#####
-Check the voltage of the power supply-
Please check the power supply voltage in the product specifications.
In most cases, the power supply voltage is compatible with AC 100V. In that case, if the power supply voltage in your area is 100V to 110V, there should be no problem. However, please note that if the power supply voltage is 120V or higher, you will need a step-down transformer.
-Item Condition-
Normal working condition.
■ Condition Details:
・No visible damage.
・Left and right speaker output OK.
・Each input source selection and amplification OK.
・Dubbing selection OK.
・Balance, bass, and treble controls OK.
・Stereo/Mono mode selection OK.
・5 input sources available (MM-Phono / Aux / Tuner / Tape 2).
・Headphone output OK.
・Speaker output 2-system selection (A or B / A & B) OK.
-Product Specifications-
Model: Integrated Amplifier
Power Amplifier Section
■ Circuit System: Differential amplification, all-stage direct-coupled pure complementary OCL circuit
■ Dynamic Output (IHF): 140W (70W + 70W, 8 ohms)
■ Rated Output (Both channels driven, continuous sine wave):
・45W + 45W (8 ohms, 20Hz - 20kHz)
・55W + 55W (4 ohms, 1kHz)
■ Total Harmonic Distortion (Aux In → SP Out): 0.08% or less (at rated output)
■ Intermodulation Distortion (60Hz : 7kHz = 4:1): 0.1% or less (at rated output, Aux In → SP Out)
■ Power Bandwidth (IHF, both channels driven): 5Hz - 50kHz
■ Output Impedance: 0.16 ohms or less
■ Terminals:
・Speaker A or B: 4 ohms - 16 ohms
・Speaker A + B: 8 ohms - 16 ohms
・Headphone Jack
Preamplifier Section
■ Input Sensitivity / Impedance:
・Phono: 2.5mVrms / 50k ohms
・Tuner, Aux, Tape 1, 2: 150mVrms / 85k ohms
■ Maximum Allowable Phono Input (Phono → Rec Out): 150mVrms or higher (1kHz)
■ Total Harmonic Distortion (1kHz, Phono → Rec Out):
・0.008% or less (at 3Vrms output)
・0.1% or less (at maximum output)
■ RIAA Deviation: 20Hz - 20kHz ±0.3dB
■ Output Level / Impedance (Rec Out): 150mVrms / 50k ohms or higher
■ Tone Control: Bass ±10dB (50Hz), Treble ±10dB (20kHz)
PCC Section
■ Maximum Allowable Input: 9Vrms
■ Phono Crosstalk After Cancellation: Approx. -40dB
■ Frequency Response: 10Hz - 50kHz (+0, -1dB)
General & Overall Performance
■ Overall Frequency Response: 20Hz - 20kHz ±0.75dB
■ S/N Ratio (IHF, A-network, input shorted):
・Phono: 75dB or higher
・Tuner, Aux, Tape 1, 2: 95dB or higher
■ Crosstalk (Phono → SP Out):
・-75dB or lower (20Hz - 1kHz)
・-56dB or lower (20kHz)
■ AC Outlets:
・Switched: 2 lines (Total capacity: 150W)
・Unswitched: 1 line (Capacity: 100W)
■ Power Supply Voltage: AC 100V, 50Hz/60Hz
■ Power Consumption: 125W (Electrical Appliance and Material Safety Law standard)
■ Outer Dimensions: Width 430 x Height 142.5 x Depth 310 mm
■ Weight: Approx. 10.5 kg
#####
Payment Information
We only accept PayPal payments.
Please pay within 5 days after the auction closed.
Shipping & Handling
Generally, all items will be shipped within 10 business days after purchase confirmation. There may be exceptions, such as pre-order items, and in such cases we will endeavour to notify you in advance.
Return Policy
We accept returns within 30 days of the item’s arrival, provided the item remains unopened.
Customs and Duties
For buyers in the United States:
The following applies to items under $2500. Items over $2500 will be subject to customs duties, just like buyers outside the US.
Import duties and taxes are included in the item price or shipping cost.
Items shipped to the U.S. are sent under the Delivered Duty Paid (DDP) method, which means all import-related charges are prepaid.
You don’t need to pay any additional fees when your order arrives.
For buyers outside the United States:
Import duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer’s responsibility.
Please check with your country’s customs office to determine what these additional costs will be before bidding or buying.
I do not mark merchandise values below value or mark items as gifts International government regulations prohibit such behavior.