Free eBay listing template designed by dewiso.com
Image

#####
-Check the voltage of the power supply-
Please check the power supply voltage in the product specifications.
In most cases, the power supply voltage is compatible with AC 100V.
In that case, if the power supply voltage in your area is 100V to 110V, there should be no problem.
However, please note that if the power supply voltage is 120V or higher, you will need a step-down transformer.

-Item Condition-
The unit powers on but does not turn on properly.
Other functions have not been confirmed.

There are scratches and dirt, but overall it is still in relatively good cosmetic condition.
Please review all photos carefully before bidding.

Included accessory: power cord only.

Due to the above condition, this item is sold as junk (as-is). No returns will be accepted.

-Specifications-
Type: Integrated DC Amplifier

Rated Output: 90W + 90W (8Ω, 10Hz–20kHz, THD 0.003%), 90W + 90W (8Ω, 1kHz, THD 0.002%)
Total Harmonic Distortion (10Hz–20kHz, rated output): 0.003% or less (8Ω)
Intermodulation Distortion (60Hz:7kHz = 4:1, SMPTE): 0.003% or less (8Ω)
Output Bandwidth (IHF, both channels driven, THD 0.02%): 5Hz–70kHz (8Ω)
Damping Factor (new IHF, 20Hz–20kHz): 100 (8Ω)
Frequency Response (1W): DC–300kHz (+0, -3dB)
Envelope Distortion: Below measurement limit
TIM Distortion (Sawtooth method): Below measurement limit
Slew Rate: ±180V/μsec (8Ω)
Rise Time: 0.8μsec

Input Sensitivity / Impedance (1kHz):
Phono 1, 2 MM: 2.5mV / 47kΩ
Phono 1, 2 MC: 120μV / 3–40Ω
Tuner, Aux/DA, Tape/PCM Play 1, 2: 250mV / 27kΩ

Maximum Phono Input (1kHz, THD 0.01%):
MM: 200mV
MC: 10mV (transformer type)

Output Level / Impedance (1kHz): Tape Rec (PIN): 250mV (47kΩ) / 600Ω

Total Harmonic Distortion (20Hz–20kHz, 5V output):
Phono 1, 2 MM: 0.005% or less
Phono 1, 2 MC: transformer type

RIAA Deviation (MM, Rec Out): 20Hz–300kHz ±0.2dB

Signal-to-Noise Ratio (A-weighted, short-circuit):
Phono 1, 2 MM: 88dB or more
Phono 1, 2 MC: 79dB or more (120μV)
Tuner, Aux/DA, Tape/PCM Play: 110dB or more

Input-Referred Noise (A-weighted, short-circuit):
Phono 1, 2 MM: -140dBV
Phono 1, 2 MC: -157dBV

Channel Separation (1kHz):
Phono 1, 2 MM: 60dB or more
Phono 1, 2 MC: 50dB or more
Tuner, Aux/DA, Tape/PCM Play: 80dB or more

Tone Control:
Bass: ±6dB (50Hz)
Treble: ±6dB (10kHz)

Filter: Low 16Hz (-3dB, 6dB/oct)
Audio Muting: -20dB

General:
Power Consumption: 220W
Dimensions: 460 × 160 × 404 mm (W × H × D)
Weight: 13.5 kg
#####

Image

Payment Information

We only accept PayPal payments.
Please pay within 5 days after the auction closed.

Image

Shipping & Handling

Generally, all items will be shipped within 10 business days after purchase confirmation. There may be exceptions, such as pre-order items, and in such cases we will endeavour to notify you in advance.

Image

Return Policy

We accept returns within 30 days of the item’s arrival, provided the item remains unopened.

Image

Customs and Duties

For buyers in the United States:
The following applies to items under $2500. Items over $2500 will be subject to customs duties, just like buyers outside the US.
Import duties and taxes are included in the item price or shipping cost.
Items shipped to the U.S. are sent under the Delivered Duty Paid (DDP) method, which means all import-related charges are prepaid.
You don’t need to pay any additional fees when your order arrives.
For buyers outside the United States:
Import duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer’s responsibility.
Please check with your country’s customs office to determine what these additional costs will be before bidding or buying.

I do not mark merchandise values below value or mark items as gifts International government regulations prohibit such behavior.