Hitachi HiKOKI DH36DPE(NN) Cordless rotary hammer drill 36V main unit only F/S

Drilling capacity (without dust collection system) [Concrete]: 3.4~28mm [Ironworking]: 13mm [Woodworking]: 32mm [Core bit]: 25~50mm [Diamond core bit]: 65mm
Drilling capacity (with dust collection system installed) [Concrete]: 4.3~20mm
/ No-load rotation rate min-1 (times/min) [NORMAL mode]: 0~950 [LOW mode]: 0~700 / Full load blow number min-1 (strike/min) [NORMAL mode]: 0~4,300 [LOW mode]: 0~3,170
/ Vibration 3-axis composite value when the dust collection system is not installed: [Rotation + strike] 12.4m/s [Strike] 11.0m/s / Vibration 3-axis composite value when the dust collection system is installed [Rotation + Impact] 10.3m/s
Mass (when the storage battery BSL36A18 is attached): [When the side handle is attached] 3.6kg / [When the side handle and dust collection system is attached] 4.7kg
Brand : HiKOKI
Power Supply : Battery Powered
Maximum Rotation Speed : 950 Revolutions per minute
Voltage : 36.0
Maximum Chuck Size : 65mm Color
: Dust Collection System
Sold Separately Included Components : Depth Gauge Side Handle Cap (Attached to the Main Unit)
Features : Cordless
Product Dimensions : 22.9L x 6W x 12.2H cm
Item Weight : 3.5kg
Light and slim gun handle & fastest in class*1 drilling speed! Compatible with new motorless cyclone dust collection units. It
is significantly lighter and slimmer than before, and the balance when worn has improved.
In addition, the cyclone separation system and HEPA filter make it easier to reduce suction power than before, and a clean exhaust dust collection system is realized.
*Conventional dust collection units (0037-0104) cannot be installed.
*Equipped with a low-vibration mechanism.
Reduced burden during work.
It has a two-speed switching function that allows you to work according to the material.
Equipped with a high-brightness and bright LED light Equipped with an "auto-stop function" that is convenient for continuous drilling.
It remembers the drilling time and automatically stops the motor at the time it remembers.
With reactive force control (RFC) for sudden loads. This reduces the
phenomenon that the slip clutch is activated when the tip is suddenly loaded, or that the controller built into the tool body stops the motor and shakes the tool body.
*It may not work due to working conditions, conditions, etc., or it may not be able to fully demonstrate its performance.
When working, be careful to install and fix the material and hold the tool body securely.
**1.As of January 2021.
Domestic power tool manufacturers (according to our research)

Brand introduction
▽Products with initial repair warranty special feature ▽Professional cordless power tools special feature ▽Accessories special feature ▽Cleaner special feature ▽Gardening special feature ▽Cold and hot storage special feature ▽Battery and charger special feature ▽DIY special feature
HiKOKI is a global manufacturer of power tools and air tools from Japan with a history of more than 70 years. It is a power tool brand developed by Koki Holdings.
With the solid technology and development capabilities we have cultivated since our founding, we will continue to create and deliver products that customers can choose "what they wanted".
"If you choose, HiKOKI" Everything is for the customer.
Visit Store Visit Store Access Store Manufacturer's Description
Dust Collection System (DH36DPF) Specifications
DH36DPE: 3.5kg DH36DPF: 4.5kg 200g lighter than our conventional product DH36DPA *When attached, BSL36A18 no side handle
Comparison of drilling speed (approximate) *2 Taper diameter 12.5mm (application: metal anchor pilot hole) *1: As of January 2021.
At a domestic power tool manufacturer (according to our research) (36V cordless rotary hammer drill) *2: Figures are reference values (varies depending on materials and conditions) Equipped with
a dynamic vibration absorber that absorbs vibration from the main unit to reduce the burden on the operator.
By pressing the switch and reducing the number of revolutions and strokes, it is easier to drill holes in brittle materials.
Equipped with an "auto-stop function" that is convenient for continuous drilling.
It remembers the drilling time and automatically stops the motor at the time it remembers. *Note: This is
a memorization of the drilling time and does not guarantee the drilling depth. The
drilling depth may not be consistent due to the posture during work, the pressing force of the aircraft, and the difference or variation of the workpiece material.
To reduce the variation in drilling depth, use a depth gauge together. This reduces the
phenomenon that the slip clutch is activated when the tip is suddenly loaded, or that the controller built into the tool body stops the motor and shakes the tool body.
*Note: It may not operate or fully demonstrate its performance depending on the working situation or conditions.
When working, be careful to install and fix the material and hold the tool body securely. It can
also be used as a DH36DPF by attaching a dust collection system (sold separately) to the DH36DPE.
The suction power is less likely to drop, resulting in a clean exhaust. A
two-cylinder cyclone is used to centrifuge the dust.
Comparison of dust collection performance (approximate) * When the diameter is 14.5mm and the depth is 50mm, when working sideways *Figures are reference values (depending on the material and conditions) The
HEPA filter catches fine dust and discharges clean air. The
dust collection system can be attached and detached while the bit is attached.
Because of the motorless dust collection system, it is light and easy to handle. It
is slim even when installed with a dust collection system, making it ideal for working in confined spaces.
The center of gravity is on the pressing line, which reduces the strain on upward work.
/ Equipped with high-brightness LED light *When using the dust collection system, the bit cannot be irradiated.


Japanese electrical products typically operate at 100V input voltage (Type A plug). If the voltage is not specified in the description or Item Specifics, the product may only support 100V input. A voltage converter may be required to use 100V devices in your country. Please contact the seller for accurate input voltage details.