15101-104 9" x 12" Standard Trim Tab Kit Double Rocker Switch for Boat 16'-25'



moother, Drier, Faster, Safer: 15101-104 Trim Tabs operate independently of each other to provide optimal performance by redirecting water flow at the transom of the boat. Designed to improve the overall attitude of the boat, which improved driving performance, reduced drag, increased speed and improved fuel efficiency.


Easy To Operate, Instant Response: The actuators are electromechanical and respond immediately when the switch is touched, allowing for precise control. The switch is based on the bow position, the left side of the switch controls the starboard tab, and the right side of the switch controls the port tab.


Safety Instruction: Recommended boat size 16' - 25'. Since all boats have different weights, lengths, speeds, and performance, it takes practice to understand how a boat will react with a trim tab installed. When making adjustments with the trim tabs, use short momentary taps of the switch.


Professionally Manufactured: Size 9"L x 12"W, minimum transom height 14". Blades are constructed of 12 gauge, 304 stainless steel with a 5/8" flared trailing edge. 12-Volt actuators 2 with 6 ft leads. 20 ft actuator extension harnesses 2 with waterproof plug-and-play Deutsch connectors. Comes with stainless steel mounting hardware and installation instructions to help you install easily.


Package Included:

(1) Switch Kit - Choose Double Rocker, NEW Standard Integrated.
(2) 12-gauge stainless steel standard finish blades.
(2) 15054-001 actuators with leads and connectors.
(2) 30133-103 actuator extension wiring harnesses.
(2) 15085-001 upper mounting brackets with gland seal.
(2) 50014-001 lower mounting brackets.




Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.


1.Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.  

2.All of the items are shipped from our Warehouse in USA.



1. Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 60 days after the date of package arrived. No Claim will be accept after 60 days.

2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.


If you have any questions, please feel free to email our service specialists 24 Hours a Day, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.

Please note that our product is an aftermarket product (non-OEM). The parts we offer in this listing are an O.E. alternative; they are not produced by O.E. Manufacturers. All names, numbers, symbols and descriptions are used for reference purposes only. If you mind, please do not place an order.


Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.

moother, Drier, Faster, Safer: 15101-104 Trim Tabs operate independently of each other to provide optimal performance by redirecting water flow at the transom of the boat. Designed to improve the overall attitude of the boat, which improved driving performance, reduced drag, increased speed and improved fuel efficiency.


Easy To Operate, Instant Response: The actuators are electromechanical and respond immediately when the switch is touched, allowing for precise control. The switch is based on the bow position, the left side of the switch controls the starboard tab, and the right side of the switch controls the port tab.


Safety Instruction: Recommended boat size 16' - 25'. Since all boats have different weights, lengths, speeds, and performance, it takes practice to understand how a boat will react with a trim tab installed. When making adjustments with the trim tabs, use short momentary taps of the switch.


Professionally Manufactured: Size 9"L x 12"W, minimum transom height 14". Blades are constructed of 12 gauge, 304 stainless steel with a 5/8" flared trailing edge. 12-Volt actuators 2 with 6 ft leads. 20 ft actuator extension harnesses 2 with waterproof plug-and-play Deutsch connectors. Comes with stainless steel mounting hardware and installation instructions to help you install easily.


Package Included:

(1) Switch Kit - Choose Double Rocker, NEW Standard Integrated.
(2) 12-gauge stainless steel standard finish blades.
(2) 15054-001 actuators with leads and connectors.
(2) 30133-103 actuator extension wiring harnesses.
(2) 15085-001 upper mounting brackets with gland seal.
(2) 50014-001 lower mounting brackets.

ibay365