Features:
    • ​Garmin Edge mount for Pinarello's MOst Talon Ultra Fast handlebars.
    • Aerodynamic, lightweight and a fully integrated design to complete the look of your Dogma F.
    • Suitable for Garmin Edge devices (small/medium): 130 Plus, 530, 540, 550, 830, 840, 850.
    • Designed specifically for the MOst Talon Ultra Fast cockpit on the 2025 Dogma F.
    • Will not fit the older Talon Ultra cockpit on the Dogma F (2021-24) or Dogma F12.
The Garmin device, tether and handlebars pictured are for reference only and not supplied.

Supplied
  • 1x 3D printed mount.
  • 2x M5x25mm button head screws - black stainless steel.
Overview
The MOst Talon Ultra Fast handlebars are a one-piece carbon handlebar and stem fitted to the 2025 Pinarello Dogma F road bike, updated in design from the MOst Talon Ultra handlebars fitted to the 2024 Dogma F. This MagCAD Talon Ultra Fast mount is designed to fully integrate with the Ultra Fast handlebars, minimising aerodynamic drag and providing a secure mount for your GPS computer.

The MOst Talon Ultra Fast handlebars have two M5 inserts on the underside, left and right of the stem, for a computer mount to attach to. We have a different version mount for the older Talon Ultra handlebars found on the Dogma F (2021-24) and Dogma F12.

Please Note: This MagCAD Ultra Fast Mount will not fit the Talon Ultra handlebars on the Dogma F (2021-24) or Dogma F12.

This MagCAD mount is designed to suit Garmin Edge devices up to the size of the 550/850. There is a longer version of this mount designed specifically for the Garmin 1040/1050.

When fitted to the MOst Talon Ultra Fast cockpit your computer tilts backwards approximately 4 degrees from horizontal. This subtle tilt dramatically reduces screen glare. Exact position and angle will vary depending on several factors.

​Application
Simply attach to the underside of your MOst Talon Ultra Fast handlebars with two M5 x 25mm button head screws, provided. These are longer in length than the screws supplied with your Talon Ultra Fast handlebars. We recommend using a thread locking compound like Loctite to secure the screws and avoid overtightening. Periodically check the screw remains tight and secure.

All Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use.

Compatible With:
  • Garmin Edge devices (small/medium): 130 Plus, 530, 540, 550, 830, 840, 850.
  • MOst Talon Ultra Fast handlebars (Dogma F 2025-).
  • Not compatible with the MOst Talon Ultra Handlebars (Dogma F 2021-24 or Dogma F12).
Specifications
  • Weight: 39 grams (without hardware), 48 grams (with hardware).
Disclaimer

This product and/or service is not affiliated with, endorsed by or in any way associated with Cicli Pinarello S.p.A or their products and services. Pinarello and their respective logos are trademarks or registered trademarks of Cicli Pinarello S.p.A.

Material
MagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts.
​
About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Feel free to get in contact with any questions or feedback. Individual customisation will be considered.

Delivery
All items in stock and dispatched promptly, usually the same day.

Returns
Should you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.