This Cable assembly has N type Male and Female connectors installed LDF4-50A, HELIAX® Low Density Foam Premium Coaxial Cable, Corrugated Copper, 1/2 in, black PE jacket (Halogen free jacketing) |
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMAX, SCADA, Mobile Antennas, Sat Comms , Radio Amateur ,PMR 2 way Radio) requiring an easily routed, low loss high performance RF cable
- 3G or 4G repeaters
- Radio antennas or receivers
General Specifications
Flexibility Standard
Jacket Color Black
Performance Note Attenuation values typical, guaranteed within 5%
Dimensions
Diameter Over Dielectric 12.954 mm | 0.51 in
Diameter Over Jacket 15.875 mm | 0.625 in
Inner Conductor OD 4.826 mm | 0.19 in
Outer Conductor OD 13.97 mm | 0.55 in
Nominal Size 1/2 in
Electrical Specifications
Cable Impedance 50 ohm ±1 ohm
Capacitance 75.8 pF/m | 23.104 pF/ft
dc Resistance, Inner Conductor 1.48 ohms/km | 0.451 ohms/kft
dc Resistance, Outer Conductor 2.69 ohms/km | 0.82 ohms/kft
dc Test Voltage 4000 V
Inductance 0.19 μH/m | 0.058 μH/ft
Insulation Resistance 100000 MOhms-km
Jacket Spark Test Voltage (rms) 8000 V
Operating Frequency Band 1 – 8800 MHz
Peak Power 40 kW
Velocity 88 %
Material Specifications
Dielectric Material Foam PE
Jacket Material PE
Inner Conductor Material Copper-clad aluminum wire
Outer Conductor Material Corrugated copper
Mechanical Specifications
Minimum Bend Radius, multiple Bends 127 mm | 5 in
Minimum Bend Radius, single Bend 50.8 mm | 2 in
Number of Bends, minimum 15
Number of Bends, typical 50
Tensile Strength 113 kg | 249.122 lb
Bending Moment 3.8 N-m | 33.633 in lb
Flat Plate Crush Strength 2 kg/mm | 111.995 lb/in
Environmental Specifications
Installation temperature -40 °C to +60 °C (-40 °F to +140 °F)
Operating Temperature -55 °C to +85 °C (-67 °F to +185 °F)
Storage Temperature -70 °C to +85 °C (-94 °F to +185 °F)
Attenuation, Ambient Temperature 68 °F | 20 °C
Average Power, Ambient Temperature 104 °F | 40 °C
Average Power, Inner Conductor Temperature 212 °F | 100 °C
Packaging and Weights
Cable weight 0.22 kg/m | 0.148 lb/ft
Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision
ROHS Compliant
UK-ROHS Compliant
This cable assembly has N type Male and Female Connectors installed.
This Cable assembly has N type Male and Female connectors installed LDF4-50A, HELIAX® Low Density Foam Premium Coaxial Cable, Corrugated Copper, 1/2 in, black PE jacket (Halogen free jacketing) Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMAX, SCADA, Mobile Antennas, Sat Comms , Radio Amateur ,PMR 2 way Radio) requiring an easily routed, low loss high performance RF cable Performance Note Attenuation values typical, guaranteed within 5% dc Resistance, Inner Conductor 1.48 ohms/km | 0.451 ohms/kft dc Resistance, Outer Conductor 2.69 ohms/km | 0.82 ohms/kft Installation temperature -40 °C to +60 °C (-40 °F to +140 °F) Operating Temperature -55 °C to +85 °C (-67 °F to +185 °F) Average Power, Inner Conductor Temperature 212 °F | 100 °C This cable assembly has N type Male and Female Con