Product Specification
DC Resistance (approx.):
Neck humbucker: 7.5K (3.75K split-coil)
Center single-coil pickup: 7.5K (3.75K split-coil)
Bridge humbucker: 15K (7.5K split-coil)
Hole Pitch:
Neck (N): 50mm
Middle (M): 50mm
Bridge (B): 52mm
Humbucking pickup 4-core wire description: black wire is the hot end, green wire is the ground wire, red and white wires are used for the splitter coil
Material: PVC pickup guard and copper coil pickups
Weight: 700g per set
Tip: Please check the pickguard size chart carefully before purchasing to make sure the hole pattern is compatible with your pickups, otherwise you may need to make necessary adjustments.

Included Accessories
1 x 3-ply guitar pickguard
3 Alnico 5 humbucker pickups
1 5-position switch
1 Enhanced Toggle Switch
3 potentiometers (1 volume, 2 tone, copper shaft)
4 single-cut toggle switches
1 x 400V/200V capacitor
1 output jack
11 screws
Extra Functions
In addition to the original functions, two single-cut toggle switches bring new functions:
When the multi-function toggle switch (first toggle) is on, the neck pickup activates regardless of the position the 5-position switch is set to. For example, toggle on + 5-position switch in bridge position = neck and bridge pickups work simultaneously.
The bridge pickup has a single-cut (push-pull) toggle switch (second toggle). Turning on the single-cut toggle switch gives a different tone, and the humbucker changes to a single-coil pickup tone, which is a very powerful feature.