Product Name: Duplicate Remote Control
Material: plastic, alloy
Dimensions: 5.4×2.9×1.4 (cm)
Function:
Note (the remote control can be used if it is not a rolling code),
The remote control cannot be used with a rolling code (the rolling code is a chip with a non-disclosure agreement)
Latest IC programming code to prevent accidental removal.
This is a fixed frequency remote 433MHz cloner for duplicating 99.99% of common fixed and learning code remotes.
Clone up to 2 remote control signals from 2 different remote controls
The
remote control has a wide range of uses, mainly remote control electric
retractable doors, remote control railings, remote control shutter
doors, garage doors, remote control LED lights, remote control fireworks
igniters, remote control passenger doors, anti-anti-theft alarms,
electric door alarms, MP3 motorcycle anti-theft alarms etc. In addition,
it can also be used as a 4-channel radio control machine for
automobiles (additional remote control roof, additional remote control
products), heating systems, home automation, etc.
Parameters:
Working voltage: DC12V (built-in 27A12V battery)
Working current: 10mA
Radiation power: 10mw
Transmission frequency: 433MHZ
Transmission distance: 50-100M (in open areas, the sensitivity of the receiving device is negative 100dbm)
Encoder type: fixed encoding. learn to code
Accessories List: 1 x Duplicate Remote Control
other instructions:
How to program:
1. Delete the history code of the copy machine.
Press the A and B buttons in succession until the LED flashes 3 times.
Leave the B key (press and hold the A key), press the B key 3 times slowly, and the LED will flash.
Leave the A key to clear the code gap.
If the clear code is correct, please short press any key. Lights won't flicker.
If the light is flashing, the short press of any button release process is wrong. Please try the sharing process again.
2. Copy the code from the original site.
Place the clone remote and the original remote side by side. Make sure they are touching.
Press
and hold one button on the original remote and one button on the cloned
remote until the remote blinks continuously on the cloned LED.
The red LED will blink 3 times quickly, then pause for one second, then blink steadily.
Release both buttons. Programming succeeded. Duplicate other buttons in the same way











