Genuine LMR®-600-Lightweight
Flexible Low Loss Communications Coaxial cable in various lengths - manufactured by Times Microwave Systems and available from McGill Microwave Systems Limited – Authorised Distributor and Assembly House for all Times Microwave Systems products.
Manufactured by Times Microwave Systems(TM) and officially distributed in Europe by McGill Microwave Systems Ltd
Important Alert: There are many "fake" or "alternative" attempted copies of the Times Microwave Systems LMR® High Performance Coaxial Cable and Connector range - buy only 100% genuine Times Microwave Systems Products - available only here on eBay from an official UK Authorised Distributor.
LMR®-LW is a lightweight low loss coaxial cable that employs an aluminium braid shield instead of the traditional tinned copper shield. LMR-LW has been designed and engineered with a combination of electrical, physical and mechanical properties that reduce weight and cost.
LMR®-600-Lightweight is ideal for
- Drop-in replacement with up to 40% Lower Attenuation for RG-8, RG 213, RG 214 and 9913 Air-Dielectric type Cables
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMAX, SCADA, Mobile Antennas, Sat Comms, Radio Amateur, PMR 2 way Radio) requiring an easily routed, low loss high performance RF cable
- 3G or 4G repeaters
- Radio antennas or receivers
Attenuation
| Attenuation — dB per 100m | |
| Frequency | Attenuation |
| 30 MHz | 1.4 dB |
| 50 MHz | 1.8 dB |
| 150 MHz | 3.2 dB |
| 220 MHz | 3.9 dB |
| 450 MHz | 5.6 dB |
| 900 MHz | 8.2 dB |
| 1500 MHz | 10.9 dB |
| 2500 MHz | 14.5 dB |
Construction
| Construction | ||
| Component | Material | Diameter |
| Inner Conductor | Solid BCCAl | 4.47 mm |
| Dielectric | Foam PE | 11.56 mm |
| Outer Conductor | Aluminium tape | 11.71 mm |
| Overall Braid | Tinned copper | 12.45 mm |
| Jacket | Black PE | 14.99 mm |
Mechanical & Environmental
| Mechanical Specifications | |
| Property | Value |
| Bend Radius, installation | 38.1 mm |
| Bend Radius, repeated | 152.4 mm |
| Bending Moment | 3.73 Nm |
| Weight | 0.147 kg/m |
| Tensile Strength | 118 kg |
| Flat Plate Crush | 1.07 kg/mm |
| Temperature range | -40⁰C to +85⁰C |
Compatible connectors
This cable can be installed with the following connectors:
LMR-600 'TC' (solder-on centre pin) Connectors
TC-600-716FC, TC-600-716MC, TC-600-716M-X, TC-600-716M-RA-D, TC-600-HNMC, TC-600-LCM, TC-600-NF-X, TC-600-NF-BH, TC-600-NFC-BH, TC-600-NMC-2-D, TC-600-NMC, TC-600-NMH-X, TC-600-NMH-75/50, TC-600-NMH-RA-D, TC-600-QDSM, TC-600-TM-X, TC-600-TF-X, TC-600-TF-RP, TC-600-TM-RP, TC-600-TM-RA-D, TC-600-UMC, TR-600, TC-600-4310M-X, CR-600-X
LMR-600 'EZ' Install (non-solder) Connectors
EZ-600-4310M-X, EZ-600-4310M-RA-X, EZ-600-716F-X, EZ-600-716M-X, EZ-600-716M-RA-X, EZ-600-78 EIA, EZ-600-FM-75-X, EZ-600-FMH-75, EZ-600-NF-BH-X, EZ-600-NF-BH, EZ-600-NF-X, EZ-600-NMH-X, EZ-600-NM-75, EZ-600-NMC-2-D, EZ-600-NMK, EZ-600-NMH-RA-X, EZ-600-QNF-X, EZ-600-QNM-X, EZ-600-QNM-RA-X, EZ-600-SM-X, EZ-600-TF-X, EZ-600-TF-BH-X, EZ-600-TF-RP, EZ-600-TM-X, EZ-600-TM-RP, EZ-600-UM, EZ-600-UM-X, EZ-600-UM-RA-X, CR-600-X
LMR® is a registered trademark of Times Microwave Systems
