Features:
  • Headset bearing cover for the ENVE IN-Route system and Cannondale SuperSix EVO Gen 4 (2023-2025).
  • Allows you to mount any ENVE IN-Route stem or one-piece cockpit to your Cannondale SuperSix EVO Gen 4 (2023-2025).
  • Some additional headset modifications may be required, see below.
  • Replaces the Cannondale OEM Headset Bearing Cover (code: K28052), therefore may be compatible with other Cannondale bikes but yet to be confirmed.
The ENVE Aero Road IN-Route stem and ENVE spacers are pictured for reference only and not included in this listing. We have our own 3D printed ENVE compatible spacers that can be purchased separately, details below. Otherwise this bearing cover is compatible with the OEM spacer purchased directly from ENVE.

What's Included
  • 1x 3D printed bearing cover.
Overview
This MagCAD top bearing cover allows you to mount a compatible ENVE IN-Route stem or one-piece cockpit to your Cannondale SuperSix EVO Gen 4 (2023-2025) road bike. To complete the conversion, some additional headset modifications may be required, outside the scope of the MagCAD bearing cover. See Application section below for more details.

This MagCAD top bearing cover is 10mm in height. The ENVE stem can be fitted directly on top for a "slammed" low stack height setup or fitted with ENVE IN-Route spacers, not supplied, for a taller headset stack height.

OEM ENVE spacers, which are a split design, and can be purchased from ENVE directly. Otherwise we have both 5mm and 10mm 3D printed non split spacers available to purchase separately, depending on how many are required for your particular installation.

This MagCAD top bearing cover is designed as a replacement for the Cannondale OEM Headset Bearing Cover (code: K28052). Therefore, it may fit other Cannondale models that use the same OEM bearing cover but this has yet to be confirmed.

Please note: This MagCAD Top Bearing Cover is designed for electronic shifting and the internal routing of two hydraulic hoses. The cable routing is tight when used in a slammed low stack setup. This bearing cover does not support the additional cables for mechanical shifting.

​Application
All MagCAD headset parts are 3D printed in a durable Nylon to ensure they are robust to many years of use. As with any steering related components they should be installed by a competent mechanic and inspected regularly. Incorrect assembly or mis-use may result in damage to the headset components and/or injury.

Particular care should be taken to ensure the internal cable routing is installed correctly and checked periodically.

Please note: This MagCAD bearing cover replaces the OEM Cannondale bearing cover but some further modification may be needed to the remaining headset assembly to complete the conversion. The Cannondale Delta Filler pieces should remain compatible but the ENVE top cap may need modification to work with the Cannondale Delta expander. Take care to follow the Cannondale instructions closely, any modifications are made at your own risk.

Compatible With:
  • ENVE IN-Route Stems - Aero Road, High Rise.
  • ENVE IN-Route Cockpits - SES AR, SES Aero Pro.
  • Cannondale SuperSix EVO Gen 4 (2023-2025) road bike.
Specifications
  • Weight: 10 grams.
Disclaimer
This product and/or service is not affiliated with, endorsed by or in any way associated with Cannondale Bicycle Corporation, Enve Composites LLC, or their products and services. Cannondale, Enve and their respective logos are trademarks or registered trademarks of Cannondale Bicycle Corporation and Enve Composites LLC.

Material
MagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts.

Customisation
As with all MagCAD items it's more than possible to tweak or change the design to suit your particular installation. Feel free to get in contact for more details.

About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Delivery
All items in stock and dispatched promptly, usually the same day.

Returns
Should you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.