Specification:

Diameter: 1"

Thickness: 1"

Attachment Type: 1/4" Shank

Grit: 60/80/120/240 Grit (10 pcs of each type)

Quantity: 40 Pcs

Use On: Die Grinder 

Product Description:

MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders.
PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency.
USE FOR: Wheel can remove paint and sand, grind, level, and strip surfaces and makes quick work of it. These wheels style disks make use easy.
Wide Application: Widely used for flap sander wheels for the stripping of old layers of paint ,during resurfacing project, sanding, finishing contoured wood surfaces, clean up welds and cuts in iron, stainless steel and metal alloys.
Flap Wheel Set: The sanding wheel set contains 4 grits of flap wheel: 60#,80#,120#, 240#.

Package Including:

40 Pack 1" x 1" x 1/4" Flap Wheels

Notes:

1. Before use, soak the gauze in 40°-60°C water for 2~3 minutes to fully damp the gauze, increase the toughness, extend the service life by 30%, reduce processing dust, and no fragmentation.

2. Pay attention to the direction of the blades during installation, and avoid the inability to operate normally due to reverse installation. (The correct installation method: the blade is inclined from the outside to the inside, which is consistent with the rotation direction of the device)

3. Run idling for 1 minute before use, and observe whether the rotating head of the electric grinder is installed in the correct direction.

4. Please wear a mask and protective glasses before operation to prevent debris from entering your eyes, mouth and nose.