenuation — dB per 100m | |
| Frequency | Attenuation |
| 30 MHz | 2.2 dB |
| 50 MHz | 2.9 dB |
| 150 MHz | 5.0 dB |
| 220 MHz | 6.1 dB |
| 450 MHz | 8.9 dB |
| 900 MHz | 12.8 dB |
| 1500 MHz | 16.8 dB |
| 2500 MHz | 22.2 dB |
Construction
| Construction | ||
| Component | Material | Diameter |
| Inner Conductor | Solid BCCAI | 2.74 mm |
| Dielectric | Foam PE | 7.24 mm |
| Outer Conductor | Aluminium tape | 7.39 mm |
| Overall Braid | Tinned copper | 8.13 mm |
| Jacket | Black PE | 10.29 mm |
Mechanical & Environmental
| Mechanical Specifications | |
| Property | Value |
| Bend Radius, installation | 25.4 mm |
| Bend Radius, repeated | 101.6 mm |
| Bending Moment | 0.68 Nm |
| Weight | 0.10 kg/m |
| Tensile Strength | 72.6 kg |
| Flat Plate Crush | 0.71 kg/mm |
| Temperature range | -40⁰C to +85⁰C |
Connectors
This cable assembly has N type Male connectors installed on each end.
All assemblies are custom made to order – we can supply and assemble any size cable and connectors. If you can't find what you're looking for, please message us and we'll be happy to help with your requirements.
LMR® is a registered trademark of Times Microwave Systems