Up for sale is a great Humanscale Model MF2, 3 monitor arm set with 2 sliders (for even more adjustment capabilities). They are silver metal with grey trim, very heavy duty, and are the top-of-the line monitor arms. These have been removed from use due to a corporate office move, and were lightly used due to hybrid work environment (post COVID). These slightly used sets have minimal scuffs (unseen when monitors are installed).
This set lists for a similar configuration for $1,286 on the manufacturer's site, and typically sells retail for $800. At my listed price you will save hundreds of dollars for these superior quality monitor arms!
https://www.humanscale.com/products/mflex-m21-monitor-arm-configurator.cfm?configuration=X2NTNCCSNSBFTBFTB12-------------------&_gl=1*2419xx*_up*MQ..*_gs*MQ..&gclid=EAIaIQobChMI55aJ-ozzigMVmWpHAR30VTZmEAAYASAAEgKxa_D_BwE&gclsrc=aw.ds
See the photo's for typical use of these arms. Those set up in the photos were from before the units were taken out of use. You can mount 2 very large (27" shown in photo) monitors, or 3 smaller monitors with what your receive (we had 19" units for that configuration, but combinations are extensive). They all have VESA plates, which work with all Dell and similar style monitors without the use of any spacers. They also have the ball joint mounting unit installed which allows monitors to be rotated 90 degrees very easily.
If you do not need arms with this amount of distance between the arms nor the spin knuckles, take a look at my other listings for lower cost sets that may meet your specific needs.
The distance between centers of the vesa plates is 66" from most left to most right. Each plate is 33" from the center post at its furthest. You can use these measurements to determine if your specific monitor configuration will fit as desired. If you have two very large monitors they would easily fit. We had two 27" monitors on the two sides and a 19" in the middle, often in portrait mode.
The only tools required for installation and adjustment is a small hex key set (included). This model has the clamp-on mount, and fits any table with a thickness up to 4". They also have cable management troughs with covers and a cable ring organizer.
If you prefer pickup over shipping let me know and I will post without the shipping costs. I will drive up to 30 miles for the purchase of 5 units, up to 60 miles for purchase of 10, and 120 miles for 20 or more from zip code 17316. We can also meet halfway to double the pickup/delivery range. Again, contact me and we can make agreeable arrangements. I currently have 40 of these in stock (I list 5 at a time to allow Ebay shipping of units together, let me know if you desire more and I will put out multiple listings), quantity discounts are shown on listing. I have sold 50 already, so they are going fast at this great price.
Any questions, please feel free to ask.
These units are true beauties, you will not be disappointed!