DC12V Counter Grating Display Meter + Length Wheel + Encoder + Support Kits

This kits can measure the distance or length by the rotation of the wheel

kits display resolution can provide a few types follow : 

1m 、0.1m ( 1dm )、0.01m ( 1cm ) 、0.001m（1mm）、

0.1ft 、0.01ft 、0.1inch 、1inch  

You can choose one note on Ebay order    

Specifications:
----------------------------------------------------

Display Meter :

Part Number : HB961
Display:  Red LED 0.56'' x 6
Power Supply : DC12V, 
Relay contact capacity: AC250V 3A (resistive load), 
the life expectancy of 10000times
frequency 30KHz (raster table 15KHz)
Display Range: -19999.9m to 99999.9m, overrun "EEEEEE"
The HB961 instrument can be set magnification A magnification b, 
initial value of C, the decimal point dot the instrument display value = pulse input value x A. ÷ b + C
Ambient temperature: 0 ℃ ~ +50 ℃, relative humidity ≤ 85%. No corrosive gases

HB961 instrument has a plus or minus count, identifiable phase counting (grating tables) two kinds of functions
Input signal: switch-level pulse (low level:-30V to +0.6 V HIGH: +4 V ~ +30 V)
can be external photoelectric tube, proximity switches, 
Hall sensor, angle, linear displacement grating sensors, encoder and external supply 5V
12V DC voltage or 30mA DC current
HB961 instrument current count value, counting alarm value, non-volatile count parameter values
HB961 meter relay output, two relay J1 There are three kinds of output, relay J2 11 kinds of output mode

The J1 J2 relay can operate with you want the count value

J1 J2 can be connected to alarm lights, bells, and other device

More data and instructions please refer to the manual

-----------------------------------------------------

Encoder:

Resolution: 600 p/r
Power source: 5-24 VDC
Shaft: 6mm Dia, 15mm Length
Size: 40mm Dia, 37mm Length 
Output : A B  2 phase output rectangular orthogonal pulse circuit,
the output for the NPN open collector output type
Maximum mechanical speed: 6000 R / min
response frequency: 0-20KHz
Cable length: 1 meter 4-core shielded cable ，（ If you need a longer more cable contact me please）
Vcc: + power, V0: ground ,Connection color is clearly marked on nameplate ,
A B 2 phase output must not be directly connected with VCC, otherwise, 
will burn the output triode.

--------------------------------------------------------

Length Wheel

Material: Aluminum alloy + Rubber surrounded
Circumference : 303mm  /   12'' inch /   1 ft'   

----------------------------------------------------------

package:

6 Digital LED Counter Grating Encoder Display Meter x 1 Pc
English Manual x 1 Pc
 Length Wheel x 1 Pc
600P Encoder x 1 Pc
Encoder  90° Support x 1 Pc