Brand New !

~ Unused from job site ~ 



DMC-4K-C-HDCP2

HDBaseT® Certified 4K DigitalMedia 8G+® Input Card for DM® Switchers





OVERVIEW:

The DMC-4K-C-HDCP2 is an input card designed for use with any card-based Crestron® DigitalMedia™ Switcher. It provides one DM 8G+® input, with complementary HDMI® pass-through and analog audio outputs. Using a single CAT type twisted pair cable, the DM 8G+ input enables the connection of a DM 8G+ transmitter, the output of another DM® switcher, or an HDBaseT® certified source.[1]




SPECS:

Maximum Cable Lengths
 
 
 
Resolution 

Cable Type

DM-CBL-ULTRA

 DigitalMedia™ Ultra Cable 		DM-CBL-8G

 DigitalMedia 8G™ Cable 
 CAT5e
 (or better) [1]
1080p60 Full HD


  330 ft (100 m)
 330 ft (100 m)		 330 ft (100 m)
1920x1200 WUXGA

1600x1200 UXGA
2048x1080 DCI 2K
2560x1440 WQHD 230 ft (70 m) 165 ft (50 m)
2560x1600 WQXGA
3840x2160 4K UHD
4096x2160 DCI 4K

Video

 
Input Signal Types
DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K
 
Output Signal Types		HDMI w/Deep Color, 3D, & 4K (DVI compatible [5])
  
Maximum Resolutions
 
Scan
Type 		ResolutionFrame
Rate 		Color
Sampling 		Color
Depth 

Progressive		4096x2160 DCI 4K
&
3840x2160 4K UHD		24 Hz4:4:430 bit
30 Hz4:4:424 bit
30 Hz4:2:236 bit
60 Hz4:2:024 bit

2560x1600 WQXGA
60 Hz
4:4:4
36 bit

1920x1080 HD 1080p
60 Hz
4:4:4
36 bit

Interlaced
1920x1080 HD 1080i
30 Hz
4:4:4
36 bit
 
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz

Audio

 
Input Signal Types		DM 8G+, HDBaseT
 
Output Signal Types		HDMI (multichannel pass-through from input), analog stereo (2-channel pass-through from input [2])
 
Digital Formats
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
 
Analog Format		Stereo 2-channel
 
Digital-To-Analog Conversion		24-bit 48 kHz
 Analog Performance
Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB, 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >90 dB
 
Analog Volume Adjustment
-80 to 0 dB

Communications
 
DigitalMedia
DM 8G+, HDCP 2.2, EDID, CEC, PoDM, PoDM+, PoDM++, Ethernet
 
HDBaseT
HDCP 2.2, EDID, CEC, RS-232, PoE, PoE+, Ethernet
 
HDMI
HDCP 2.2, EDID, CEC
 
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDBaseT and HDMI devices and a control system

Connectors
 HDMI OUT
(1) 19-pin Type A HDMI female;
HDMI digital video/audio output (DVI compatible [5])
 DM IN

(1) 8-pin RJ45 female, shielded;
DM 8G+ input, HDBaseT compliant;
PoDM PSE port (HDBaseT PoE compatible) [3];
Connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]
 POE IN

(1) 8-pin RJ45 female;
PoE/PoDM input;
Connects to an IEEE 802.3af or 802.3at compliant PoDM or PoE PSE (Power Sourcing Equipment) to enable PoDM or HDBaseT PoE power sourcing via the DM IN port. Compatible with PoE+, PoDM+, and PoDM++. Supports Crestron models DM-PSU-8, DM-PSU-16, DM-PSU-ULTRA-MIDSPAN, and CEN-SWPOE-16 [3]
 AUDIO OUT

(2) RCA female;
Unbalanced stereo line-level audio output [2];
Output Impedance: 100 Ohms nominal;
Maximum Output Level: 2 Vrms

Indicators

 
DM IN
(2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence

Construction
 
Plug-in card, occupies (1) DM switcher input card slot, includes metal faceplate w/black finish